From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Benjamin Gaignard
<benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
alexandre.torgue-qxv4g6HH51o@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
knaack.h-Mmb7MZpHnFY@public.gmane.org,
lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org,
pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org,
linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
fabrice.gasnier-qxv4g6HH51o@public.gmane.org,
gerald.baeza-qxv4g6HH51o@public.gmane.org,
arnaud.pouliquen-qxv4g6HH51o@public.gmane.org,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linaro-kernel-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
Benjamin Gaignard
<benjamin.gaignard-qxv4g6HH51o@public.gmane.org>
Subject: Re: [PATCH 2/7] add MFD for stm32 timer IP
Date: Tue, 22 Nov 2016 16:41:06 +0000 [thread overview]
Message-ID: <20161122164106.GJ10134@dell.home> (raw)
In-Reply-To: <20161122163018.GI10134-Re9dqnLqz4GzQB+pC5nmwQ@public.gmane.org>
On Tue, 22 Nov 2016, Lee Jones wrote:
> On Tue, 22 Nov 2016, Benjamin Gaignard wrote:
>
> > This hardware block could at used at same time for PWM generation
> > and IIO timer for other IPs like DAC, ADC or other timers.
> > PWM and IIO timer configuration are mixed in the same registers
> > so we need a MFD to be able to share those registers.
> >
> > Signed-off-by: Benjamin Gaignard <benjamin.gaignard-qxv4g6HH51o@public.gmane.org>
> > ---
> > drivers/mfd/Kconfig | 10 ++
> > drivers/mfd/Makefile | 2 +
> > drivers/mfd/stm32-mfd-timer.c | 236 ++++++++++++++++++++++++++++++++++++
> > include/linux/mfd/stm32-mfd-timer.h | 78 ++++++++++++
> > 4 files changed, 326 insertions(+)
> > create mode 100644 drivers/mfd/stm32-mfd-timer.c
> > create mode 100644 include/linux/mfd/stm32-mfd-timer.h
>
> This driver is going to need a re-write.
>
> However, it's difficult to provide suggestions, since I've been left
> off of the Cc: list for all the other patches.
>
> Please re-send the set with all of the Maintainers Cc'ed on all of
> the patches.
Scrap that -- they all just came trickling through!
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index c6df644..63aee36 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -1607,6 +1607,15 @@ config MFD_STW481X
> > in various ST Microelectronics and ST-Ericsson embedded
> > Nomadik series.
> >
> > +config MFD_STM32_TIMER
> > + tristate "Support for STM32 multifunctions timer"
> > + select MFD_CORE
> > + select REGMAP
> > + depends on ARCH_STM32
> > + depends on OF
> > + help
> > + Select multifunction driver (pwm, IIO trigger) for stm32 timers
> > +
> > menu "Multimedia Capabilities Port drivers"
> > depends on ARCH_SA1100
> >
> > @@ -1644,4 +1653,5 @@ config MFD_VEXPRESS_SYSREG
> > on the ARM Ltd. Versatile Express board.
> >
> > endmenu
> > +
> > endif
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index 9834e66..b348c3e 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -211,3 +211,5 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> > obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
> >
> > obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
> > +
> > +obj-$(CONFIG_MFD_STM32_TIMER) += stm32-mfd-timer.o
> > diff --git a/drivers/mfd/stm32-mfd-timer.c b/drivers/mfd/stm32-mfd-timer.c
> > new file mode 100644
> > index 0000000..67e7db3
> > --- /dev/null
> > +++ b/drivers/mfd/stm32-mfd-timer.c
> > @@ -0,0 +1,236 @@
> > +/*
> > + * stm32-timer.c
> > + *
> > + * Copyright (C) STMicroelectronics 2016
> > + * Author: Benjamin Gaignard <benjamin.gaignard-qxv4g6HH51o@public.gmane.org> for STMicroelectronics.
