From: Daniel Lezcano <daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Noam Camus <noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v2 2/3] clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer
Date: Mon, 31 Oct 2016 11:28:14 +0100 [thread overview]
Message-ID: <20161031102814.GC1506@mai> (raw)
In-Reply-To: <1477224748-25223-3-git-send-email-noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
On Sun, Oct 23, 2016 at 03:12:27PM +0300, Noam Camus wrote:
> From: Noam Camus <noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
>
> nps_setup_clocksource() should take node as only argument i.e.:
> replace
> int __init nps_setup_clocksource(struct device_node *node, struct clk *clk)
> with
> int __init nps_setup_clocksource(struct device_node *node)
>
> This is also serve as preperation for next patch which adds support
s/preperation/preparation/
> for clockevents to nps400.
> Specifically we add new function nps_get_timer_clk() to serve clocksource
> and later clockevent registration.
> Signed-off-by: Noam Camus <noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
> ---
> drivers/clocksource/timer-nps.c | 49 ++++++++++++++++++++------------------
> 1 files changed, 26 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
> index 70c149a..6156e54 100644
> --- a/drivers/clocksource/timer-nps.c
> +++ b/drivers/clocksource/timer-nps.c
> @@ -47,6 +47,28 @@
> static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
>
> static unsigned long nps_timer_rate;
> +static int nps_get_timer_clk(struct device_node *node,
> + unsigned long *timer_freq,
> + struct clk *clk)
This function prototype does not make sense. A pointer to a clock is passed
for nothing here.
> +{
> + int ret;
> +
> + clk = of_clk_get(node, 0);
> + if (IS_ERR(clk)) {
> + pr_err("timer missing clk");
> + return PTR_ERR(clk);
> + }
> +
> + ret = clk_prepare_enable(clk);
> + if (ret) {
> + pr_err("Couldn't enable parent clk\n");
> + return ret;
> + }
> +
> + *timer_freq = clk_get_rate(clk);
> +
timer_freq check.
rollback on error.
> + return 0;
> +}
>
> static cycle_t nps_clksrc_read(struct clocksource *clksrc)
> {
> @@ -55,23 +77,17 @@ static cycle_t nps_clksrc_read(struct clocksource *clksrc)
> return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
> }
>
> -static int __init nps_setup_clocksource(struct device_node *node,
> - struct clk *clk)
> +static int __init nps_setup_clocksource(struct device_node *node)
> {
> int ret, cluster;
> + struct clk *clk;
>
> for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
> nps_msu_reg_low_addr[cluster] =
> nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
> NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
>
> - ret = clk_prepare_enable(clk);
> - if (ret) {
> - pr_err("Couldn't enable parent clock\n");
> - return ret;
> - }
> -
> - nps_timer_rate = clk_get_rate(clk);
> + nps_get_timer_clk(node, &nps_timer_rate, clk);
Return code check ?
> ret = clocksource_mmio_init(nps_msu_reg_low_addr, "EZnps-tick",
> nps_timer_rate, 301, 32, nps_clksrc_read);
> @@ -83,18 +99,5 @@ static int __init nps_setup_clocksource(struct device_node *node,
> return ret;
> }
>
> -static int __init nps_timer_init(struct device_node *node)
> -{
> - struct clk *clk;
> -
> - clk = of_clk_get(node, 0);
> - if (IS_ERR(clk)) {
> - pr_err("Can't get timer clock.\n");
> - return PTR_ERR(clk);
> - }
> -
> - return nps_setup_clocksource(node, clk);
> -}
> -
> CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
> - nps_timer_init);
> + nps_setup_clocksource);
> --
> 1.7.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-10-31 10:28 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-23 12:12 [PATCH v2 0/3] Add clockevet for timer-nps driver to NPS400 SoC Noam Camus
2016-10-23 12:12 ` [PATCH v2 1/3] soc: Support for NPS HW scheduling Noam Camus
[not found] ` <1477224748-25223-2-git-send-email-noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2016-10-31 10:26 ` Daniel Lezcano
2016-10-31 12:26 ` Noam Camus
[not found] ` <1477224748-25223-1-git-send-email-noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2016-10-23 12:12 ` [PATCH v2 2/3] clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer Noam Camus
[not found] ` <1477224748-25223-3-git-send-email-noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2016-10-31 10:28 ` Daniel Lezcano [this message]
2016-10-31 15:19 ` Noam Camus
2016-10-23 12:12 ` [PATCH v2 3/3] clocksource: Add clockevent support to NPS400 driver Noam Camus
2016-10-30 20:41 ` Rob Herring
2016-10-31 10:52 ` Daniel Lezcano
2016-10-31 17:03 ` Noam Camus
2016-10-31 17:51 ` Vineet Gupta
[not found] ` <DB6PR0501MB2518720A0F95ACBBBCB1CB27AAAE0-wTfl6qNNZ1PL+HUNrKNnF8DSnupUy6xnnBOFsp37pqbUKgpGm//BTAC/G2K4zDHf@public.gmane.org>
2016-11-01 20:01 ` Daniel Lezcano
2016-11-08 8:30 ` Noam Camus
2016-11-10 10:34 ` Daniel Lezcano
2016-11-10 13:00 ` Noam Camus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161031102814.GC1506@mai \
--to=daniel.lezcano-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=noamca-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).