From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Subject: [PATCH v2 1/3] ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support Date: Tue, 15 Nov 2016 21:51:04 +0800 Message-ID: <20161115135106.438-2-wens@csie.org> References: <20161115135106.438-1-wens@csie.org> Return-path: In-Reply-To: <20161115135106.438-1-wens@csie.org> Sender: linux-kernel-owner@vger.kernel.org To: Maxime Ripard Cc: Chen-Yu Tsai , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org The 2 USB host ports are directly tied to the 2 USB hosts in the SoC. The 2 host pairs were already enabled, but the USB PHY wasn't. VBUS on the 2 ports are always on. Enable the USB PHY. Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board") Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index ba5bca0fe997..44377a98cc89 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -227,3 +227,8 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + +&usbphy { + /* VBUS on usb host ports are tied to DC5V and therefore always on */ + status = "okay"; +}; -- 2.10.2