devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org
Cc: linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Subject: [PATCH v7 2/3] clk: qcom: Add regmap mux-div clocks support
Date: Mon, 31 Oct 2016 16:55:25 +0200	[thread overview]
Message-ID: <20161031145526.5023-3-georgi.djakov@linaro.org> (raw)
In-Reply-To: <20161031145526.5023-1-georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Add support for hardware that can switch both parent clocks and divider
at the same time. This avoids generating intermediate frequencies from
either the old parent clock and new divider or new parent clock and
old divider combinations.

Signed-off-by: Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 drivers/clk/qcom/Makefile             |   1 +
 drivers/clk/qcom/clk-regmap-mux-div.c | 237 ++++++++++++++++++++++++++++++++++
 drivers/clk/qcom/clk-regmap-mux-div.h |  52 ++++++++
 3 files changed, 290 insertions(+)
 create mode 100644 drivers/clk/qcom/clk-regmap-mux-div.c
 create mode 100644 drivers/clk/qcom/clk-regmap-mux-div.h

diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 7d27f47f0c92..d3e142e577b0 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -9,6 +9,7 @@ clk-qcom-y += clk-rcg2.o
 clk-qcom-y += clk-branch.o
 clk-qcom-y += clk-regmap-divider.o
 clk-qcom-y += clk-regmap-mux.o
+clk-qcom-y += clk-regmap-mux-div.o
 clk-qcom-y += reset.o
 clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
 
