[PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI

[PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI

[Sanchayan Maity]

Remove the use of DDC I2C bus bitbang to support reading of EDID
and rely on support from internal HDMI I2C master controller instead.
As a result remove the device tree property ddc-i2c-bus.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
---
Changes since v1:

Change the ranking in i2c aliases

v1: https://lkml.org/lkml/2016/9/14/55
---
 arch/arm/boot/dts/imx6q-apalis-ixora.dts | 12 +++---------
 arch/arm/boot/dts/imx6qdl-apalis.dtsi    | 25 +++++++++----------------
 2 files changed, 12 insertions(+), 25 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 207b85b..82b81e0 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -55,10 +55,9 @@
 		     "fsl,imx6q";
 
 	aliases {
-		i2c0 = &i2cddc;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
 	};
 
 	aliases {
@@ -186,11 +185,6 @@
 };
 
 &hdmi {
-	ddc-i2c-bus = <&i2cddc>;
-	status = "okay";
-};
-
-&i2cddc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 99e323b..8c67dd8 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -53,18 +53,6 @@
 		status = "disabled";
 	};
 
-	/* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
-	i2cddc: i2c@0 {
-		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_ddc>;
-		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
-			 &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		status = "disabled";
-	};
-
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "1P8V";
@@ -209,6 +197,12 @@
 	};
 };
 
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_ddc>;
+	status = "disabled";
+};
+
 /*
  * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
  * board)
@@ -633,11 +627,10 @@
 		>;
 	};
 
-	pinctrl_i2c_ddc: gpioi2cddcgrp {
+	pinctrl_hdmi_ddc: hdmiddcgrp {
 		fsl,pins = <
-			/* DDC bitbang */
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
-			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
+			MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
 		>;
 	};
 
-- 
2.9.3

[PATCH v2 2/3] ARM: dts: imx6q-apalis-ixora: Remove use of pwm-leds

[Sanchayan Maity]

Remove use of pwm-leds and use the standard /sys/class/pwm
interface from PWM subsystem.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
v1: https://lkml.org/lkml/2016/9/14/55
---
 arch/arm/boot/dts/imx6q-apalis-ixora.dts | 22 ----------------------
 1 file changed, 22 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 82b81e0..383192c 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -146,28 +146,6 @@
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		ledpwm1 {
-			label = "PWM1";
-			pwms = <&pwm1 0 50000>;
-			max-brightness = <255>;
-		};
-
-		ledpwm2 {
-			label = "PWM2";
-			pwms = <&pwm2 0 50000>;
-			max-brightness = <255>;
-		};
-
-		ledpwm3 {
-			label = "PWM3";
-			pwms = <&pwm3 0 50000>;
-			max-brightness = <255>;
-		};
-	};
 };
 
 &backlight {
-- 
2.9.3

Re: [PATCH v2 2/3] ARM: dts: imx6q-apalis-ixora: Remove use of pwm-leds

[Shawn Guo]

On Mon, Sep 19, 2016 at 10:41:52AM +0530, Sanchayan Maity wrote:
> Remove use of pwm-leds and use the standard /sys/class/pwm
> interface from PWM subsystem.
> 
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Applied, thanks.

Re: [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI

[Marcel Ziswiler]

On Mon, 2016-09-19 at 10:41 +0530, Sanchayan Maity wrote:
> Remove the use of DDC I2C bus bitbang to support reading of EDID
> and rely on support from internal HDMI I2C master controller instead.
> As a result remove the device tree property ddc-i2c-bus.
> 
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>

Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

> ---
> Changes since v1:
> 
> Change the ranking in i2c aliases
> 
> v1: https://lkml.org/lkml/2016/9/14/55
> ---
>  arch/arm/boot/dts/imx6q-apalis-ixora.dts | 12 +++---------
>  arch/arm/boot/dts/imx6qdl-apalis.dtsi    | 25 +++++++++-------------
> ---
>  2 files changed, 12 insertions(+), 25 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> index 207b85b..82b81e0 100644
> --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> @@ -55,10 +55,9 @@
>  		     "fsl,imx6q";
>  
>  	aliases {
> -		i2c0 = &i2cddc;
> -		i2c1 = &i2c1;
> -		i2c2 = &i2c2;
> -		i2c3 = &i2c3;
> +		i2c0 = &i2c1;
> +		i2c1 = &i2c2;
> +		i2c2 = &i2c3;
>  	};
>  
>  	aliases {
> @@ -186,11 +185,6 @@
>  };
>  
>  &hdmi {
> -	ddc-i2c-bus = <&i2cddc>;
> -	status = "okay";
> -};
> -
> -&i2cddc {
>  	status = "okay";
>  };
>  
> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> index 99e323b..8c67dd8 100644
> --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> @@ -53,18 +53,6 @@
>  		status = "disabled";
>  	};
>  
> -	/* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
> -	i2cddc: i2c@0 {
> -		compatible = "i2c-gpio";
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pinctrl_i2c_ddc>;
> -		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
> -			 &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
> -			>;
> -		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
> -		status = "disabled";
> -	};
> -
>  	reg_1p8v: regulator-1p8v {
>  		compatible = "regulator-fixed";
>  		regulator-name = "1P8V";
> @@ -209,6 +197,12 @@
>  	};
>  };
>  
> +&hdmi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hdmi_ddc>;
> +	status = "disabled";
> +};
> +
>  /*
>   * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
>   * board)
> @@ -633,11 +627,10 @@
>  		>;
>  	};
>  
> -	pinctrl_i2c_ddc: gpioi2cddcgrp {
> +	pinctrl_hdmi_ddc: hdmiddcgrp {
>  		fsl,pins = <
> -			/* DDC bitbang */
> -			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
> -			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
> +			MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL
> 0x4001b8b1
> +			MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA
> 0x4001b8b1
>  		>;
>  	};
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/3] ARM: dts: imx6qdl-apalis: Use enable-gpios property for backlight

[Sanchayan Maity]

Use enable-gpios property of PWM backlight driver for backlight
control.

Signed-off-by: Sanchayan Maity <maitysanchayan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Changes since v1:

Fix commit message

v1: https://lkml.org/lkml/2016/9/14/55
---
 arch/arm/boot/dts/imx6qdl-apalis.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 8c67dd8..9100bde 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -49,7 +49,10 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
 		pwms = <&pwm4 0 5000000>;
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 	};
 
@@ -614,6 +617,12 @@
 		>;
 	};
 
+	pinctrl_gpio_bl_on: gpioblon {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio1io04grp {
 		fsl,pins = <
 			/* Power button */
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 3/3] ARM: dts: imx6qdl-apalis: Use enable-gpios property for backlight

[Shawn Guo]

On Mon, Sep 19, 2016 at 10:41:53AM +0530, Sanchayan Maity wrote:
> Use enable-gpios property of PWM backlight driver for backlight
> control.
> 
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>

Applied, thanks.

Re: [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI

[maitysanchayan-Re5JQEeQqe8AvxtiuMwx3w]

Hello,

Ping?

- Sanchayan.

On 16-09-19 10:41:51, Sanchayan Maity wrote:
> Remove the use of DDC I2C bus bitbang to support reading of EDID
> and rely on support from internal HDMI I2C master controller instead.
> As a result remove the device tree property ddc-i2c-bus.
> 
> Signed-off-by: Sanchayan Maity <maitysanchayan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
> Changes since v1:
> 
> Change the ranking in i2c aliases
> 
> v1: https://lkml.org/lkml/2016/9/14/55
> ---
>  arch/arm/boot/dts/imx6q-apalis-ixora.dts | 12 +++---------
>  arch/arm/boot/dts/imx6qdl-apalis.dtsi    | 25 +++++++++----------------
>  2 files changed, 12 insertions(+), 25 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> index 207b85b..82b81e0 100644
> --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> @@ -55,10 +55,9 @@
>  		     "fsl,imx6q";
>  
>  	aliases {
> -		i2c0 = &i2cddc;
> -		i2c1 = &i2c1;
> -		i2c2 = &i2c2;
> -		i2c3 = &i2c3;
> +		i2c0 = &i2c1;
> +		i2c1 = &i2c2;
> +		i2c2 = &i2c3;
>  	};
>  
>  	aliases {
> @@ -186,11 +185,6 @@
>  };
>  
>  &hdmi {
> -	ddc-i2c-bus = <&i2cddc>;
> -	status = "okay";
> -};
> -
> -&i2cddc {
>  	status = "okay";
>  };
>  
> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> index 99e323b..8c67dd8 100644
> --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> @@ -53,18 +53,6 @@
>  		status = "disabled";
>  	};
>  
> -	/* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
> -	i2cddc: i2c@0 {
> -		compatible = "i2c-gpio";
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pinctrl_i2c_ddc>;
> -		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
> -			 &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
> -			>;
> -		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
> -		status = "disabled";
> -	};
> -
>  	reg_1p8v: regulator-1p8v {
>  		compatible = "regulator-fixed";
>  		regulator-name = "1P8V";
> @@ -209,6 +197,12 @@
>  	};
>  };
>  
> +&hdmi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hdmi_ddc>;
> +	status = "disabled";
> +};
> +
>  /*
>   * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
>   * board)
> @@ -633,11 +627,10 @@
>  		>;
>  	};
>  
> -	pinctrl_i2c_ddc: gpioi2cddcgrp {
> +	pinctrl_hdmi_ddc: hdmiddcgrp {
>  		fsl,pins = <
> -			/* DDC bitbang */
> -			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
> -			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
> +			MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
> +			MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
>  		>;
>  	};
>  
> -- 
> 2.9.3
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI

[Shawn Guo]

On Mon, Sep 19, 2016 at 10:41:51AM +0530, Sanchayan Maity wrote:
> Remove the use of DDC I2C bus bitbang to support reading of EDID
> and rely on support from internal HDMI I2C master controller instead.
> As a result remove the device tree property ddc-i2c-bus.
> 
> Signed-off-by: Sanchayan Maity <maitysanchayan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

I think that the dw-hdmi i2c support [1] is a prerequisite of this
patch.  I do not see it lands on v4.9-rc1.  Or am I missing something?

Shawn

[1] https://patchwork.kernel.org/patch/9296883/

> ---
> Changes since v1:
> 
> Change the ranking in i2c aliases
> 
> v1: https://lkml.org/lkml/2016/9/14/55
> ---
>  arch/arm/boot/dts/imx6q-apalis-ixora.dts | 12 +++---------
>  arch/arm/boot/dts/imx6qdl-apalis.dtsi    | 25 +++++++++----------------
>  2 files changed, 12 insertions(+), 25 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> index 207b85b..82b81e0 100644
> --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
> @@ -55,10 +55,9 @@
>  		     "fsl,imx6q";
>  
>  	aliases {
> -		i2c0 = &i2cddc;
> -		i2c1 = &i2c1;
> -		i2c2 = &i2c2;
> -		i2c3 = &i2c3;
> +		i2c0 = &i2c1;
> +		i2c1 = &i2c2;
> +		i2c2 = &i2c3;
>  	};
>  
>  	aliases {
> @@ -186,11 +185,6 @@
>  };
>  
>  &hdmi {
> -	ddc-i2c-bus = <&i2cddc>;
> -	status = "okay";
> -};
> -
> -&i2cddc {
>  	status = "okay";
>  };
>  
> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> index 99e323b..8c67dd8 100644
> --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> @@ -53,18 +53,6 @@
>  		status = "disabled";
>  	};
>  
> -	/* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
> -	i2cddc: i2c@0 {
> -		compatible = "i2c-gpio";
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pinctrl_i2c_ddc>;
> -		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
> -			 &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
> -			>;
> -		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
> -		status = "disabled";
> -	};
> -
>  	reg_1p8v: regulator-1p8v {
>  		compatible = "regulator-fixed";
>  		regulator-name = "1P8V";
> @@ -209,6 +197,12 @@
>  	};
>  };
>  
> +&hdmi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hdmi_ddc>;
> +	status = "disabled";
> +};
> +
>  /*
>   * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
>   * board)
> @@ -633,11 +627,10 @@
>  		>;
>  	};
>  
> -	pinctrl_i2c_ddc: gpioi2cddcgrp {
> +	pinctrl_hdmi_ddc: hdmiddcgrp {
>  		fsl,pins = <
> -			/* DDC bitbang */
> -			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
> -			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
> +			MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
> +			MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
>  		>;
>  	};
>  
> -- 
> 2.9.3
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI

[Vladimir Zapolskiy]

Hi Shawn,

On 10/22/2016 06:25 AM, Shawn Guo wrote:
> On Mon, Sep 19, 2016 at 10:41:51AM +0530, Sanchayan Maity wrote:
>> Remove the use of DDC I2C bus bitbang to support reading of EDID
>> and rely on support from internal HDMI I2C master controller instead.
>> As a result remove the device tree property ddc-i2c-bus.
>>
>> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
>
> I think that the dw-hdmi i2c support [1] is a prerequisite of this
> patch.  I do not see it lands on v4.9-rc1.  Or am I missing something?
>
> Shawn
>
> [1] https://patchwork.kernel.org/patch/9296883/
>

I'm adding Philipp to Cc, since he is the last one who tested the change
and helped me to push the change to the mainline:

   https://lists.freedesktop.org/archives/dri-devel/2016-September/118569.html

The problem is that there is no official DW HDMI bridge maintainer, may be
you can review the change, and if you find it satisfactory push it through
ARM/iMX tree.

--
With best wishes,
Vladimir

Re: [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI

[maitysanchayan-Re5JQEeQqe8AvxtiuMwx3w]

Hello Shawn,

On 16-10-22 15:43:04, Vladimir Zapolskiy wrote:
> Hi Shawn,
> 
> On 10/22/2016 06:25 AM, Shawn Guo wrote:
> > On Mon, Sep 19, 2016 at 10:41:51AM +0530, Sanchayan Maity wrote:
> > > Remove the use of DDC I2C bus bitbang to support reading of EDID
> > > and rely on support from internal HDMI I2C master controller instead.
> > > As a result remove the device tree property ddc-i2c-bus.
> > > 
> > > Signed-off-by: Sanchayan Maity <maitysanchayan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > 
> > I think that the dw-hdmi i2c support [1] is a prerequisite of this
> > patch.  I do not see it lands on v4.9-rc1.  Or am I missing something?
> > 
> > Shawn
> > 
> > [1] https://patchwork.kernel.org/patch/9296883/
> > 
> 
> I'm adding Philipp to Cc, since he is the last one who tested the change
> and helped me to push the change to the mainline:
> 
>   https://lists.freedesktop.org/archives/dri-devel/2016-September/118569.html
> 
> The problem is that there is no official DW HDMI bridge maintainer, may be
> you can review the change, and if you find it satisfactory push it through
> ARM/iMX tree.

Shawn, is it okay if that patch goes through your ARM/iMX tree?

- Sanchayan.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI

[Stefan Agner]

On 2016-11-08 09:33, maitysanchayan@gmail.com wrote:
> Hello Shawn,
> 
> On 16-10-22 15:43:04, Vladimir Zapolskiy wrote:
>> Hi Shawn,
>>
>> On 10/22/2016 06:25 AM, Shawn Guo wrote:
>> > On Mon, Sep 19, 2016 at 10:41:51AM +0530, Sanchayan Maity wrote:
>> > > Remove the use of DDC I2C bus bitbang to support reading of EDID
>> > > and rely on support from internal HDMI I2C master controller instead.
>> > > As a result remove the device tree property ddc-i2c-bus.
>> > >
>> > > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
>> >
>> > I think that the dw-hdmi i2c support [1] is a prerequisite of this
>> > patch.  I do not see it lands on v4.9-rc1.  Or am I missing something?
>> >
>> > Shawn
>> >
>> > [1] https://patchwork.kernel.org/patch/9296883/
>> >
>>
>> I'm adding Philipp to Cc, since he is the last one who tested the change
>> and helped me to push the change to the mainline:
>>
>>   https://lists.freedesktop.org/archives/dri-devel/2016-September/118569.html
>>
>> The problem is that there is no official DW HDMI bridge maintainer, may be
>> you can review the change, and if you find it satisfactory push it through
>> ARM/iMX tree.
> 
> Shawn, is it okay if that patch goes through your ARM/iMX tree?

I don't think it makes sense that the DRM bridge changes go through
Shawn's tree. Dave should merge Philipps pull request...

--
Stefan

Re: [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI

[Vladimir Zapolskiy]

Hi Stefan, Philipp,

On 11/09/2016 02:50 AM, Stefan Agner wrote:
> On 2016-11-08 09:33, maitysanchayan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
>> Hello Shawn,
>>
>> On 16-10-22 15:43:04, Vladimir Zapolskiy wrote:
>>> Hi Shawn,
>>>
>>> On 10/22/2016 06:25 AM, Shawn Guo wrote:
>>>> On Mon, Sep 19, 2016 at 10:41:51AM +0530, Sanchayan Maity wrote:
>>>>> Remove the use of DDC I2C bus bitbang to support reading of EDID
>>>>> and rely on support from internal HDMI I2C master controller instead.
>>>>> As a result remove the device tree property ddc-i2c-bus.
>>>>>
>>>>> Signed-off-by: Sanchayan Maity <maitysanchayan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>>>
>>>> I think that the dw-hdmi i2c support [1] is a prerequisite of this
>>>> patch.  I do not see it lands on v4.9-rc1.  Or am I missing something?
>>>>
>>>> Shawn
>>>>
>>>> [1] https://patchwork.kernel.org/patch/9296883/
>>>>
>>>
>>> I'm adding Philipp to Cc, since he is the last one who tested the change
>>> and helped me to push the change to the mainline:
>>>
>>>   https://lists.freedesktop.org/archives/dri-devel/2016-September/118569.html
>>>
>>> The problem is that there is no official DW HDMI bridge maintainer, may be
>>> you can review the change, and if you find it satisfactory push it through
>>> ARM/iMX tree.
>>
>> Shawn, is it okay if that patch goes through your ARM/iMX tree?
>
> I don't think it makes sense that the DRM bridge changes go through
> Shawn's tree. Dave should merge Philipps pull request...
>

Philipp, do you mind to submit a rebased pull request one more time?

--
With best wishes,
Vladimir
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI

[Stefan Agner]

On 2016-11-10 10:29, Vladimir Zapolskiy wrote:
> Hi Stefan, Philipp,
> 
> On 11/09/2016 02:50 AM, Stefan Agner wrote:
>> On 2016-11-08 09:33, maitysanchayan@gmail.com wrote:
>>> Hello Shawn,
>>> 
>>> On 16-10-22 15:43:04, Vladimir Zapolskiy wrote:
>>>> Hi Shawn,
>>>> 
>>>> On 10/22/2016 06:25 AM, Shawn Guo wrote:
>>>>> On Mon, Sep 19, 2016 at 10:41:51AM +0530, Sanchayan Maity wrote:
>>>>>> Remove the use of DDC I2C bus bitbang to support reading of EDID
>>>>>> and rely on support from internal HDMI I2C master controller instead.
>>>>>> As a result remove the device tree property ddc-i2c-bus.
>>>>>> 
>>>>>> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
>>>>> 
>>>>> I think that the dw-hdmi i2c support [1] is a prerequisite of this
>>>>> patch.  I do not see it lands on v4.9-rc1.  Or am I missing something?
>>>>> 
>>>>> Shawn
>>>>> 
>>>>> [1] https://patchwork.kernel.org/patch/9296883/
>>>>> 
>>>> 
>>>> I'm adding Philipp to Cc, since he is the last one who tested the change
>>>> and helped me to push the change to the mainline:
>>>> 
>>>>   https://lists.freedesktop.org/archives/dri-devel/2016-September/118569.html
>>>> 
>>>> The problem is that there is no official DW HDMI bridge maintainer, may be
>>>> you can review the change, and if you find it satisfactory push it through
>>>> ARM/iMX tree.
>>> 
>>> Shawn, is it okay if that patch goes through your ARM/iMX tree?
>> 
>> I don't think it makes sense that the DRM bridge changes go through
>> Shawn's tree. Dave should merge Philipps pull request...
>> 
> 
> Philipp, do you mind to submit a rebased pull request one more time?
> 

You probably saw it, Dave merged it today in his drm-next branch:
https://cgit.freedesktop.org/~airlied/linux/?h=drm-next

I guess with that Shawn can go ahead and merge this patchset for next
too...?

--
Stefan

Re: [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Do not rely on DDC I2C bus bitbang for HDMI

[Shawn Guo]

On Thu, Nov 10, 2016 at 08:27:50PM -0800, Stefan Agner wrote:
> You probably saw it, Dave merged it today in his drm-next branch:
> https://cgit.freedesktop.org/~airlied/linux/?h=drm-next
> 
> I guess with that Shawn can go ahead and merge this patchset for next
> too...?

I merged #2 and #3 a couple of weeks ago.  But for the first one, I have
to wait for the drm changes to appear on my tree, i.e. v4.10-rc1 likely.
Otherwise, HDMI will stop working on my tree if I apply that patch right
now.

So please ping me when drm changes are in place.

Shawn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html