[PATCH v4 0/3] mtd: s3c2410: add device tree support

[PATCH v4 0/3] mtd: s3c2410: add device tree support

[Sergio Prado]

This series adds support for configuring Samsung's s3c2410 and
compatible flash memory controller via devicetree.

Tested on FriendlyARM mini2440, based on s3c2440 SoC.

Patch 3 depends on patch 1.

Changes since v3:
- apply the timings in the end of ->setup_data_interface so the
  timings can be changed at runtime by the MTD core.

Changes since v2:
- conditionally assign chip->setup_data_interface to
  s3c2410_nand_setup_data_interface if booting via device tree

Changes since v1:
- automate timing selection when booting with a device tree
- make s3c24XX_nand_devtype_data structs "static const"
- removing samsung,s3c6400-nand compatible since it is equivalent to
  samsung,s3c2412-nand

Changes since initial version:
- patch converted to a patch series
- read timings from nand_sdr_timings when booting with a device tree
- naming improvements in the device tree binding
  (s/nand/nand-controller/, s/_/-, s/children/child)
- dropped property samsung,ignore_unset_ecc
- remove @0 from nand device node
- checking pdev->dev.of_node instead of using ifdef CONFIG_OF_MTD
- preventing from parsing device tree properties twice
- increment the nand controller child node refcount, since we
  maintain a reference to it and its name field
- using of_device_get_match_data() instead of of_match_device()
  to make the code simpler
- remove CONFIG_MTD_NAND_S3C2410_HWECC compile option so we can
  select ECC mode using nand-ecc-mode property in the device tree

Sergio Prado (3):
  mtd: s3c2410: make ecc mode configurable via platform data
  dt-bindings: mtd: add DT binding for s3c2410 flash controller
  mtd: s3c2410: parse the device configuration from OF node

 .../devicetree/bindings/mtd/samsung-s3c2410.txt    |  56 +++++
 arch/arm/mach-s3c24xx/common-smdk.c                |   1 +
 arch/arm/mach-s3c24xx/mach-anubis.c                |   1 +
 arch/arm/mach-s3c24xx/mach-at2440evb.c             |   1 +
 arch/arm/mach-s3c24xx/mach-bast.c                  |   1 +
 arch/arm/mach-s3c24xx/mach-gta02.c                 |   1 +
 arch/arm/mach-s3c24xx/mach-jive.c                  |   1 +
 arch/arm/mach-s3c24xx/mach-mini2440.c              |   1 +
 arch/arm/mach-s3c24xx/mach-osiris.c                |   1 +
 arch/arm/mach-s3c24xx/mach-qt2410.c                |   1 +
 arch/arm/mach-s3c24xx/mach-rx1950.c                |   1 +
 arch/arm/mach-s3c24xx/mach-rx3715.c                |   1 +
 arch/arm/mach-s3c24xx/mach-vstms.c                 |   1 +
 arch/arm/mach-s3c64xx/mach-hmt.c                   |   1 +
 arch/arm/mach-s3c64xx/mach-mini6410.c              |   1 +
 arch/arm/mach-s3c64xx/mach-real6410.c              |   1 +
 drivers/mtd/nand/Kconfig                           |   9 -
 drivers/mtd/nand/s3c2410.c                         | 277 +++++++++++++++------
 include/linux/platform_data/mtd-nand-s3c2410.h     |   7 +-
 19 files changed, 278 insertions(+), 86 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt

-- 
1.9.1

[PATCH v4 1/3] mtd: s3c2410: make ecc mode configurable via platform data

[Sergio Prado]

Removing CONFIG_MTD_NAND_S3C2410_HWECC option and adding a ecc_mode
field in the drivers's platform data structure so it can be selectable
via platform data.