> > + * License terms: GNU General Public License (GPL), version 2
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +
> > +#include <linux/mfd/stm32-mfd-timer.h>
> > +
> > +static const struct stm32_mfd_timer_cfg mfd_cells_cfg[] = {
> > + {
> > + .pwm_name = "pwm1",
> > + .pwm_compatible = "st,stm32-pwm1",
> > + .trigger_name = "iiotimer1",
> > + .trigger_compatible = "st,stm32-iio-timer1",
> > + },
> > + {
> > + .pwm_name = "pwm2",
> > + .pwm_compatible = "st,stm32-pwm2",
> > + .trigger_name = "iiotimer2",
> > + .trigger_compatible = "st,stm32-iio-timer2",
> > + },
> > + {
> > + .pwm_name = "pwm3",
> > + .pwm_compatible = "st,stm32-pwm3",
> > + .trigger_name = "iiotimer3",
> > + .trigger_compatible = "st,stm32-iio-timer3",
> > + },
> > + {
> > + .pwm_name = "pwm4",
> > + .pwm_compatible = "st,stm32-pwm4",
> > + .trigger_name = "iiotimer4",
> > + .trigger_compatible = "st,stm32-iio-timer4",
> > + },
> > + {
> > + .pwm_name = "pwm5",
> > + .pwm_compatible = "st,stm32-pwm5",
> > + .trigger_name = "iiotimer5",
> > + .trigger_compatible = "st,stm32-iio-timer5",
> > + },
> > + {
> > + .trigger_name = "iiotimer6",
> > + .trigger_compatible = "st,stm32-iio-timer6",
> > + },
> > + {
> > + .trigger_name = "iiotimer7",
> > + .trigger_compatible = "st,stm32-iio-timer7",
> > + },
> > + {
> > + .pwm_name = "pwm8",
> > + .pwm_compatible = "st,stm32-pwm8",
> > + .trigger_name = "iiotimer8",
> > + .trigger_compatible = "st,stm32-iio-timer8",
> > + },
> > + {
> > + .pwm_name = "pwm9",
> > + .pwm_compatible = "st,stm32-pwm9",
> > + .trigger_name = "iiotimer9",
> > + .trigger_compatible = "st,stm32-iio-timer9",
> > + },
> > + {
> > + .pwm_name = "pwm10",
> > + .pwm_compatible = "st,stm32-pwm10",
> > + },
> > + {
> > + .pwm_name = "pwm11",
> > + .pwm_compatible = "st,stm32-pwm11",
> > + },
> > + {
> > + .pwm_name = "pwm12",
> > + .pwm_compatible = "st,stm32-pwm12",
> > + .trigger_name = "iiotimer12",
> > + .trigger_compatible = "st,stm32-iio-timer12",
> > + },
> > + {
> > + .pwm_name = "pwm13",
> > + .pwm_compatible = "st,stm32-pwm13",
> > + },
> > + {
> > + .pwm_name = "pwm14",
> > + .pwm_compatible = "st,stm32-pwm14",
> > + },
> > +};
> > +
> > +static const struct of_device_id stm32_timer_of_match[] = {
> > + {
> > + .compatible = "st,stm32-mfd-timer1",
> > + .data = &mfd_cells_cfg[0],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer2",
> > + .data = &mfd_cells_cfg[1],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer3",
> > + .data = &mfd_cells_cfg[2],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer4",
> > + .data = &mfd_cells_cfg[3],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer5",
> > + .data = &mfd_cells_cfg[4],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer6",
> > + .data = &mfd_cells_cfg[5],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer7",
> > + .data = &mfd_cells_cfg[6],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer8",
> > + .data = &mfd_cells_cfg[7],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer9",
> > + .data = &mfd_cells_cfg[8],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer10",
> > + .data = &mfd_cells_cfg[9],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer11",
> > + .data = &mfd_cells_cfg[10],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer12",
