Re: [PATCH 4/5] arm64: dts: exynos5433: Add bus dt node using VDD_INT for Exynos5433

[Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

On Fri, Dec 02, 2016 at 04:18:06PM +0900, Chanwoo Choi wrote:
> This patch adds the bus nodes using VDD_INT for Exynos5433 SoC.
> Exynos5433 has the following AMBA AXI buses to translate data
> between DRAM and sub-blocks.
> 
> Following list specify the detailed correlation between sub-block and clock:
> - CLK_ACLK_G2D_{400|266}  : Bus clock for G2D
> - CLK_ACLK_MSCL_400       : Bus clock for MSCL (Mobile Scaler)
> - CLK_ACLK_GSCL_333       : Bus clock for GSCL (General Scaler)
> - CLK_SCLK_JPEG_MSCL      : Bus clock for JPEG
> - CLK_ACLK_MFC_400        : Bus clock for MFC (Multi Format Codec)
> - CLK_ACLK_HEVC_400       : Bus clock for HEVC (High Effective Video Codec)
> - CLK_ACLK_BUS0_400       : NoC(Network On Chip)'s bus clock for PERIC/PERIS/FSYS/MSCL
> - CLK_ACLK_BUS1_400       : NoC's bus clock for MFC/HEVC/G3D
> - CLK_ACLK_BUS2_400       : NoC's bus clock for GSCL/DISP/G2D/CAM0/CAM1/ISP
> 
> Signed-off-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> ---
>  arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi | 208 +++++++++++++++++++++++++
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi     |   1 +
>  2 files changed, 209 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
> new file mode 100644
> index 000000000000..b1e1d9c622e1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
> @@ -0,0 +1,208 @@
> +/*
> + * Samsung's Exynos5433 SoC Memory interface and AMBA bus device tree source
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + * Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> + *
> + * Samsung's Exynos5433 SoC Memory interface and AMBA buses are listed
> + * as device tree nodes are listed in this file.

This duplicates the introduction line and does not make sense.

> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/ {

Shouldn't these be under soc node? It looks like property of SoC itself.

> +	/* INT (Internal) block using VDD_INT */
> +	bus_g2d_400: bus_g2d_400 {

In node name, the dash '-' is preferred. The name should describe
general class of device so probably this should be just "bus"... but I
don't see a way how to do it reasonable anyway.

> +		compatible = "samsung,exynos-bus";
> +		clocks = <&cmu_top CLK_ACLK_G2D_400>;
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_g2d_400_opp_table>;
> +		status ="disable";

Hm?


> +	};
> +
> +	bus_mscl: bus_mscl {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&cmu_top CLK_ACLK_MSCL_400>;
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_g2d_400_opp_table>;
> +		status ="disable";
> +	};
> +
> +	bus_jpeg: bus_jpeg {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&cmu_top CLK_SCLK_JPEG_MSCL>;
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_g2d_400_opp_table>;
> +		status ="disable";
> +	};
> +
> +	bus_mfc: bus_mfc {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&cmu_top CLK_ACLK_MFC_400>;
> +
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_g2d_400_opp_table>;
> +		status ="disable";
> +	};
> +
> +	bus_g2d_266: bus_g2d_266 {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&cmu_top CLK_ACLK_G2D_266>;
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_g2d_266_opp_table>;
> +		status ="disable";
> +	};
> +
> +	bus_gscl: bus_gscl {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&cmu_top CLK_ACLK_GSCL_333>;
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_gscl_opp_table>;
> +		status ="disable";
> +	};
> +
> +	bus_hevc: bus_hevc {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&cmu_top CLK_ACLK_HEVC_400>;
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_hevc_opp_table>;
> +		status ="disable";
> +	};
> +
> +	bus_bus0: bus_bus0 {

bus, bus, bus, bus, jackpot! Let's try to find better name and label for
these. :)

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html