Also setting this field to NAND_ECC_SOFT in all boards using this
driver since none of them had CONFIG_MTD_NAND_S3C2410_HWECC enabled.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
---
 arch/arm/mach-s3c24xx/common-smdk.c            |   1 +
 arch/arm/mach-s3c24xx/mach-anubis.c            |   1 +
 arch/arm/mach-s3c24xx/mach-at2440evb.c         |   1 +
 arch/arm/mach-s3c24xx/mach-bast.c              |   1 +
 arch/arm/mach-s3c24xx/mach-gta02.c             |   1 +
 arch/arm/mach-s3c24xx/mach-jive.c              |   1 +
 arch/arm/mach-s3c24xx/mach-mini2440.c          |   1 +
 arch/arm/mach-s3c24xx/mach-osiris.c            |   1 +
 arch/arm/mach-s3c24xx/mach-qt2410.c            |   1 +
 arch/arm/mach-s3c24xx/mach-rx1950.c            |   1 +
 arch/arm/mach-s3c24xx/mach-rx3715.c            |   1 +
 arch/arm/mach-s3c24xx/mach-vstms.c             |   1 +
 arch/arm/mach-s3c64xx/mach-hmt.c               |   1 +
 arch/arm/mach-s3c64xx/mach-mini6410.c          |   1 +
 arch/arm/mach-s3c64xx/mach-real6410.c          |   1 +
 drivers/mtd/nand/Kconfig                       |   9 --
 drivers/mtd/nand/s3c2410.c                     | 119 +++++++++++++------------
 include/linux/platform_data/mtd-nand-s3c2410.h |   6 +-
 18 files changed, 79 insertions(+), 70 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index e9fbcc91c5c0..9e0bc46e90ec 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -171,6 +171,7 @@
 	.twrph1		= 20,
 	.nr_sets	= ARRAY_SIZE(smdk_nand_sets),
 	.sets		= smdk_nand_sets,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 /* devices we initialise */
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index d03df0df01fa..029ef1b58925 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -223,6 +223,7 @@ static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
 	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
 	.sets		= anubis_nand_sets,
 	.select_chip	= anubis_nand_select,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 /* IDE channels */
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 9ae170fef2a7..7b28eb623fc1 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -114,6 +114,7 @@
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(at2440evb_nand_sets),
 	.sets		= at2440evb_nand_sets,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 /* DM9000AEP 10/100 ethernet controller */
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index ed07cf392d4b..5185036765db 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -299,6 +299,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
 	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
 	.sets		= bast_nand_sets,
 	.select_chip	= bast_nand_select,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 /* DM9000 */
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 27ae6877550f..b0ed401da3a3 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -443,6 +443,7 @@ static void gta02_udc_vbus_draw(unsigned int ma)
 	.twrph1		= 15,
 	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
 	.sets		= gta02_nand_sets,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 7d99fe8f6157..895aca225952 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -232,6 +232,7 @@
 	.twrph1		= 40,
 	.sets		= jive_nand_sets,
 	.nr_sets	= ARRAY_SIZE(jive_nand_sets),
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 static int __init jive_mtdset(char *options)
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index ec60bd4a1646..71af8d2fd320 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -287,6 +287,7 @@
 	.nr_sets	= ARRAY_SIZE(mini2440_nand_sets),
 	.sets		= mini2440_nand_sets,
 	.ignore_unset_ecc = 1,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 /* DM9000AEP 10/100 ethernet controller */
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 2f6fdc326835..70b0eb7d3134 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -238,6 +238,7 @@ static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
 	.nr_sets	= ARRAY_SIZE(osiris_nand_sets),
 	.sets		= osiris_nand_sets,
 	.select_chip	= osiris_nand_select,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 /* PCMCIA control and configuration */
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 984516e8307a..868c82087403 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -284,6 +284,7 @@
 	.twrph1		= 20,
 	.nr_sets	= ARRAY_SIZE(qt2410_nand_sets),
 	.sets		= qt2410_nand_sets,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 /* UDC */
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 25a139bb9826..e86ad6a68a0b 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -611,6 +611,7 @@ static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
 	.twrph1 = 15,
 	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
 	.sets = rx1950_nand_sets,
+	.ecc_mode = NAND_ECC_SOFT,
 };
 
 static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index cf55196f89ca..a39fb9780dd3 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -164,6 +164,7 @@
 	.twrph1		= 15,
 	.nr_sets	= ARRAY_SIZE(rx3715_nand_sets),
 	.sets		= rx3715_nand_sets,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 static struct platform_device *rx3715_devices[] __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index b4460d5f7011..f5e6322145fa 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -117,6 +117,7 @@
 	.twrph1		= 20,
 	.nr_sets	= ARRAY_SIZE(vstms_nand_sets),
 	.sets		= vstms_nand_sets,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 static struct platform_device *vstms_devices[] __initdata = {
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index bc7dc1fcbf7d..59b5531f1987 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -204,6 +204,7 @@ static void hmt_bl_exit(struct device *dev)
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
 	.sets		= hmt_nand_sets,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 static struct gpio_led hmt_leds[] = {
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index ae999fb3fe6d..a3e3e25728b4 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -142,6 +142,7 @@
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(mini6410_nand_sets),
 	.sets		= mini6410_nand_sets,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 4e240ffa7ac7..d6b3ffd7704b 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -194,6 +194,7 @@
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(real6410_nand_sets),
 	.sets		= real6410_nand_sets,
+	.ecc_mode       = NAND_ECC_SOFT,
 };
 
 static struct platform_device *real6410_devices[] __initdata = {
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7b7a887b4709..9748f3580d4b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -179,15 +179,6 @@ config MTD_NAND_S3C2410_DEBUG
 	help
 	  Enable debugging of the S3C NAND driver
 
-config MTD_NAND_S3C2410_HWECC
-	bool "Samsung S3C NAND Hardware ECC"
-	depends on MTD_NAND_S3C2410
-	help
-	  Enable the use of the controller's internal ECC generator when
-	  using NAND. Early versions of the chips have had problems with
-	  incorrect ECC generation, and if using these, the default of
-	  software ECC is preferable.
-
 config MTD_NAND_NDFC
 	tristate "NDFC NanD Flash Controller"
 	depends on 4xx
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index d459c19d78de..371db0d48135 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -497,7 +497,6 @@ static int s3c2412_nand_devready(struct mtd_info *mtd)
 
 /* ECC handling functions */
 
-#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
 static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 				     u_char *read_ecc, u_char *calc_ecc)
 {
@@ -649,7 +648,6 @@ static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 
 	return 0;
 }
-#endif
 
 /* over-ride the standard functions for a little more speed. We can
  * use read/write block to move the data buffers to/from the controller
@@ -858,50 +856,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 	nmtd->info	   = info;
 	nmtd->set	   = set;
 
-#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
-	chip->ecc.calculate = s3c2410_nand_calculate_ecc;
-	chip->ecc.correct   = s3c2410_nand_correct_data;
-	chip->ecc.mode	    = NAND_ECC_HW;
-	chip->ecc.strength  = 1;
-
-	switch (info->cpu_type) {
-	case TYPE_S3C2410:
-		chip->ecc.hwctl	    = s3c2410_nand_enable_hwecc;
-		chip->ecc.calculate = s3c2410_nand_calculate_ecc;
-		break;
-
-	case TYPE_S3C2412:
-		chip->ecc.hwctl     = s3c2412_nand_enable_hwecc;
-		chip->ecc.calculate = s3c2412_nand_calculate_ecc;
-		break;
-
-	case TYPE_S3C2440:
-		chip->ecc.hwctl     = s3c2440_nand_enable_hwecc;
-		chip->ecc.calculate = s3c2440_nand_calculate_ecc;
-		break;
-	}
-#else
-	chip->ecc.mode	    = NAND_ECC_SOFT;
-	chip->ecc.algo	= NAND_ECC_HAMMING;
-#endif
-
-	if (set->disable_ecc)
-		chip->ecc.mode	= NAND_ECC_NONE;
-
-	switch (chip->ecc.mode) {
-	case NAND_ECC_NONE:
-		dev_info(info->device, "NAND ECC disabled\n");
-		break;
-	case NAND_ECC_SOFT:
-		dev_info(info->device, "NAND soft ECC\n");
-		break;
-	case NAND_ECC_HW:
-		dev_info(info->device, "NAND hardware ECC\n");
-		break;
-	default:
-		dev_info(info->device, "NAND ECC UNKNOWN\n");
-		break;
-	}
+	chip->ecc.mode = info->platform->ecc_mode;
 
 	/* If you use u-boot BBT creation code, specifying this flag will
 	 * let the kernel fish out the BBT from the NAND, and also skip the
@@ -923,28 +878,72 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
  *
  * The internal state is currently limited to the ECC state information.
 */
-static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
+static int s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 				     struct s3c2410_nand_mtd *nmtd)
 {
 	struct nand_chip *chip = &nmtd->chip;
 
-	dev_dbg(info->device, "chip %p => page shift %d\n",
-		chip, chip->page_shift);
+	switch (chip->ecc.mode) {
 
-	if (chip->ecc.mode != NAND_ECC_HW)
-		return;
+	case NAND_ECC_NONE:
+		dev_info(info->device, "ECC disabled\n");
+		break;
+
+	case NAND_ECC_SOFT:
+		/*
+		 * This driver expects Hamming based ECC when ecc_mode is set
+		 * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to
+		 * avoid adding an extra ecc_algo field to s3c2410_platform_nand.
+		 */
+		chip->ecc.algo = NAND_ECC_HAMMING;
+		dev_info(info->device, "soft ECC\n");
+		break;
+
+	case NAND_ECC_HW:
+		chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+		chip->ecc.correct   = s3c2410_nand_correct_data;
+		chip->ecc.strength  = 1;
+
+		switch (info->cpu_type) {
+		case TYPE_S3C2410:
+			chip->ecc.hwctl	    = s3c2410_nand_enable_hwecc;
+			chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+			break;
+
+		case TYPE_S3C2412:
+			chip->ecc.hwctl     = s3c2412_nand_enable_hwecc;
+			chip->ecc.calculate = s3c2412_nand_calculate_ecc;
+			break;
+
+		case TYPE_S3C2440:
+			chip->ecc.hwctl     = s3c2440_nand_enable_hwecc;
+			chip->ecc.calculate = s3c2440_nand_calculate_ecc;
+			break;
+		}
+
+		dev_dbg(info->device, "chip %p => page shift %d\n",
+			chip, chip->page_shift);
 
 		/* change the behaviour depending on whether we are using
 		 * the large or small page nand device */
+		if (chip->page_shift > 10) {
+			chip->ecc.size	    = 256;
+			chip->ecc.bytes	    = 3;
+		} else {
+			chip->ecc.size	    = 512;
+			chip->ecc.bytes	    = 3;
+			mtd_set_ooblayout(nand_to_mtd(chip), &s3c2410_ooblayout_ops);
+		}
 
-	if (chip->page_shift > 10) {
-		chip->ecc.size	    = 256;
-		chip->ecc.bytes	    = 3;
-	} else {
-		chip->ecc.size	    = 512;
-		chip->ecc.bytes	    = 3;
-		mtd_set_ooblayout(nand_to_mtd(chip), &s3c2410_ooblayout_ops);
+		dev_info(info->device, "hardware ECC\n");
+		break;
+
+	default:
+		dev_err(info->device, "invalid ECC mode!\n");
+		return -EINVAL;
 	}
+
+	return 0;
 }
 
 /* s3c24xx_nand_probe
@@ -1046,7 +1045,9 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 						 NULL);
 
 		if (nmtd->scan_res == 0) {
-			s3c2410_nand_update_chip(info, nmtd);
+			err = s3c2410_nand_update_chip(info, nmtd);
+			if (err < 0)
+				goto exit_error;
 			nand_scan_tail(mtd);
 			s3c2410_nand_add_partition(info, nmtd, sets);
 		}
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
index c55e42ee57fa..729af13d1773 100644
--- a/include/linux/platform_data/mtd-nand-s3c2410.h
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -12,9 +12,10 @@
 #ifndef __MTD_NAND_S3C2410_H
 #define __MTD_NAND_S3C2410_H
 
