[PATCH] arm64: dts: zx: add pcu_domain node for zx296718

[PATCH] arm64: dts: zx: add pcu_domain node for zx296718

[Baoyou Xie]

This patch adds the pcu_domain node, so it can be used
by zte-soc's power domain driver.

Furthermore, it adds the document of the node.

Signed-off-by: Baoyou Xie <baoyou.xie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/zte.txt | 11 +++++++++++
 arch/arm64/boot/dts/zte/zx296718.dtsi         |  7 +++++++
 2 files changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte.txt
index 83369785..19a7e1b 100644
--- a/Documentation/devicetree/bindings/arm/zte.txt
+++ b/Documentation/devicetree/bindings/arm/zte.txt
@@ -27,6 +27,9 @@ System management required properties:
       - compatible = "zte,zx296718-aon-sysctrl"
       - compatible = "zte,zx296718-sysctrl"
 
+Low power management required properties:
+      - compatible = "zte,zx296718-pcu"
+
 Example:
 aon_sysctrl: aon-sysctrl@116000 {
 	compatible = "zte,zx296718-aon-sysctrl", "syscon";
@@ -37,3 +40,11 @@ sysctrl: sysctrl@1463000 {
 	compatible = "zte,zx296718-sysctrl", "syscon";
 	reg = <0x1463000 0x1000>;
 };
+
+pcu_domain: pcu@0x00117000 {
+        compatible = "zte,zx296718-pcu";
+        reg = <0x00117000 0x1000>;
+        #power-domain-cells = <1>;
+        status = "ok";
+};
+
diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
index b44d1d1..39e70c7 100644
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -351,5 +351,12 @@
 			reg = <0x01480000 0x1000>;
 			#clock-cells = <1>;
 		};
+
+		pcu_domain: pcu@0x00117000 {
+			compatible = "zte,zx296718-pcu";
+			reg = <0x00117000 0x1000>;
+			#power-domain-cells = <1>;
+			status = "ok";
+		};
 	};
 };
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] arm64: dts: zx: add pcu_domain node for zx296718

[Shawn Guo]

On Sat, Dec 03, 2016 at 07:59:14PM +0800, Baoyou Xie wrote:
> This patch adds the pcu_domain node, so it can be used
> by zte-soc's power domain driver.
> 
> Furthermore, it adds the document of the node.
> 
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
> ---
>  Documentation/devicetree/bindings/arm/zte.txt | 11 +++++++++++

DT bindings doc should be a separate patch, and goes together with
driver changes using the bindings through subsystem maintainers, rather
than dts patches.

>  arch/arm64/boot/dts/zte/zx296718.dtsi         |  7 +++++++
>  2 files changed, 18 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte.txt
> index 83369785..19a7e1b 100644
> --- a/Documentation/devicetree/bindings/arm/zte.txt
> +++ b/Documentation/devicetree/bindings/arm/zte.txt
> @@ -27,6 +27,9 @@ System management required properties:
>        - compatible = "zte,zx296718-aon-sysctrl"
>        - compatible = "zte,zx296718-sysctrl"
>  
> +Low power management required properties:
> +      - compatible = "zte,zx296718-pcu"
> +
>  Example:
>  aon_sysctrl: aon-sysctrl@116000 {
>  	compatible = "zte,zx296718-aon-sysctrl", "syscon";
> @@ -37,3 +40,11 @@ sysctrl: sysctrl@1463000 {
>  	compatible = "zte,zx296718-sysctrl", "syscon";
>  	reg = <0x1463000 0x1000>;
>  };
> +
> +pcu_domain: pcu@0x00117000 {
> +        compatible = "zte,zx296718-pcu";
> +        reg = <0x00117000 0x1000>;
> +        #power-domain-cells = <1>;
> +        status = "ok";
> +};
> +

I think we should have a separate bindings doc for PCU power domain
block in Documentation/devicetree/bindings/soc/zte.

> diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
> index b44d1d1..39e70c7 100644
> --- a/arch/arm64/boot/dts/zte/zx296718.dtsi
> +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
> @@ -351,5 +351,12 @@
>  			reg = <0x01480000 0x1000>;
>  			#clock-cells = <1>;
>  		};
> +
> +		pcu_domain: pcu@0x00117000 {

Please drop the 0x and leading zeros in unit-address after node name.
That said, the node name should be written like below:

	pcu@117000 {

Also, please sort the node with unit-address in order of the address.
That means that pcu node should be put after aon-sysctrl@116000.

> +			compatible = "zte,zx296718-pcu";
> +			reg = <0x00117000 0x1000>;
> +			#power-domain-cells = <1>;
> +			status = "ok";

The property 'status' is generally used to enable devices that have
board-level pin-out or configuration in board dts.  It's not really
necessary for pcu here.

Shawn

> +		};
>  	};
>  };
> -- 
> 2.7.4
>