From: Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
mathieu.poirier-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
zhang.chunyan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
iivanov.xz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Subject: [PATCH v5] arm64: dts: qcom: Add msm8916 CoreSight components
Date: Mon, 21 Nov 2016 18:03:43 +0200 [thread overview]
Message-ID: <20161121160343.8181-1-georgi.djakov@linaro.org> (raw)
From: "Ivan T. Ivanov" <ivan.ivanov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Add initial set of CoreSight components found on Qualcomm msm8916 and
apq8016 based platforms, including the DragonBoard 410c board.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Mathieu Poirier <mathieu.poirier-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
Changes since v4: (https://lkml.org/lkml/2016/11/17/533)
* Move everything into the SoC dtsi file as suggested by Stephen Boyd.
* Updated commit message.
* Got Ack from Mathieu.
Changes since v3: (https://lkml.org/lkml/2015/5/11/134)
* Include msm8916-coresight.dtsi into msm8916.dtsi
Changes since v2: (https://lkml.org/lkml/2015/4/29/242)
* Added "1x" to "qcom,coresight-replicator" compatible string, to match what
devicetree bindings documentations says.
arch/arm64/boot/dts/qcom/msm8916.dtsi | 241 ++++++++++++++++++++++++++++++++++
1 file changed, 241 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 4221b7d2c0ce..464f2740e512 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8916.h>
#include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
/ {
model = "Qualcomm Technologies, Inc. MSM8916";
@@ -853,6 +854,246 @@
memory-region = <&mpss_mem>;
};
};
+
+ tpiu@820000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x820000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ port {
+ tpiu_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out1>;
+ };
+ };
+ };
+
+ funnel@821000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x821000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 0 - connected to Resource and Power Manger CPU ETM
+ * 1 - not-connected
+ * 2 - connected to Modem CPU ETM
+ * 3 - not-connected
+ * 5 - not-connected
+ * 6 - connected trought funnel to Wireless CPU ETM
+ * 7 - connected to STM component
+ */
+
+ port@4 {
+ reg = <4>;
+ funnel0_in4: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel1_out>;
+ };
+ };
+ port@8 {
+ reg = <0>;
+ funnel0_out: endpoint {
+ remote-endpoint = <&etf_in>;
+ };
+ };
+ };
+ };
+
+ replicator@824000 {
+ compatible = "qcom,coresight-replicator1x", "arm,primecell";
+ reg = <0x824000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etr_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ port@2 {
+ reg = <0>;
+ replicator_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&etf_out>;
+ };
+ };
+ };
+ };
+
+ etf@825000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x825000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ etf_out: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel0_out>;
+ };
+ };
+ port@1 {
+ reg = <0>;
+ etf_in: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ };
+ };
+
+ etr@826000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x826000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ port {
+ etr_in: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out0>;
+ };
+ };
+ };
+
+ funnel@841000 { /* APSS funnel only 4 inputs are used */
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x841000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ funnel1_in0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ funnel1_in1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ funnel1_in2: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port@3 {
+ reg = <3>;
+ funnel1_in3: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ port@4 {
+ reg = <0>;
+ funnel1_out: endpoint {
+ remote-endpoint = <&funnel0_in4>;
+ };
+ };
+ };
+ };
+
+ etm@85c000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x85c000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU0>;
+
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel1_in0>;
+ };
+ };
+ };
+
+ etm@85d000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x85d000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU1>;
+
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel1_in1>;
+ };
+ };
+ };
+
+ etm@85e000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x85e000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU2>;
+
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel1_in2>;
+ };
+ };
+ };
+
+ etm@85f000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x85f000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU3>;
+
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel1_in3>;
+ };
+ };
+ };
};
smd {
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
reply other threads:[~2016-11-21 16:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161121160343.8181-1-georgi.djakov@linaro.org \
--to=georgi.djakov-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=iivanov.xz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mathieu.poirier-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=zhang.chunyan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).