diff --git a/drivers/clk/qcom/clk-regmap-mux-div.c b/drivers/clk/qcom/clk-regmap-mux-div.c
new file mode 100644
index 000000000000..682dbf906c89
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-mux-div.c
@@ -0,0 +1,237 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/regmap.h>
+
+#include "clk-regmap-mux-div.h"
+
+#define CMD_RCGR			0x0
+#define CMD_RCGR_UPDATE			BIT(0)
+#define CMD_RCGR_DIRTY_CFG		BIT(4)
+#define CMD_RCGR_ROOT_OFF		BIT(31)
+#define CFG_RCGR			0x4
+
+#define to_clk_regmap_mux_div(_hw) \
+	container_of(to_clk_regmap(_hw), struct clk_regmap_mux_div, clkr)
+
+int __mux_div_set_src_div(struct clk_regmap_mux_div *md, u32 src, u32 div)
+{
+	int ret, count;
+	u32 val, mask;
+	const char *name = clk_hw_get_name(&md->clkr.hw);
+
+	val = (div << md->hid_shift) | (src << md->src_shift);
+	mask = ((BIT(md->hid_width) - 1) << md->hid_shift) |
+	       ((BIT(md->src_width) - 1) << md->src_shift);
+
+	ret = regmap_update_bits(md->clkr.regmap, CFG_RCGR + md->reg_offset,
+				 mask, val);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(md->clkr.regmap, CMD_RCGR + md->reg_offset,
+				 CMD_RCGR_UPDATE, CMD_RCGR_UPDATE);
+	if (ret)
+		return ret;
+
+	/* Wait for update to take effect */
+	for (count = 500; count > 0; count--) {
+		ret = regmap_read(md->clkr.regmap, CMD_RCGR + md->reg_offset,
+				  &val);
+		if (ret)
+			return ret;
+		if (!(val & CMD_RCGR_UPDATE))
+			return 0;
+		udelay(1);
+	}
+
+	pr_err("%s: RCG did not update its configuration", name);
+	return -EBUSY;
+}
+
+static void __mux_div_get_src_div(struct clk_regmap_mux_div *md, u32 *src,
+				  u32 *div)
+{
+	u32 val, d, s;
+	const char *name = clk_hw_get_name(&md->clkr.hw);
+
+	regmap_read(md->clkr.regmap, CMD_RCGR + md->reg_offset, &val);
+
+	if (val & CMD_RCGR_DIRTY_CFG) {
+		pr_err("%s: RCG configuration is pending\n", name);
+		return;
+	}
+
+	regmap_read(md->clkr.regmap, CFG_RCGR + md->reg_offset, &val);
+	s = (val >> md->src_shift);
+	s &= BIT(md->src_width) - 1;
+	*src = s;
+
+	d = (val >> md->hid_shift);
+	d &= BIT(md->hid_width) - 1;
+	*div = d;
+}
+
+static inline bool is_better_rate(unsigned long req, unsigned long best,
+				  unsigned long new)
+{
+	return (req <= new && new < best) || (best < req && best < new);
+}
+
+static int mux_div_determine_rate(struct clk_hw *hw,
+				  struct clk_rate_request *req)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+	unsigned int i, div, max_div;
+	unsigned long actual_rate, best_rate = 0;
+	unsigned long req_rate = req->rate;
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+		struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i);
+		unsigned long parent_rate = clk_hw_get_rate(parent);
+
+		max_div = BIT(md->hid_width) - 1;
+		for (div = 1; div < max_div; div++) {
+			parent_rate = mult_frac(req_rate, div, 2);
+			parent_rate = clk_hw_round_rate(parent, parent_rate);
+			actual_rate = mult_frac(parent_rate, 2, div);
+
+			if (is_better_rate(req_rate, best_rate, actual_rate)) {
+				best_rate = actual_rate;
+				req->rate = best_rate;
+				req->best_parent_rate = parent_rate;
+				req->best_parent_hw = parent;
+			}
+
+			if (actual_rate < req_rate || best_rate <= req_rate)
+				break;
+		}
+	}
+
+	if (!best_rate)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int __mux_div_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+					 unsigned long prate, u32 src)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+	int ret;
+	u32 div, max_div, best_src = 0, best_div = 0;
+	unsigned int i;
+	unsigned long actual_rate, best_rate = 0;
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+		struct clk_hw *parent = clk_hw_get_parent_by_index(hw, i);
+		unsigned long parent_rate = clk_hw_get_rate(parent);
+
+		max_div = BIT(md->hid_width) - 1;
+		for (div = 1; div < max_div; div++) {
+			parent_rate = mult_frac(rate, div, 2);
+			parent_rate = clk_hw_round_rate(parent, parent_rate);
+			actual_rate = mult_frac(parent_rate, 2, div);
+
+			if (is_better_rate(rate, best_rate, actual_rate)) {
+				best_rate = actual_rate;
+				best_src = md->parent_map[i].cfg;
+				best_div = div - 1;
+			}
+
+			if (actual_rate < rate || best_rate <= rate)
+				break;
+		}
+	}
+
+	ret = __mux_div_set_src_div(md, best_src, best_div);
+	if (!ret) {
+		md->div = best_div;
+		md->src = best_src;
+	}
+
+	return ret;
+}
+
+static u8 mux_div_get_parent(struct clk_hw *hw)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+	const char *name = clk_hw_get_name(hw);
+	u32 i, div, src = 0;
+
+	__mux_div_get_src_div(md, &src, &div);
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++)
+		if (src == md->parent_map[i].cfg)
+			return i;
+
+	pr_err("%s: Can't find parent with src %d\n", name, src);
+	return 0;
+}
+
+static int mux_div_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+
+	return __mux_div_set_src_div(md, md->parent_map[index].cfg, md->div);
+}
+
+static int mux_div_set_rate(struct clk_hw *hw,
+			    unsigned long rate, unsigned long prate)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+
+	return __mux_div_set_rate_and_parent(hw, rate, prate, md->src);
+}
+
+static int mux_div_set_rate_and_parent(struct clk_hw *hw,  unsigned long rate,
+				       unsigned long prate, u8 index)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+
+	return __mux_div_set_rate_and_parent(hw, rate, prate,
+					     md->parent_map[index].cfg);
+}
+
+static unsigned long mux_div_recalc_rate(struct clk_hw *hw, unsigned long prate)
+{
+	struct clk_regmap_mux_div *md = to_clk_regmap_mux_div(hw);
+	u32 div, src;
+	int i, num_parents = clk_hw_get_num_parents(hw);
+	const char *name = clk_hw_get_name(hw);
+
+	__mux_div_get_src_div(md, &src, &div);
+	for (i = 0; i < num_parents; i++)
+		if (src == md->parent_map[i].cfg) {
+			struct clk_hw *p = clk_hw_get_parent_by_index(hw, i);
+			unsigned long parent_rate = clk_hw_get_rate(p);
+
+			return mult_frac(parent_rate, 2, div + 1);
+		}
+
+	pr_err("%s: Can't find parent %d\n", name, src);
+	return 0;
+}
+
+const struct clk_ops clk_regmap_mux_div_ops = {
+	.get_parent = mux_div_get_parent,
+	.set_parent = mux_div_set_parent,
+	.set_rate = mux_div_set_rate,
+	.set_rate_and_parent = mux_div_set_rate_and_parent,
+	.determine_rate = mux_div_determine_rate,
+	.recalc_rate = mux_div_recalc_rate,
+};
diff --git a/drivers/clk/qcom/clk-regmap-mux-div.h b/drivers/clk/qcom/clk-regmap-mux-div.h
new file mode 100644
index 000000000000..3380e8f6e8a1
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-mux-div.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCOM_CLK_REGMAP_MUX_DIV_H__
+#define __QCOM_CLK_REGMAP_MUX_DIV_H__
+
+#include <linux/clk-provider.h>
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+
+/**
+ * struct mux_div_clk - combined mux/divider clock
+ * @reg_offset: offset of the mux/divider register
+ * @hid_width:	number of bits in half integer divider
+ * @hid_shift:	lowest bit of hid value field
+ * @src_width:	number of bits in source select
+ * @src_shift:	lowest bit of source select field
+ * @div:	the divider raw configuration value
+ * @src:	the mux index which will be used if the clock is enabled
+ * @parent_map:	pointer to parent_map struct
+ * @clkr:	handle between common and hardware-specific interfaces
+ * @clk_nb:	clock notifier registered for clock rate changes of the A53 PLL
+ */
+
+struct clk_regmap_mux_div {
+	u32				reg_offset;
+	u32				hid_width;
+	u32				hid_shift;
+	u32				src_width;
+	u32				src_shift;
+	u32				div;
+	u32				src;
+	const struct parent_map		*parent_map;
+	struct clk_regmap		clkr;
+	struct notifier_block		clk_nb;
+};
+
+extern const struct clk_ops clk_regmap_mux_div_ops;
+int __mux_div_set_src_div(struct clk_regmap_mux_div *md, u32 src, u32 div);
+
+#endif
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-10-31 14:55 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-31 14:55 [PATCH v7 0/3] Add support for Qualcomm A53 CPU clock Georgi Djakov
     [not found] ` <20161031145526.5023-1-georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-10-31 14:55   ` [PATCH v7 1/3] clk: qcom: Add A53 PLL support Georgi Djakov
2016-11-09 18:24     ` Rob Herring
2016-10-31 14:55   ` Georgi Djakov [this message]
2016-10-31 14:55 ` [PATCH v7 3/3] clk: qcom: Add A53 clock driver Georgi Djakov
     [not found]   ` <20161031145526.5023-4-georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-11-09 18:24     ` Rob Herring
2016-11-14 16:15       ` Georgi Djakov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161031145526.5023-3-georgi.djakov@linaro.org \
    --to=georgi.djakov-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).