From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: [PATCH 1/2] ARM: dts: sun5i: Add touchscreen node to reference-design-tablet.dtsi Date: Sun, 13 Nov 2016 20:22:02 +0100 Message-ID: <20161113192203.7101-1-hdegoede@redhat.com> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Maxime Ripard , Chen-Yu Tsai Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree , Hans de Goede List-Id: devicetree@vger.kernel.org Just like on sun8i all sun5i tablets use the same interrupt and power gpios for their touchscreens. I've checked all known a13 fex files and only the UTOO P66 uses a different gpio for the interrupt. Add a touchscreen node to sun5i-reference-design-tablet.dtsi, which fills in the necessary gpios to avoid duplication in the tablet dts files, just like we do in sun8i-reference-design-tablet.dtsi. This will make future patches adding touchscreen nodes to a13 tablets simpler. Signed-off-by: Hans de Goede --- arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 38 ++++++++-------------- .../boot/dts/sun5i-reference-design-tablet.dtsi | 25 ++++++++++++++ 2 files changed, 39 insertions(+), 24 deletions(-) diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index a8b0bcc..3d7ff10 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -83,22 +83,6 @@ allwinner,pins = "PG3"; }; -&i2c1 { - icn8318: touchscreen@40 { - compatible = "chipone,icn8318"; - reg = <0x40>; - interrupt-parent = <&pio>; - interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_wake_pin_p66>; - wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - touchscreen-inverted-x; - touchscreen-swapped-x-y; - }; -}; - &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_a>; @@ -121,20 +105,26 @@ allwinner,drive = ; allwinner,pull = ; }; - - ts_wake_pin_p66: ts_wake_pin@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; ®_usb0_vbus { gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ }; +&touchscreen { + compatible = "chipone,icn8318"; + reg = <0x40>; + /* The P66 uses a different EINT then the reference design */ + interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + /* The icn8318 binding expects wake-gpios instead of power-gpios */ + wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + status = "okay"; +}; + &uart1 { /* The P66 uses the uart pins as gpios */ status = "disabled"; diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 20cc940..7af488a 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -41,6 +41,7 @@ */ #include "sunxi-reference-design-tablet.dtsi" +#include #include / { @@ -84,6 +85,23 @@ }; &i2c1 { + /* + * The gsl1680 is rated at 400KHz and it will not work reliable at + * 100KHz, this has been confirmed on multiple different q8 tablets. + * All other devices on this bus are also rated for 400KHz. + */ + clock-frequency = <400000>; + + touchscreen: touchscreen { + interrupt-parent = <&pio>; + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_power_pin>; + power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + /* Tablet dts must provide reg and compatible */ + status = "disabled"; + }; + pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; @@ -125,6 +143,13 @@ allwinner,pull = ; }; + ts_power_pin: ts_power_pin { + allwinner,pins = "PB3"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { allwinner,pins = "PG1"; allwinner,function = "gpio_in"; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html