From: "Sören Brinkmann" <soren.brinkmann-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
To: Shubhrajyoti Datta
<shubhrajyoti.datta-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
Cc: linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org,
shubhrajyoti.datta-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: Re: [PATCHv2 2/2] gpio: xilinx: Add clock support
Date: Tue, 8 Nov 2016 22:27:34 -0800 [thread overview]
Message-ID: <20161109062734.GX14444@xsjsorenbubuntu> (raw)
In-Reply-To: <1478668191-26322-2-git-send-email-shubhrajyoti.datta-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
On Wed, 2016-11-09 at 10:39:51 +0530, Shubhrajyoti Datta wrote:
> Add basic clock support for xilinx gpio.
>
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
> ---
> v2 :
> no change
>
> drivers/gpio/gpio-xilinx.c | 22 ++++++++++++++++++++++
> 1 files changed, 22 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
> index 14b2a62..923cab8 100644
> --- a/drivers/gpio/gpio-xilinx.c
> +++ b/drivers/gpio/gpio-xilinx.c
> @@ -13,6 +13,7 @@
> */
>
> #include <linux/bitops.h>
> +#include <linux/clk.h>
> #include <linux/init.h>
> #include <linux/errno.h>
> #include <linux/module.h>
> @@ -45,6 +46,7 @@
> * @gpio_state: GPIO state shadow register
> * @gpio_dir: GPIO direction shadow register
> * @gpio_lock: Lock used for synchronization
> + * @clk: Clock resource for this controller
> */
> struct xgpio_instance {
> struct of_mm_gpio_chip mmchip;
> @@ -52,6 +54,7 @@ struct xgpio_instance {
> u32 gpio_state[2];
> u32 gpio_dir[2];
> spinlock_t gpio_lock[2];
> + struct clk *clk;
> };
>
> static inline int xgpio_index(struct xgpio_instance *chip, int gpio)
> @@ -282,6 +285,7 @@ static int xgpio_remove(struct platform_device *pdev)
> struct xgpio_instance *chip = platform_get_drvdata(pdev);
>
> of_mm_gpiochip_remove(&chip->mmchip);
> + clk_disable_unprepare(chip->clk);
>
> return 0;
> }
> @@ -307,6 +311,23 @@ static int xgpio_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, chip);
>
> + /* Retrieve GPIO clock */
> + chip->clk = devm_clk_get(&pdev->dev, NULL);
The driver should use the clock-name documented in the binding to do the
clock lookup.
> + if (IS_ERR(chip->clk)) {
> + if (PTR_ERR(chip->clk) == -ENOENT) {
> + dev_info(&pdev->dev, "No clocks found for clk\n");
This is pretty much just noise. The clocks property is optional. No need
to be too verbose about that. It would be quite a lot of printing if
every driver would report absent optional DT properties.
Sören
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-11-09 6:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-09 5:09 [PATCHv2 1/2] gpio: xilinx: dt-binding: Add clock node Shubhrajyoti Datta
2016-11-09 5:09 ` [PATCHv2 2/2] gpio: xilinx: Add clock support Shubhrajyoti Datta
[not found] ` <1478668191-26322-2-git-send-email-shubhrajyoti.datta-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
2016-11-09 6:27 ` Sören Brinkmann [this message]
2016-11-09 6:46 ` Shubhrajyoti Datta
2016-11-09 17:18 ` Sören Brinkmann
2016-11-10 6:08 ` Shubhrajyoti Datta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161109062734.GX14444@xsjsorenbubuntu \
--to=soren.brinkmann-gjffaj9ahvfqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
--cc=shubhrajyoti.datta-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=shubhrajyoti.datta-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox