[PATCH v7 0/4] Add basic support for the I2C units of the Armada 3700

[PATCH v7 0/4] Add basic support for the I2C units of the Armada 3700

[Romain Perier]

This series add basic support for the I2C bus interface units present
in the Armada 3700 to the pxa-i2c driver. It also add the definitions of
the device nodes to the devicetree at the SoC level and for its official
development board: the Armada 3720 DB.

Romain Perier (4):
  i2c: pxa: Add definition of fast and high speed modes via the regs
    layout
  i2c: pxa: Add support for the I2C units found in Armada 3700
  arm64: dts: marvell: Add I2C definitions for the Armada 3700
  dt-bindings: i2c: pxa: Update the documentation for the Armada 3700

 Documentation/devicetree/bindings/i2c/i2c-pxa.txt |  1 +
 arch/arm64/boot/dts/marvell/armada-3720-db.dts    |  4 ++++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi      | 18 ++++++++++++++++
 drivers/i2c/busses/Kconfig                        |  2 +-
 drivers/i2c/busses/i2c-pxa.c                      | 26 +++++++++++++++++++++--
 5 files changed, 48 insertions(+), 3 deletions(-)

-- 
2.9.3

[PATCH v7 1/4] i2c: pxa: Add definition of fast and high speed modes via the regs layout

[Romain Perier]

So far, the bit masks for the fast and high speed mode were statically
defined. Some IP blocks might use different bits for these modes.

This commit introduces new fields in order to enable the definition of
different bit masks for these features. If these fields are undefined,
ICR_FM and ICR_HS are selected to preserve backward compatibility with
other IPs.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
---

Changes in v7:
 - Fixed line over 80 characters for fm_mask and hs_mask in the probe
   function.

 drivers/i2c/busses/i2c-pxa.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index e28b825..b4ac235 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -48,6 +48,8 @@ struct pxa_reg_layout {
 	u32 isar;
 	u32 ilcr;
 	u32 iwcr;
+	u32 fm;
+	u32 hs;
 };
 
 enum pxa_i2c_types {
@@ -193,6 +195,8 @@ struct pxa_i2c {
 	unsigned char		master_code;
 	unsigned long		rate;
 	bool			highmode_enter;
+	u32			fm_mask;
+	u32			hs_mask;
 };
 
 #define _IBMR(i2c)	((i2c)->reg_ibmr)
@@ -503,8 +507,8 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
 		writel(i2c->slave_addr, _ISAR(i2c));
 
 	/* set control register values */
-	writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
-	writel(readl(_ICR(i2c)) | (i2c->high_mode ? ICR_HS : 0), _ICR(i2c));
+	writel(I2C_ICR_INIT | (i2c->fast_mode ? i2c->fm_mask : 0), _ICR(i2c));
+	writel(readl(_ICR(i2c)) | (i2c->high_mode ? i2c->hs_mask : 0), _ICR(i2c));
 
 #ifdef CONFIG_I2C_PXA_SLAVE
 	dev_info(&i2c->adap.dev, "Enabling slave mode\n");
@@ -1234,6 +1238,9 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr;
 	i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr;
 	i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr;
+	i2c->fm_mask = pxa_reg_layout[i2c_type].fm ? : ICR_FM;
+	i2c->hs_mask = pxa_reg_layout[i2c_type].hs ? : ICR_HS;
+
 	if (i2c_type != REGS_CE4100)
 		i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;
 
-- 
2.9.3

[PATCH v7 2/4] i2c: pxa: Add support for the I2C units found in Armada 3700

[Romain Perier]

The Armada 3700 has two I2C controllers that is compliant with the I2C
Bus Specificiation 2.1, supports multi-master and different bus speed:
Standard mode (up to 100 KHz), Fast mode (up to 400 KHz),
High speed mode (up to 3.4 Mhz).

This IP block has a lot of similarity with the PXA, except some register
offsets and bitfield. This commits adds a basic support for this I2C
unit.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---

Changes in v6:
 - Revert back A3700_REGS, as asked by Wolfram and define fm_mask
   and hs_mask in the register layout. I moved the generic code
   for fm_mask and hs_mask to a seperated commit (1/4)

Changes in v5:
 - Don't define registers for armada-3700, we can re-use the ones
   for PXA3XX.
 - Define registers mask when OF is not used, in probe_pdata. 

