From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH V2] pinctrl: qcom: Add msm8994 pinctrl driver Date: Sun, 30 Oct 2016 23:40:48 -0500 Message-ID: <20161031044048.avyndpys2aggrjb4@rob-hp-laptop> References: <20161026233228.15219-1-michael.scott@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Return-path: Content-Disposition: inline In-Reply-To: <20161026233228.15219-1-michael.scott@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Michael Scott Cc: linux-gpio@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Linus Walleij , Mark Rutland , Andy Gross , David Brown , Bjorn Andersson , Joonwoo Park , Jeremy McNicoll List-Id: devicetree@vger.kernel.org On Wed, Oct 26, 2016 at 04:32:28PM -0700, Michael Scott wrote: > Initial pinctrl driver for QCOM msm8994 platforms. > > In order to continue the initial board support for QCOM msm8994/msm8992 > presented in patches from Jeremy McNicoll , let's put > a proper pinctrl driver in place. > > Currently, the DT for these platforms uses the msm8x74 pinctrl driver to enable > basic UART. Beyond the first few pins the rest are different enough to justify > it's own driver. > > Note: This driver is also be used by QCOM's msm8992 platform as it's TLM block > is the same. > > - Initial formatting and style was taken from the msm8x74 pinctrl driver added > by Björn Andersson > - Data was then adjusted per QCOM MSM8994 documentation for Top Level Multiplexing > - Bindings documentation was based on qcom,msm8996-pinctrl.txt by > Joonwoo Park and then modified for msm8994 content > > Signed-off-by: Michael Scott > --- > > V1 -> V2: fixed missing FUNCTION(nav_pps) and removed 3 odd newlines between blsp_i2c4_groups and cci_timer0_groups > > .../bindings/pinctrl/qcom,msm8994-pinctrl.txt | 175 +++ Acked-by: Rob Herring > drivers/pinctrl/qcom/Kconfig | 9 + > drivers/pinctrl/qcom/Makefile | 1 + > drivers/pinctrl/qcom/pinctrl-msm8994.c | 1400 ++++++++++++++++++++ > 4 files changed, 1585 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt > create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8994.c