From: Mathieu Poirier <mathieu.poirier-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
zhang.chunyan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
iivanov.xz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v4] arm64: dts: qcom: Add msm8916 CoreSight components
Date: Thu, 17 Nov 2016 11:59:18 -0700 [thread overview]
Message-ID: <20161117185918.GA7884@linaro.org> (raw)
In-Reply-To: <20161117153522.11630-1-georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
On Thu, Nov 17, 2016 at 05:35:22PM +0200, Georgi Djakov wrote:
> From: "Ivan T. Ivanov" <ivan.ivanov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>
> Add initial set of CoreSight components found on Qualcomm's 8x16 chipset.
Hello Georgi,
Could you add a better desccription for the SoC? To me "8x16" doesn't
say much.
With that change:
Acked-by: Mathieu Poirier <mathieu.poirier-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>
> Signed-off-by: Ivan T. Ivanov <ivan.ivanov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>
> This patch was on hold for some time, as it has a dependency on RPM clocks,
> which is now merged into clk-next.
>
> Changes since v3: (https://lkml.org/lkml/2015/5/11/134)
> * Include msm8916-coresight.dtsi into msm8916.dtsi
>
> Changes since v2: (https://lkml.org/lkml/2015/4/29/242)
> * Added "1x" to "qcom,coresight-replicator" compatible string, to match what
> devicetree bindings documentations says.
>
>
> arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi | 254 ++++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +
> 2 files changed, 256 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi b/arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi
> new file mode 100644
> index 000000000000..900f1f484a0a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi
> @@ -0,0 +1,254 @@
> +/*
> + * Copyright (c) 2013 - 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +&soc {
> +
> + tpiu@820000 {
> + compatible = "arm,coresight-tpiu", "arm,primecell";
> + reg = <0x820000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + port {
> + tpiu_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&replicator_out1>;
> + };
> + };
> + };
> +
> + funnel@821000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x821000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /*
> + * Not described input ports:
> + * 0 - connected to Resource and Power Manger CPU ETM
> + * 1 - not-connected
> + * 2 - connected to Modem CPU ETM
> + * 3 - not-connected
> + * 5 - not-connected
> + * 6 - connected trought funnel to Wireless CPU ETM
> + * 7 - connected to STM component
> + */
> + port@4 {
> + reg = <4>;
> + funnel0_in4: endpoint {
> + slave-mode;
> + remote-endpoint = <&funnel1_out>;
> + };
> + };
> + port@8 {
> + reg = <0>;
> + funnel0_out: endpoint {
> + remote-endpoint = <&etf_in>;
> + };
> + };
> + };
> + };
> +
> + replicator@824000 {
> + compatible = "qcom,coresight-replicator1x", "arm,primecell";
> + reg = <0x824000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + replicator_out0: endpoint {
> + remote-endpoint = <&etr_in>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + replicator_out1: endpoint {
> + remote-endpoint = <&tpiu_in>;
> + };
> + };
> + port@2 {
> + reg = <0>;
> + replicator_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&etf_out>;
> + };
> + };
> + };
> + };
> +
> + etf@825000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0x825000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + etf_out: endpoint {
> + slave-mode;
> + remote-endpoint = <&funnel0_out>;
> + };
> + };
> + port@1 {
> + reg = <0>;
> + etf_in: endpoint {
> + remote-endpoint = <&replicator_in>;
> + };
> + };
> + };
> + };
> +
> + etr@826000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0x826000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + port {
> + etr_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&replicator_out0>;
> + };
> + };
> + };
> +
> + funnel@841000 { /* APSS funnel only 4 inputs are used */
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x841000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + funnel1_in0: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm0_out>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + funnel1_in1: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm1_out>;
> + };
> + };
> + port@2 {
> + reg = <2>;
> + funnel1_in2: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm2_out>;
> + };
> + };
> + port@3 {
> + reg = <3>;
> + funnel1_in3: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm3_out>;
> + };
> + };
> + port@4 {
> + reg = <0>;
> + funnel1_out: endpoint {
> + remote-endpoint = <&funnel0_in4>;
> + };
> + };
> + };
> + };
> +
> + etm@85c000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x85c000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + cpu = <&CPU0>;
> +
> + port {
> + etm0_out: endpoint {
> + remote-endpoint = <&funnel1_in0>;
> + };
> + };
> + };
> +
> + etm@85d000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x85d000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + cpu = <&CPU1>;
> +
> + port {
> + etm1_out: endpoint {
> + remote-endpoint = <&funnel1_in1>;
> + };
> + };
> + };
> +
> + etm@85e000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x85e000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + cpu = <&CPU2>;
> +
> + port {
> + etm2_out: endpoint {
> + remote-endpoint = <&funnel1_in2>;
> + };
> + };
> + };
> +
> + etm@85f000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x85f000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + cpu = <&CPU3>;
> +
> + port {
> + etm3_out: endpoint {
> + remote-endpoint = <&funnel1_in3>;
> + };
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 4221b7d2c0ce..bfaeb9364190 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -14,6 +14,7 @@
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/clock/qcom,gcc-msm8916.h>
> #include <dt-bindings/reset/qcom,gcc-msm8916.h>
> +#include <dt-bindings/clock/qcom,rpmcc.h>
>
> / {
> model = "Qualcomm Technologies, Inc. MSM8916";
> @@ -993,4 +994,5 @@
> };
> };
>
> +#include "msm8916-coresight.dtsi"
> #include "msm8916-pins.dtsi"
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-11-17 18:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-17 15:35 [PATCH v4] arm64: dts: qcom: Add msm8916 CoreSight components Georgi Djakov
[not found] ` <20161117153522.11630-1-georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-11-17 18:59 ` Mathieu Poirier [this message]
[not found] ` <20161117185918.GA7884-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-11-18 12:31 ` Georgi Djakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161117185918.GA7884@linaro.org \
--to=mathieu.poirier-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=iivanov.xz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=zhang.chunyan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).