+#include <linux/mtd/nand.h>
+
 /**
  * struct s3c2410_nand_set - define a set of one or more nand chips
- * @disable_ecc:	Entirely disable ECC - Dangerous
  * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
  *			Setting this flag will allow the kernel to
  *			look for it at boot time and also skip the NAND
@@ -31,7 +32,6 @@
  * a warning at boot time.
  */
 struct s3c2410_nand_set {
-	unsigned int		disable_ecc:1;
 	unsigned int		flash_bbt:1;
 
 	unsigned int		options;
@@ -51,6 +51,8 @@ struct s3c2410_platform_nand {
 
 	unsigned int	ignore_unset_ecc:1;
 
+	nand_ecc_modes_t	ecc_mode;
+
 	int			nr_sets;
 	struct s3c2410_nand_set *sets;
 
-- 
1.9.1

[PATCH v4 2/3] dt-bindings: mtd: add DT binding for s3c2410 flash controller

[Sergio Prado]

Adds the device tree bindings description for Samsung S3C2410 and
compatible NAND flash controller.

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Acked-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Sergio Prado <sergio.prado-1e4yhPs3/ABSwrhanM7KvQ@public.gmane.org>
---
 .../devicetree/bindings/mtd/samsung-s3c2410.txt    | 56 ++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt

diff --git a/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt b/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt
new file mode 100644
index 000000000000..0040eb8895e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt
@@ -0,0 +1,56 @@
+* Samsung S3C2410 and compatible NAND flash controller
+
+Required properties:
+- compatible : The possible values are:
+	"samsung,s3c2410-nand"
+	"samsung,s3c2412-nand"
+	"samsung,s3c2440-nand"
+- reg : register's location and length.
+- #address-cells, #size-cells : see nand.txt
+- clocks : phandle to the nand controller clock
+- clock-names : must contain "nand"
+
+Optional child nodes:
+Child nodes representing the available nand chips.
+
+Optional child properties:
+- nand-ecc-mode : see nand.txt
+- nand-on-flash-bbt : see nand.txt
+
+Each child device node may optionally contain a 'partitions' sub-node,
+which further contains sub-nodes describing the flash partition mapping.
+See partition.txt for more detail.
+
+Example:
+
+nand-controller@4e000000 {
+	compatible = "samsung,s3c2440-nand";
+	reg = <0x4e000000 0x40>;
+
+	#address-cells = <1>;
+        #size-cells = <0>;
+
+	clocks = <&clocks HCLK_NAND>;
+	clock-names = "nand";
+
+	nand {
+		nand-ecc-mode = "soft";
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0x040000>;
+			};
+
+			partition@40000 {
+				label = "kernel";
+				reg = <0x040000 0x500000>;
+			};
+		};
+	};
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] mtd: s3c2410: parse the device configuration from OF node

[Sergio Prado]

Allows configuring Samsung's s3c2410 memory controller using a
devicetree.

Signed-off-by: Sergio Prado <sergio.prado-1e4yhPs3/ABSwrhanM7KvQ@public.gmane.org>
---
 drivers/mtd/nand/s3c2410.c                     | 158 ++++++++++++++++++++++---
 include/linux/platform_data/mtd-nand-s3c2410.h |   1 +
 2 files changed, 143 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 371db0d48135..b13208c526f8 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -39,6 +39,8 @@
 #include <linux/slab.h>
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -185,6 +187,22 @@ struct s3c2410_nand_info {
 #endif
 };
 
+struct s3c24XX_nand_devtype_data {
+	enum s3c_cpu_type type;
+};
+
+static const struct s3c24XX_nand_devtype_data s3c2410_nand_devtype_data = {
+	.type = TYPE_S3C2410,
+};
+
+static const struct s3c24XX_nand_devtype_data s3c2412_nand_devtype_data = {
+	.type = TYPE_S3C2412,
+};
+
+static const struct s3c24XX_nand_devtype_data s3c2440_nand_devtype_data = {
+	.type = TYPE_S3C2440,
+};
+
 /* conversion functions */
 
 static struct s3c2410_nand_mtd *s3c2410_nand_mtd_toours(struct mtd_info *mtd)
@@ -794,6 +812,30 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
 	return -ENODEV;
 }
 
+static int s3c2410_nand_setup_data_interface(struct mtd_info *mtd,
+					     const struct nand_data_interface *conf,
+					     bool check_only)
+{
+	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+	struct s3c2410_platform_nand *pdata = info->platform;
+	const struct nand_sdr_timings *timings;
+	int tacls;
+
+	timings = nand_get_sdr_timings(conf);
+	if (IS_ERR(timings))
+		return -ENOTSUPP;
+
+	tacls = timings->tCLS_min - timings->tWP_min;
+	if (tacls < 0)
+		tacls = 0;
+
+	pdata->tacls  = DIV_ROUND_UP(tacls, 1000);
+	pdata->twrph0 = DIV_ROUND_UP(timings->tWP_min, 1000);
+	pdata->twrph1 = DIV_ROUND_UP(timings->tCLH_min, 1000);
+
+	return s3c2410_nand_setrate(info);
+}
+
 /**
  * s3c2410_nand_init_chip - initialise a single instance of an chip
  * @info: The base NAND controller the chip is on.
@@ -808,9 +850,12 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 				   struct s3c2410_nand_mtd *nmtd,
 				   struct s3c2410_nand_set *set)
 {
+	struct device_node *np = info->device->of_node;
 	struct nand_chip *chip = &nmtd->chip;
 	void __iomem *regs = info->regs;
 
+	nand_set_flash_node(chip, set->of_node);
+
 	chip->write_buf    = s3c2410_nand_write_buf;
 	chip->read_buf     = s3c2410_nand_read_buf;
 	chip->select_chip  = s3c2410_nand_select_chip;
@@ -819,6 +864,13 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 	chip->options	   = set->options;
 	chip->controller   = &info->controller;
 
+	/*
+	 * let's keep behavior unchanged for legacy boards booting via pdata and
+	 * auto-detect timings only when booting with a device tree.
+	 */
+	if (np)
+		chip->setup_data_interface = s3c2410_nand_setup_data_interface;
+
 	switch (info->cpu_type) {
 	case TYPE_S3C2410:
 		chip->IO_ADDR_W = regs + S3C2410_NFDATA;
@@ -859,12 +911,9 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 	chip->ecc.mode = info->platform->ecc_mode;
 
 	/* If you use u-boot BBT creation code, specifying this flag will
-	 * let the kernel fish out the BBT from the NAND, and also skip the
-	 * full NAND scan that can take 1/2s or so. Little things... */
-	if (set->flash_bbt) {
+	 * let the kernel fish out the BBT from the NAND */
+	if (set->flash_bbt)
 		chip->bbt_options |= NAND_BBT_USE_FLASH;
-		chip->options |= NAND_SKIP_BBTSCAN;
-	}
 }
 
 /**
@@ -943,6 +992,77 @@ static int s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 		return -EINVAL;
 	}
 
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
+		chip->options |= NAND_SKIP_BBTSCAN;
+
+	return 0;
+}
+
+static const struct of_device_id s3c24xx_nand_dt_ids[] = {
+	{
+		.compatible = "samsung,s3c2410-nand",
+		.data = &s3c2410_nand_devtype_data,
+	}, {
+		.compatible = "samsung,s3c2412-nand", /* also compatible with s3c6400 */
+		.data = &s3c2412_nand_devtype_data,
+	}, {
+		.compatible = "samsung,s3c2440-nand",
+		.data = &s3c2440_nand_devtype_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_nand_dt_ids);
+
+static int s3c24xx_nand_probe_dt(struct platform_device *pdev)
+{
+	const struct s3c24XX_nand_devtype_data *devtype_data;
+	struct s3c2410_platform_nand *pdata;
+	struct s3c2410_nand_info *info = platform_get_drvdata(pdev);
+	struct device_node *np = pdev->dev.of_node, *child;
+	struct s3c2410_nand_set *sets;
+
+	devtype_data = of_device_get_match_data(&pdev->dev);
+	if (!devtype_data)
+		return -ENODEV;
+
+	info->cpu_type = devtype_data->type;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdev->dev.platform_data = pdata;
+
+	pdata->nr_sets = of_get_child_count(np);
+	if (!pdata->nr_sets)
+		return 0;
+
+	sets = devm_kzalloc(&pdev->dev, sizeof(*sets) * pdata->nr_sets, GFP_KERNEL);
+	if (!sets)
+		return -ENOMEM;
+
+	pdata->sets = sets;
+
+	for_each_available_child_of_node(np, child) {
+
+		sets->name = (char *)child->name;
+		sets->of_node = child;
+		sets->nr_chips = 1;
+
+		of_node_get(child);
+
+		sets++;
+	}
+
+	return 0;
+}
+
+static int s3c24xx_nand_probe_pdata(struct platform_device *pdev)
+{
+	struct s3c2410_nand_info *info = platform_get_drvdata(pdev);
+
+	info->cpu_type = platform_get_device_id(pdev)->driver_data;
+
 	return 0;
 }
 
@@ -955,8 +1075,7 @@ static int s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 */
 static int s3c24xx_nand_probe(struct platform_device *pdev)
 {
-	struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
-	enum s3c_cpu_type cpu_type;
+	struct s3c2410_platform_nand *plat;
 	struct s3c2410_nand_info *info;
 	struct s3c2410_nand_mtd *nmtd;
 	struct s3c2410_nand_set *sets;
@@ -966,8 +1085,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 	int nr_sets;
 	int setno;
 
-	cpu_type = platform_get_device_id(pdev)->driver_data;
-
 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (info == NULL) {
 		err = -ENOMEM;
@@ -989,6 +1106,16 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 
 	s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
 
+	if (pdev->dev.of_node)
+		err = s3c24xx_nand_probe_dt(pdev);
+	else
+		err = s3c24xx_nand_probe_pdata(pdev);
+
+	if (err)
+		goto exit_error;
+
+	plat = to_nand_plat(pdev);
+
 	/* allocate and map the resource */
 
 	/* currently we assume we have the one resource */
@@ -997,7 +1124,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 
 	info->device	= &pdev->dev;
 	info->platform	= plat;
-	info->cpu_type	= cpu_type;
 
 	info->regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(info->regs)) {
@@ -1007,12 +1133,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "mapped registers at %p\n", info->regs);
 
-	/* initialise the hardware */
-
-	err = s3c2410_nand_inithw(info);
-	if (err != 0)
-		goto exit_error;
-
 	sets = (plat != NULL) ? plat->sets : NULL;
 	nr_sets = (plat != NULL) ? plat->nr_sets : 1;
 
@@ -1056,6 +1176,11 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
 			sets++;
 	}
 
+	/* initialise the hardware */
+	err = s3c2410_nand_inithw(info);
+	if (err != 0)
+		goto exit_error;
+
 	err = s3c2410_nand_cpufreq_register(info);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to init cpufreq support\n");
@@ -1156,6 +1281,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
 	.id_table	= s3c24xx_driver_ids,
 	.driver		= {
 		.name	= "s3c24xx-nand",
+		.of_match_table = s3c24xx_nand_dt_ids,
 	},
 };
 