> > + .data = &mfd_cells_cfg[11],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer13",
> > + .data = &mfd_cells_cfg[12],
> > + },
> > + {
> > + .compatible = "st,stm32-mfd-timer14",
> > + .data = &mfd_cells_cfg[13],
> > + },
> > +};
> > +
> > +static const struct regmap_config stm32_timer_regmap_cfg = {
> > + .reg_bits = 32,
> > + .val_bits = 32,
> > + .reg_stride = sizeof(u32),
> > + .max_register = 0x400,
> > + .fast_io = true,
> > +};
> > +
> > +static int stm32_mfd_timer_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct device_node *np = dev->of_node;
> > + struct stm32_mfd_timer_dev *mfd;
> > + struct resource *res;
> > + int ret, nb_cells = 0;
> > + struct mfd_cell *cell = NULL;
> > + void __iomem *mmio;
> > +
> > + mfd = devm_kzalloc(dev, sizeof(*mfd), GFP_KERNEL);
> > + if (!mfd)
> > + return -ENOMEM;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + if (!res)
> > + return -ENOMEM;
> > +
> > + mmio = devm_ioremap_resource(dev, res);
> > + if (IS_ERR(mmio))
> > + return PTR_ERR(mmio);
> > +
> > + mfd->regmap = devm_regmap_init_mmio_clk(dev, "mfd_timer_clk", mmio,
> > + &stm32_timer_regmap_cfg);
> > + if (IS_ERR(mfd->regmap))
> > + return PTR_ERR(mfd->regmap);
> > +
> > + mfd->clk = devm_clk_get(dev, NULL);
> > + if (IS_ERR(mfd->clk))
> > + return PTR_ERR(mfd->clk);
> > +
> > + mfd->irq = platform_get_irq(pdev, 0);
> > + if (mfd->irq < 0)
> > + return -EINVAL;
> > +
> > + /* populate data structure depending on compatibility */
> > + if (!of_match_node(stm32_timer_of_match, np)->data)
> > + return -EINVAL;
> > +
> > + mfd->cfg =
> > + (struct stm32_mfd_timer_cfg *)of_match_node(stm32_timer_of_match, np)->data;
> > +
> > + if (mfd->cfg->pwm_name && mfd->cfg->pwm_compatible) {
> > + cell = &mfd->cells[nb_cells++];
> > + cell->name = mfd->cfg->pwm_name;
> > + cell->of_compatible = mfd->cfg->pwm_compatible;
> > + cell->platform_data = mfd;
> > + cell->pdata_size = sizeof(*mfd);
> > + }
> > +
> > + if (mfd->cfg->trigger_name && mfd->cfg->trigger_compatible) {
> > + cell = &mfd->cells[nb_cells++];
> > + cell->name = mfd->cfg->trigger_name;
> > + cell->of_compatible = mfd->cfg->trigger_compatible;
> > + cell->platform_data = mfd;
> > + cell->pdata_size = sizeof(*mfd);
> > + }
> > +
> > + ret = devm_mfd_add_devices(&pdev->dev, pdev->id, mfd->cells,
> > + nb_cells, NULL, 0, NULL);
> > + if (ret)
> > + return ret;
> > +
> > + platform_set_drvdata(pdev, mfd);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver stm32_mfd_timer_driver = {
> > + .probe = stm32_mfd_timer_probe,
> > + .driver = {
> > + .name = "stm32-mfd-timer",
> > + .of_match_table = stm32_timer_of_match,
> > + },
> > +};
> > +module_platform_driver(stm32_mfd_timer_driver);
> > +
> > +MODULE_DESCRIPTION("STMicroelectronics STM32 Timer MFD");
> > +MODULE_LICENSE("GPL");
> > diff --git a/include/linux/mfd/stm32-mfd-timer.h b/include/linux/mfd/stm32-mfd-timer.h
> > new file mode 100644
> > index 0000000..4a79c22
> > --- /dev/null
> > +++ b/include/linux/mfd/stm32-mfd-timer.h
> > @@ -0,0 +1,78 @@
> > +/*
> > + * stm32-mfd-timer.h
> > + *
> > + * Copyright (C) STMicroelectronics 2016
> > + * Author: Benjamin Gaignard <benjamin.gaignard-qxv4g6HH51o@public.gmane.org> for STMicroelectronics.
