From: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Peter Chen <peter.chen-3arQi8VN3Tc@public.gmane.org>
Cc: sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
fabio.estevam-3arQi8VN3Tc@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Bai Ping <ping.bai-3arQi8VN3Tc@public.gmane.org>,
Peng Fan <peng.fan-3arQi8VN3Tc@public.gmane.org>
Subject: Re: [PATCH 3/3] clk: imx: clk-imx6ul: add clk support for imx6ull
Date: Sat, 5 Nov 2016 17:05:07 +0800 [thread overview]
Message-ID: <20161105090506.GH5597@dragon> (raw)
In-Reply-To: <1477969343-19887-4-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
On Tue, Nov 01, 2016 at 11:02:23AM +0800, Peter Chen wrote:
> From: Bai Ping <ping.bai-3arQi8VN3Tc@public.gmane.org>
>
> imx6ull is the derived SoC from imx6ul
>
> Cc: Michael Turquette <mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> Cc: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
> Signed-off-by: Peng Fan <peng.fan-3arQi8VN3Tc@public.gmane.org>
> Signed-off-by: Bai Ping <ping.bai-3arQi8VN3Tc@public.gmane.org>
> Signed-off-by: Peter Chen <peter.chen-3arQi8VN3Tc@public.gmane.org>
> ---
> drivers/clk/imx/clk-imx6ul.c | 74 +++++++++++++++++++++++++++-----
> include/dt-bindings/clock/imx6ul-clock.h | 15 ++++++-
> 2 files changed, 77 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
> index d1d7787..ceb99a7 100644
> --- a/drivers/clk/imx/clk-imx6ul.c
> +++ b/drivers/clk/imx/clk-imx6ul.c
> @@ -64,6 +64,11 @@ static const char *perclk_sels[] = { "ipg", "osc", };
> static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
> static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
> static const char *sim_sels[] = { "sim_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
> +/* epdc_pre_sels, epdc_sels, esai_sels only exists on i.MX6ULL */
> +static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", };
> +static const char *esai_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", };
> +static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
> +
The new line is not needed. There is already one below.
>
> static struct clk *clks[IMX6UL_CLK_END];
> static struct clk_onecell_data clk_data;
<snip>
> diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h
> index fd8aee8..563fd5b 100644
> --- a/include/dt-bindings/clock/imx6ul-clock.h
> +++ b/include/dt-bindings/clock/imx6ul-clock.h
> @@ -236,6 +236,19 @@
> #define IMX6UL_CLK_PLL3_120M 223
> #define IMX6UL_CLK_KPP 224
>
> -#define IMX6UL_CLK_END 225
> +/* For i.MX6ULL */
> +#define IMX6UL_CLK_ESAI_PRED 225
> +#define IMX6UL_CLK_ESAI_PODF 226
> +#define IMX6UL_CLK_ESAI_EXTAL 227
> +#define IMX6UL_CLK_ESAI_MEM 228
> +#define IMX6UL_CLK_ESAI_IPG 229
> +#define IMX6UL_CLK_DCP_CLK 230
> +#define IMX6UL_CLK_EPDC_PRE_SEL 231
> +#define IMX6UL_CLK_EPDC_SEL 232
> +#define IMX6UL_CLK_EPDC_PODF 233
> +#define IMX6UL_CLK_EPDC_ACLK 234
> +#define IMX6UL_CLK_EPDC_PIX 235
> +#define IMX6UL_CLK_ESAI_SEL 236
Can we have these imx6ull only clocks named after IMX6ULL_xxx?
Shawn
> +#define IMX6UL_CLK_END 237
>
> #endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-11-05 9:05 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-01 3:02 [PATCH 0/3] imx: add imx6ull support Peter Chen
[not found] ` <1477969343-19887-1-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
2016-11-01 3:02 ` [PATCH 1/3] ARM: imx6u: " Peter Chen
[not found] ` <1477969343-19887-2-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
2016-11-05 8:59 ` Shawn Guo
2016-11-08 3:44 ` Peter Chen
2016-11-01 3:02 ` [PATCH 2/3] ARM: imx: mach-imx6ul: " Peter Chen
2016-11-01 10:29 ` Fabio Estevam
2016-11-01 10:44 ` Peter Chen
[not found] ` <HE1PR04MB1450456D09E01C3F308D25AB8BA10-6LN7OEpIatVC+P/YwrXEHc9NdZoXdze2vxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2016-11-01 12:23 ` Fabio Estevam
2016-11-01 3:02 ` [PATCH 3/3] clk: imx: clk-imx6ul: add clk support for imx6ull Peter Chen
[not found] ` <1477969343-19887-4-git-send-email-peter.chen-3arQi8VN3Tc@public.gmane.org>
2016-11-02 0:12 ` Stephen Boyd
[not found] ` <20161102001205.GA16026-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-02 6:45 ` Peter Chen
2016-11-05 9:05 ` Shawn Guo [this message]
2016-11-08 3:44 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161105090506.GH5597@dragon \
--to=shawnguo-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=peng.fan-3arQi8VN3Tc@public.gmane.org \
--cc=peter.chen-3arQi8VN3Tc@public.gmane.org \
--cc=ping.bai-3arQi8VN3Tc@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).