devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Juri Lelli <juri.lelli@arm.com>
To: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, peterz@infradead.org,
	vincent.guittot@linaro.org, robh+dt@kernel.org,
	mark.rutland@arm.com, linux@arm.linux.org.uk,
	sudeep.holla@arm.com, lorenzo.pieralisi@arm.com,
	catalin.marinas@arm.com, will.deacon@arm.com,
	morten.rasmussen@arm.com, dietmar.eggemann@arm.com,
	broonie@kernel.org
Subject: Re: [PATCH v7 REPOST 9/9] arm64: add sysfs cpu_capacity attribute
Date: Thu, 3 Nov 2016 05:40:18 +0000	[thread overview]
Message-ID: <20161103054018.GC16920@e106622-lin> (raw)
In-Reply-To: <20161017154650.18779-10-juri.lelli@arm.com>

Hi,

small update to be in sync with Russell's comments on arm correspoding
patch.

On 17/10/16 16:46, Juri Lelli wrote:
> Add a sysfs cpu_capacity attribute with which it is possible to read and
> write (thus over-writing default values) CPUs capacity. This might be
> useful in situations where values needs changing after boot.
> 
> The new attribute shows up as:
> 
>  /sys/devices/system/cpu/cpu*/cpu_capacity
> 
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Sudeep Holla <sudeep.holla@arm.com>
> Signed-off-by: Juri Lelli <juri.lelli@arm.com>
> ---
> 
> Changes from v5:
>   - add mutex to protect cpu_scale (as pointed out by Morten off-line)

--->8---
>From 17684f3db6d74342da424997badcb3714a1a9e63 Mon Sep 17 00:00:00 2001
From: Juri Lelli <juri.lelli@arm.com>
Date: Wed, 14 Oct 2015 12:02:05 +0100
Subject: [PATCH v7.1 9/9] arm64: add sysfs cpu_capacity attribute

Add a sysfs cpu_capacity attribute with which it is possible to read and
write (thus over-writing default values) CPUs capacity. This might be
useful in situations where values needs changing after boot.

The new attribute shows up as:

 /sys/devices/system/cpu/cpu*/cpu_capacity

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
---

Changes from v5:
  - add mutex to protect cpu_scale (as pointed out by Morten off-line)

Changes from v7:
  - include files moved at top of file
  - show_cpu_capacity simplified to less lines of code
  - unnecessary cast removed in store_cpu_capacity
  - use DEVICE_ATTR_RW() instead of DEVICE_ATTR()
  - use subsys_initcall instead of late_initcall
---
 arch/arm64/kernel/topology.c | 64 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
index b75b0ba2e113..23e9e13bd2aa 100644
--- a/arch/arm64/kernel/topology.c
+++ b/arch/arm64/kernel/topology.c
@@ -20,12 +20,15 @@
 #include <linux/of.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/string.h>
 #include <linux/cpufreq.h>
 
+#include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/topology.h>
 
 static DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE;
+static DEFINE_MUTEX(cpu_scale_mutex);
 
 unsigned long arch_scale_cpu_capacity(struct sched_domain *sd, int cpu)
 {
@@ -37,6 +40,65 @@ static void set_capacity_scale(unsigned int cpu, unsigned long capacity)
 	per_cpu(cpu_scale, cpu) = capacity;
 }
 
+#ifdef CONFIG_PROC_SYSCTL
+static ssize_t cpu_capacity_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct cpu *cpu = container_of(dev, struct cpu, dev);
+
+	return sprintf(buf, "%lu\n",
+			arch_scale_cpu_capacity(NULL, cpu->dev.id));
+}
+
+static ssize_t cpu_capacity_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf,
+				  size_t count)
+{
+	struct cpu *cpu = container_of(dev, struct cpu, dev);
+	int this_cpu = cpu->dev.id, i;
+	unsigned long new_capacity;
+	ssize_t ret;
+
+	if (count) {
+		ret = kstrtoul(buf, 0, &new_capacity);
+		if (ret)
+			return ret;
+		if (new_capacity > SCHED_CAPACITY_SCALE)
+			return -EINVAL;
+
+		mutex_lock(&cpu_scale_mutex);
+		for_each_cpu(i, &cpu_topology[this_cpu].core_sibling)
+			set_capacity_scale(i, new_capacity);
+		mutex_unlock(&cpu_scale_mutex);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(cpu_capacity);
+
+static int register_cpu_capacity_sysctl(void)
+{
+	int i;
+	struct device *cpu;
+
+	for_each_possible_cpu(i) {
+		cpu = get_cpu_device(i);
+		if (!cpu) {
+			pr_err("%s: too early to get CPU%d device!\n",
+			       __func__, i);
+			continue;
+		}
+		device_create_file(cpu, &dev_attr_cpu_capacity);
+	}
+
+	return 0;
+}
+subsys_initcall(register_cpu_capacity_sysctl);
+#endif
+
 static u32 capacity_scale;
 static u32 *raw_capacity;
 static bool cap_parsing_failed;
@@ -87,6 +149,7 @@ static void normalize_cpu_capacity(void)
 		return;
 
 	pr_debug("cpu_capacity: capacity_scale=%u\n", capacity_scale);
+	mutex_lock(&cpu_scale_mutex);
 	for_each_possible_cpu(cpu) {
 		pr_debug("cpu_capacity: cpu=%d raw_capacity=%u\n",
 			 cpu, raw_capacity[cpu]);
@@ -96,6 +159,7 @@ static void normalize_cpu_capacity(void)
 		pr_debug("cpu_capacity: CPU%d cpu_capacity=%lu\n",
 			cpu, arch_scale_cpu_capacity(NULL, cpu));
 	}
+	mutex_unlock(&cpu_scale_mutex);
 }
 
 #ifdef CONFIG_CPU_FREQ
-- 
2.10.0


  reply	other threads:[~2016-11-03  5:40 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-17 15:46 [PATCH v7 REPOST 0/9] CPUs capacity information for heterogeneous systems Juri Lelli
2016-10-17 15:46 ` [PATCH v7 REPOST 1/9] Documentation: arm: define DT cpu capacity-dmips-mhz bindings Juri Lelli
2016-10-17 15:46 ` [PATCH v7 REPOST 2/9] arm: parse cpu capacity-dmips-mhz from DT Juri Lelli
2016-10-17 15:46 ` [PATCH v7 REPOST 3/9] arm, dts: add TC2 cpu capacity-dmips-mhz information Juri Lelli
2016-10-17 15:46 ` [PATCH v7 REPOST 4/9] arm64: parse cpu capacity-dmips-mhz from DT Juri Lelli
2016-10-17 15:46 ` [PATCH v7 REPOST 5/9] arm64, dts: add Juno cpu capacity-dmips-mhz information Juri Lelli
2016-10-17 15:46 ` [PATCH v7 REPOST 6/9] arm64, dts: add Juno r1 " Juri Lelli
2016-10-17 15:46 ` [PATCH v7 REPOST 7/9] arm64, dts: add Juno r2 " Juri Lelli
2016-10-17 15:46 ` [PATCH v7 REPOST 8/9] arm: add sysfs cpu_capacity attribute Juri Lelli
2016-10-30 20:45   ` Russell King - ARM Linux
     [not found]     ` <20161030204551.GM1041-l+eeeJia6m9URfEZ8mYm6t73F7V6hmMc@public.gmane.org>
2016-11-03  5:29       ` Juri Lelli
2016-11-18  8:27         ` Juri Lelli
     [not found] ` <20161017154650.18779-1-juri.lelli-5wv7dgnIgG8@public.gmane.org>
2016-10-17 15:46   ` [PATCH v7 REPOST 9/9] arm64: " Juri Lelli
2016-11-03  5:40     ` Juri Lelli [this message]
2016-10-17 16:39 ` [PATCH v7 REPOST 0/9] CPUs capacity information for heterogeneous systems Sudeep Holla
     [not found]   ` <66c7bbfd-ec3f-ff43-9a06-ae644d9ee9d9-5wv7dgnIgG8@public.gmane.org>
2016-10-17 16:46     ` Juri Lelli
2016-10-30 14:22 ` Catalin Marinas
2016-11-03  5:37   ` Juri Lelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161103054018.GC16920@e106622-lin \
    --to=juri.lelli@arm.com \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dietmar.eggemann@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=morten.rasmussen@arm.com \
    --cc=peterz@infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=sudeep.holla@arm.com \
    --cc=vincent.guittot@linaro.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).