> > + * License terms: GNU General Public License (GPL), version 2
> > + */
> > +
> > +#ifndef _LINUX_MFD_STM32_TIMER_H_
> > +#define _LINUX_MFD_STM32_TIMER_H_
> > +
> > +#include <linux/clk.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/regmap.h>
> > +#include <linux/reset.h>
> > +
> > +#define TIM_CR1 0x00 /* Control Register 1 */
> > +#define TIM_CR2 0x04 /* Control Register 2 */
> > +#define TIM_SMCR 0x08 /* Slave mode control reg */
> > +#define TIM_DIER 0x0C /* DMA/interrupt register */
> > +#define TIM_SR 0x10 /* Status register */
> > +#define TIM_EGR 0x14 /* Event Generation Reg */
> > +#define TIM_CCMR1 0x18 /* Capt/Comp 1 Mode Reg */
> > +#define TIM_CCMR2 0x1C /* Capt/Comp 2 Mode Reg */
> > +#define TIM_CCER 0x20 /* Capt/Comp Enable Reg */
> > +#define TIM_PSC 0x28 /* Prescaler */
> > +#define TIM_ARR 0x2c /* Auto-Reload Register */
> > +#define TIM_CCR1 0x34 /* Capt/Comp Register 1 */
> > +#define TIM_CCR2 0x38 /* Capt/Comp Register 2 */
> > +#define TIM_CCR3 0x3C /* Capt/Comp Register 3 */
> > +#define TIM_CCR4 0x40 /* Capt/Comp Register 4 */
> > +#define TIM_BDTR 0x44 /* Break and Dead-Time Reg */
> > +
> > +#define TIM_CR1_CEN BIT(0) /* Counter Enable */
> > +#define TIM_CR1_ARPE BIT(7) /* Auto-reload Preload Ena */
> > +#define TIM_CR2_MMS (BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */
> > +#define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */
> > +#define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */
> > +#define TIM_DIER_UIE BIT(0) /* Update interrupt */
> > +#define TIM_SR_UIF BIT(0) /* Update interrupt flag */
> > +#define TIM_EGR_UG BIT(0) /* Update Generation */
> > +#define TIM_CCMR_PE BIT(3) /* Channel Preload Enable */
> > +#define TIM_CCMR_M1 (BIT(6) | BIT(5)) /* Channel PWM Mode 1 */
> > +#define TIM_CCER_CC1E BIT(0) /* Capt/Comp 1 out Ena */
> > +#define TIM_CCER_CC1P BIT(1) /* Capt/Comp 1 Polarity */
> > +#define TIM_CCER_CC1NE BIT(2) /* Capt/Comp 1N out Ena */
> > +#define TIM_CCER_CC1NP BIT(3) /* Capt/Comp 1N Polarity */
> > +#define TIM_CCER_CCXE (BIT(0) | BIT(4) | BIT(8) | BIT(12))
> > +#define TIM_BDTR_BKE BIT(12) /* Break input enable */
> > +#define TIM_BDTR_BKP BIT(13) /* Break input polarity */
> > +#define TIM_BDTR_AOE BIT(14) /* Automatic Output Enable */
> > +#define TIM_BDTR_MOE BIT(15) /* Main Output Enable */
> > +
> > +#define STM32_TIMER_CELLS 2
> > +#define MAX_TIM_PSC 0xFFFF
> > +
> > +struct stm32_mfd_timer_cfg {
> > + const char *pwm_name;
> > + const char *pwm_compatible;
> > + const char *trigger_name;
> > + const char *trigger_compatible;
> > +};
> > +
> > +struct stm32_mfd_timer_dev {
> > + /* Device data */
> > + struct device *dev;
> > + struct clk *clk;
> > + int irq;
> > +
> > + /* Registers mapping */
> > + struct regmap *regmap;
> > +
> > + /* Private data */
> > + struct mfd_cell cells[STM32_TIMER_CELLS];
> > + struct stm32_mfd_timer_cfg *cfg;
> > +};
> > +
> > +#endif
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2016-11-22 16:41 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-22 16:13 [PATCH 0/7] Add pwm and IIO timer drivers for stm32 Benjamin Gaignard
[not found] ` <1479831207-32699-1-git-send-email-benjamin.gaignard-qxv4g6HH51o@public.gmane.org>
2016-11-22 16:13 ` [PATCH 1/7] add binding for stm32 multifunctions timer driver Benjamin Gaignard
2016-11-22 16:52 ` Lee Jones
2016-11-23 8:15 ` Benjamin Gaignard
2016-11-23 9:21 ` Lee Jones
[not found] ` <20161123092148.GO10134-Re9dqnLqz4GzQB+pC5nmwQ@public.gmane.org>
2016-11-23 17:02 ` Benjamin Gaignard
[not found] ` <CA+M3ks6rnago88JC0C5Uj6JpGZGuwyoOj-W8+r7Oj4s8_GuXyA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-24 8:52 ` Lee Jones
2016-11-22 16:13 ` [PATCH 2/7] add MFD for stm32 timer IP Benjamin Gaignard
2016-11-22 16:30 ` Lee Jones
[not found] ` <20161122163018.GI10134-Re9dqnLqz4GzQB+pC5nmwQ@public.gmane.org>
2016-11-22 16:41 ` Lee Jones [this message]
2016-11-22 16:40 ` Benjamin Gaignard
2016-11-22 16:13 ` [PATCH 3/7] add pwm-stm32 DT bindings Benjamin Gaignard
2016-11-22 16:13 ` [PATCH 4/7] add pwm driver for stm32 plaftorm Benjamin Gaignard
2016-11-22 16:13 ` [PATCH 5/7] add bindings for stm32 IIO timer drivers Benjamin Gaignard
[not found] ` <1479831207-32699-6-git-send-email-benjamin.gaignard-qxv4g6HH51o@public.gmane.org>
2016-11-22 16:53 ` Lars-Peter Clausen
2016-11-22 17:01 ` Benjamin Gaignard
2016-11-22 17:02 ` Lars-Peter Clausen
[not found] ` <CA+M3ks6ZoOND4VobU65OntEYU-f_XoNCV4wNZZ0_dYoOxy73+w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-22 17:18 ` Lee Jones
[not found] ` <20161122171820.GL10134-Re9dqnLqz4GzQB+pC5nmwQ@public.gmane.org>
2016-11-23 8:17 ` Benjamin Gaignard
[not found] ` <CA+M3ks7MgnUJoDoNG157+MbdhgbqwzRmhPcD-uQKC7_DJVAK6A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-28 21:44 ` Rob Herring
2016-11-22 16:13 ` [PATCH 6/7] add STM32 IIO timer driver Benjamin Gaignard
2016-11-22 16:13 ` [PATCH 7/7] add stm32 multi-functions timer driver in DT Benjamin Gaignard
2016-11-22 17:00 ` Alexandre Torgue
2016-11-23 9:53 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161122164106.GJ10134@dell.home \
--to=lee.jones-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=alexandre.torgue-qxv4g6HH51o@public.gmane.org \
--cc=arnaud.pouliquen-qxv4g6HH51o@public.gmane.org \
--cc=benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=benjamin.gaignard-qxv4g6HH51o@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabrice.gasnier-qxv4g6HH51o@public.gmane.org \
--cc=gerald.baeza-qxv4g6HH51o@public.gmane.org \
--cc=jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=knaack.h-Mmb7MZpHnFY@public.gmane.org \
--cc=lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org \
--cc=linaro-kernel-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).