Changes in v4:
 - Replaced the type of hs_mask and fm_mask by u32, instead of
   unsigned int, As writel() take an u32 as first argument...

Changes in v3:
 - Replaced the type of hs_mask and fm_mask by unsigned int,
   instead of unsigned long.

 drivers/i2c/busses/Kconfig   |  2 +-
 drivers/i2c/busses/i2c-pxa.c | 15 +++++++++++++++
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d252276..2f56a26 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -763,7 +763,7 @@ config I2C_PUV3
 
 config I2C_PXA
 	tristate "Intel PXA2XX I2C adapter"
-	depends on ARCH_PXA || ARCH_MMP || (X86_32 && PCI && OF)
+	depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF)
 	help
 	  If you have devices in the PXA I2C bus, say yes to this option.
 	  This driver can also be built as a module.  If so, the module
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index b4ac235..6cf333e 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -57,8 +57,12 @@ enum pxa_i2c_types {
 	REGS_PXA3XX,
 	REGS_CE4100,
 	REGS_PXA910,
+	REGS_A3700,
 };
 
+#define ICR_BUSMODE_FM	(1 << 16)	   /* shifted fast mode for armada-3700 */
+#define ICR_BUSMODE_HS	(1 << 17)	   /* shifted high speed mode for armada-3700 */
+
 /*
  * I2C registers definitions
  */
@@ -93,6 +97,15 @@ static struct pxa_reg_layout pxa_reg_layout[] = {
 		.ilcr = 0x28,
 		.iwcr = 0x30,
 	},
+	[REGS_A3700] = {
+		.ibmr =	0x00,
+		.idbr =	0x04,
+		.icr =	0x08,
+		.isr =	0x0c,
+		.isar =	0x10,
+		.fm = ICR_BUSMODE_FM,
+		.hs = ICR_BUSMODE_HS,
+	},
 };
 
 static const struct platform_device_id i2c_pxa_id_table[] = {
@@ -100,6 +113,7 @@ static const struct platform_device_id i2c_pxa_id_table[] = {
 	{ "pxa3xx-pwri2c",	REGS_PXA3XX },
 	{ "ce4100-i2c",		REGS_CE4100 },
 	{ "pxa910-i2c",		REGS_PXA910 },
+	{ "armada-3700-i2c",	REGS_A3700  },
 	{ },
 };
 MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
@@ -1141,6 +1155,7 @@ static const struct of_device_id i2c_pxa_dt_ids[] = {
 	{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
 	{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
 	{ .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 },
+	{ .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 },
 	{}
 };
 MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
-- 
2.9.3

[PATCH v7 3/4] arm64: dts: marvell: Add I2C definitions for the Armada 3700

[Romain Perier]

The Armada 3700 has two i2c bus interface units, this commit adds the
definitions of the corresponding device nodes. It also enables the node
on the development board for this SoC.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts |  4 ++++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi   | 18 ++++++++++++++++++
 2 files changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 1372e9a6..16d84af 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -62,6 +62,10 @@
 	};
 };
 
+&i2c0 {
+	status = "okay";
+};
+
 /* CON3 */
 &sata {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index e9bd587..1b0fd21 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -98,6 +98,24 @@
 			/* 32M internal register @ 0xd000_0000 */
 			ranges = <0x0 0x0 0xd0000000 0x2000000>;
 
+			i2c0: i2c@11000 {
+				compatible = "marvell,armada-3700-i2c";
+				reg = <0x11000 0x24>;
+				clocks = <&nb_periph_clk 10>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11080 {
+				compatible = "marvell,armada-3700-i2c";
+				reg = <0x11080 0x24>;
+				clocks = <&nb_periph_clk 9>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
 			uart0: serial@12000 {
 				compatible = "marvell,armada-3700-uart";
 				reg = <0x12000 0x400>;
-- 
2.9.3

[PATCH v7 4/4] dt-bindings: i2c: pxa: Update the documentation for the Armada 3700

[Romain Perier]

This commit documents the compatible string to have the compatibility for
the I2C unit found in the Armada 3700.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
---

Changes in v5:
 - Added the tag 'Acked-by', by Rob Herring

Changes in v2:
 - Fixed wrong compatible string, it should be "marvell,armada-3700-i2c"
   and not "marvell,armada-3700".

 Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
index 12b78ac..d30f0b1 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt
@@ -7,6 +7,7 @@ Required properties :
    compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
    For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
    as shown in the example below.
+   For the Armada 3700, the compatible should be "marvell,armada-3700-i2c".
 
 Recommended properties :
 
-- 
2.9.3

Re: [PATCH v7 4/4] dt-bindings: i2c: pxa: Update the documentation for the Armada 3700

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 331 bytes --]

On Thu, Dec 01, 2016 at 12:04:40PM +0100, Romain Perier wrote:
> This commit documents the compatible string to have the compatibility for
> the I2C unit found in the Armada 3700.
> 
> Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
> Acked-by: Rob Herring <robh@kernel.org>

Applied to for-next, thanks!


[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v7 1/4] i2c: pxa: Add definition of fast and high speed modes via the regs layout

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 552 bytes --]

On Thu, Dec 01, 2016 at 12:04:37PM +0100, Romain Perier wrote:
> So far, the bit masks for the fast and high speed mode were statically
> defined. Some IP blocks might use different bits for these modes.
> 
> This commit introduces new fields in order to enable the definition of
> different bit masks for these features. If these fields are undefined,
> ICR_FM and ICR_HS are selected to preserve backward compatibility with
> other IPs.
> 
> Signed-off-by: Romain Perier <romain.perier@free-electrons.com>

Applied to for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v7 2/4] i2c: pxa: Add support for the I2C units found in Armada 3700

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 642 bytes --]

On Thu, Dec 01, 2016 at 12:04:38PM +0100, Romain Perier wrote:
> The Armada 3700 has two I2C controllers that is compliant with the I2C
> Bus Specificiation 2.1, supports multi-master and different bus speed:
> Standard mode (up to 100 KHz), Fast mode (up to 400 KHz),
> High speed mode (up to 3.4 Mhz).
> 
> This IP block has a lot of similarity with the PXA, except some register
> offsets and bitfield. This commits adds a basic support for this I2C
> unit.
> 
> Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Applied to for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v7 3/4] arm64: dts: marvell: Add I2C definitions for the Armada 3700

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 488 bytes --]

On Thu, Dec 01, 2016 at 12:04:39PM +0100, Romain Perier wrote:
> The Armada 3700 has two i2c bus interface units, this commit adds the
> definitions of the corresponding device nodes. It also enables the node
> on the development board for this SoC.
> 
> Signed-off-by: Romain Perier <romain.perier-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> Acked-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

This needs to go via arm-soc.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v7 3/4] arm64: dts: marvell: Add I2C definitions for the Armada 3700

[Gregory CLEMENT]

Hi Romain,
 
 On jeu., déc. 01 2016, Romain Perier <romain.perier@free-electrons.com> wrote:

> The Armada 3700 has two i2c bus interface units, this commit adds the
> definitions of the corresponding device nodes. It also enables the node
> on the development board for this SoC.
>
> Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Applied on mvebu/dt64

Thanks,

Gregory

> ---
>  arch/arm64/boot/dts/marvell/armada-3720-db.dts |  4 ++++
>  arch/arm64/boot/dts/marvell/armada-37xx.dtsi   | 18 ++++++++++++++++++
>  2 files changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> index 1372e9a6..16d84af 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
> @@ -62,6 +62,10 @@
>  	};
>  };
>  
> +&i2c0 {
> +	status = "okay";
> +};
> +
>  /* CON3 */
>  &sata {
>  	status = "okay";
> diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> index e9bd587..1b0fd21 100644
> --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
> @@ -98,6 +98,24 @@
>  			/* 32M internal register @ 0xd000_0000 */
>  			ranges = <0x0 0x0 0xd0000000 0x2000000>;
>  
> +			i2c0: i2c@11000 {
> +				compatible = "marvell,armada-3700-i2c";
> +				reg = <0x11000 0x24>;
> +				clocks = <&nb_periph_clk 10>;
> +				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> +				mrvl,i2c-fast-mode;
> +				status = "disabled";
> +			};
> +
> +			i2c1: i2c@11080 {
> +				compatible = "marvell,armada-3700-i2c";
> +				reg = <0x11080 0x24>;
> +				clocks = <&nb_periph_clk 9>;
> +				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> +				mrvl,i2c-fast-mode;
> +				status = "disabled";
> +			};
> +
>  			uart0: serial@12000 {
>  				compatible = "marvell,armada-3700-uart";
>  				reg = <0x12000 0x400>;
> -- 
> 2.9.3
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel