From: Gary Bisson <gary.bisson@boundarydevices.com>
To: devicetree@vger.kernel.org
Cc: fabio.estevam@freescale.com, linux@arm.linux.org.uk,
Gary Bisson <gary.bisson@boundarydevices.com>,
robh+dt@kernel.org, kernel@pengutronix.de, shawnguo@kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/5] ARM: dts: imx: update Boundary Devices boards support
Date: Tue, 25 Oct 2016 23:19:50 +0200 [thread overview]
Message-ID: <20161025211955.5345-1-gary.bisson@boundarydevices.com> (raw)
Hi all,
This series includes several patches to update the support for our platforms.
Here are the main goals of this series:
1- Adding support for our latest SOM (SOM2)
2- Fix panel naming consistency across the boards
-> This way our U-Boot bootscript[1] can easily set the panel compatible.
3- Fix USB PHY reset for some boards
-> U-Boot used to always set the reset pin whether usb was used or not.
Anyway, the kernel should not be dependent on the bootloader.
Let me know if you have any question.
Regards,
Gary
[1] https://github.com/boundarydevices/u-boot-imx6/blob/boundary-v2016.03/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
Gary Bisson (5):
ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support
ARM: dts: imx6qdl-sabrelite: rename panel nodes
ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control
ARM: dts: imx6qdl-nitrogen6x: rename panel nodes
ARM: dts: imx6qdl-nitrogen6x: add missing USB PHY reset control
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 24 +-
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 24 +-
5 files changed, 868 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
--
2.9.3
next reply other threads:[~2016-10-25 21:19 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-25 21:19 Gary Bisson [this message]
2016-10-25 21:19 ` [PATCH 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support Gary Bisson
[not found] ` <20161025211955.5345-2-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-11-01 14:13 ` Shawn Guo
2016-11-01 14:54 ` Gary Bisson
[not found] ` <CAAMH-yugLeHjaSwMx9ZoJ9qm44VKXcgO64xdsO=HBj59pj5cUA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-02 7:35 ` Shawn Guo
2016-10-25 21:19 ` [PATCH 2/5] ARM: dts: imx6qdl-sabrelite: rename panel nodes Gary Bisson
2016-10-25 21:19 ` [PATCH 3/5] ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control Gary Bisson
[not found] ` <20161025211955.5345-4-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-10-25 21:28 ` Fabio Estevam
2016-10-25 21:53 ` Gary Bisson
[not found] ` <CAAMH-yu1oC8qaAtVwSxJxKxSmXMzMJkUeu4cUu3OB2yhDV8GBg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-01 14:17 ` Shawn Guo
2016-10-25 21:19 ` [PATCH 4/5] ARM: dts: imx6qdl-nitrogen6x: rename panel nodes Gary Bisson
2016-10-25 21:19 ` [PATCH 5/5] ARM: dts: imx6qdl-nitrogen6x: add missing USB PHY reset control Gary Bisson
[not found] ` <20161025211955.5345-1-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-11-01 17:10 ` [PATCH v2 0/5] ARM: dts: imx: update Boundary Devices boards support Gary Bisson
[not found] ` <20161101171006.24594-1-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2016-11-01 17:10 ` [PATCH v2 1/5] ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support Gary Bisson
2016-11-01 17:10 ` [PATCH v2 2/5] ARM: dts: imx6qdl-sabrelite: use hyphens for nodes name Gary Bisson
2016-11-01 17:10 ` [PATCH v2 3/5] ARM: dts: imx6qdl-nitrogen6x: " Gary Bisson
2016-11-01 17:10 ` [PATCH v2 4/5] ARM: dts: imx6qdl-nit6xlite: " Gary Bisson
2016-11-01 17:10 ` [PATCH v2 5/5] ARM: dts: imx6qdl-nitrogen6_max: " Gary Bisson
2016-11-02 7:40 ` [PATCH v2 0/5] ARM: dts: imx: update Boundary Devices boards support Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161025211955.5345-1-gary.bisson@boundarydevices.com \
--to=gary.bisson@boundarydevices.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@freescale.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).