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
index 729af13d1773..f01659026b26 100644
--- a/include/linux/platform_data/mtd-nand-s3c2410.h
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -40,6 +40,7 @@ struct s3c2410_nand_set {
 	char			*name;
 	int			*nr_map;
 	struct mtd_partition	*partitions;
+	struct device_node	*of_node;
 };
 
 struct s3c2410_platform_nand {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 0/3] mtd: s3c2410: add device tree support

[Boris Brezillon]

On Wed, 26 Oct 2016 21:59:52 -0200
Sergio Prado <sergio.prado@e-labworks.com> wrote:

> This series adds support for configuring Samsung's s3c2410 and
> compatible flash memory controller via devicetree.
> 
> Tested on FriendlyARM mini2440, based on s3c2440 SoC.
> 
> Patch 3 depends on patch 1.

Applied.

Thanks,

Boris

> 
> Changes since v3:
> - apply the timings in the end of ->setup_data_interface so the
>   timings can be changed at runtime by the MTD core.
> 
> Changes since v2:
> - conditionally assign chip->setup_data_interface to
>   s3c2410_nand_setup_data_interface if booting via device tree
> 
> Changes since v1:
> - automate timing selection when booting with a device tree
> - make s3c24XX_nand_devtype_data structs "static const"
> - removing samsung,s3c6400-nand compatible since it is equivalent to
>   samsung,s3c2412-nand
> 
> Changes since initial version:
> - patch converted to a patch series
> - read timings from nand_sdr_timings when booting with a device tree
> - naming improvements in the device tree binding
>   (s/nand/nand-controller/, s/_/-, s/children/child)
> - dropped property samsung,ignore_unset_ecc
> - remove @0 from nand device node
> - checking pdev->dev.of_node instead of using ifdef CONFIG_OF_MTD
> - preventing from parsing device tree properties twice
> - increment the nand controller child node refcount, since we
>   maintain a reference to it and its name field
> - using of_device_get_match_data() instead of of_match_device()
>   to make the code simpler
> - remove CONFIG_MTD_NAND_S3C2410_HWECC compile option so we can
>   select ECC mode using nand-ecc-mode property in the device tree
> 
> Sergio Prado (3):
>   mtd: s3c2410: make ecc mode configurable via platform data
>   dt-bindings: mtd: add DT binding for s3c2410 flash controller
>   mtd: s3c2410: parse the device configuration from OF node
> 
>  .../devicetree/bindings/mtd/samsung-s3c2410.txt    |  56 +++++
>  arch/arm/mach-s3c24xx/common-smdk.c                |   1 +
>  arch/arm/mach-s3c24xx/mach-anubis.c                |   1 +
>  arch/arm/mach-s3c24xx/mach-at2440evb.c             |   1 +
>  arch/arm/mach-s3c24xx/mach-bast.c                  |   1 +
>  arch/arm/mach-s3c24xx/mach-gta02.c                 |   1 +
>  arch/arm/mach-s3c24xx/mach-jive.c                  |   1 +
>  arch/arm/mach-s3c24xx/mach-mini2440.c              |   1 +
>  arch/arm/mach-s3c24xx/mach-osiris.c                |   1 +
>  arch/arm/mach-s3c24xx/mach-qt2410.c                |   1 +
>  arch/arm/mach-s3c24xx/mach-rx1950.c                |   1 +
>  arch/arm/mach-s3c24xx/mach-rx3715.c                |   1 +
>  arch/arm/mach-s3c24xx/mach-vstms.c                 |   1 +
>  arch/arm/mach-s3c64xx/mach-hmt.c                   |   1 +
>  arch/arm/mach-s3c64xx/mach-mini6410.c              |   1 +
>  arch/arm/mach-s3c64xx/mach-real6410.c              |   1 +
>  drivers/mtd/nand/Kconfig                           |   9 -
>  drivers/mtd/nand/s3c2410.c                         | 277 +++++++++++++++------
>  include/linux/platform_data/mtd-nand-s3c2410.h     |   7 +-
>  19 files changed, 278 insertions(+), 86 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt
>