[PATCH v2 1/3] powerpc/fsl/dts: add QMan and BMan portal nodes on t1023rdb

[PATCH v2 1/3] powerpc/fsl/dts: add QMan and BMan portal nodes on t1023rdb

[Madalin Bucur]

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 arch/powerpc/boot/dts/fsl/t1023rdb.dts      |  29 ++++++++
 arch/powerpc/boot/dts/fsl/t1023si-post.dtsi | 103 ++++++++++++++++++++++++++++
 2 files changed, 132 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
index 2975762..5ba6fbf 100644
--- a/arch/powerpc/boot/dts/fsl/t1023rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
@@ -41,6 +41,27 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
 	ifc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x2000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -72,6 +93,14 @@
 		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
 	};
 
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index 6e0b489..da2894c 100644
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -34,6 +34,21 @@
 
 #include <dt-bindings/thermal/thermal.h>
 
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
@@ -180,6 +195,92 @@
 	};
 };
 
+&bportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		cell-index = <0x0>;
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		cell-index = <0x1>;
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		cell-index = <2>;
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		cell-index = <0x3>;
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		cell-index = <0x4>;
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		cell-index = <0x5>;
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+};
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -413,6 +514,8 @@
 	};
 
 /include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
+/include/ "qoriq-bman1.dtsi"
 
 /include/ "qoriq-fman3l-0.dtsi"
 /include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"
-- 
2.1.0

[PATCH v2 2/3] powerpc/fsl/dts: add QMan and BMan portal nodes on t1024

[Madalin Bucur]

Signed-off-by: Madalin Bucur <madalin.bucur-3arQi8VN3Tc@public.gmane.org>
---
 arch/powerpc/boot/dts/fsl/t1024qds.dts | 29 +++++++++++++++++++++++++++++
 arch/powerpc/boot/dts/fsl/t1024rdb.dts | 33 +++++++++++++++++++++++++++++++++
 2 files changed, 62 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/t1024qds.dts b/arch/powerpc/boot/dts/fsl/t1024qds.dts
index 772143d..d6858b7 100644
--- a/arch/powerpc/boot/dts/fsl/t1024qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t1024qds.dts
@@ -41,6 +41,27 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
 	ifc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x2000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -80,6 +101,14 @@
 		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
 	};
 
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;
diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
index 302cdd2..73a6453 100644
--- a/arch/powerpc/boot/dts/fsl/t1024rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
@@ -41,6 +41,31 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	aliases {
+		sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
 	ifc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x2000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -82,6 +107,14 @@
 		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
 	};
 
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/3] powerpc/fsl/dts: add FMan node for t1042d4rdb

[Madalin Bucur]

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 arch/powerpc/boot/dts/fsl/t1042d4rdb.dts | 52 ++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
index 2a5a90d..fcd2aeb 100644
--- a/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
@@ -48,6 +48,58 @@
 					"fsl,deepsleep-cpld";
 		};
 	};
+
+	soc: soc@ffe000000 {
+		fman0: fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_1>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			mdio0: mdio@fc000 {
+				phy_sgmii_0: ethernet-phy@02 {
+					reg = <0x02>;
+				};
+
+				phy_sgmii_1: ethernet-phy@03 {
+					reg = <0x03>;
+				};
+
+				phy_sgmii_2: ethernet-phy@01 {
+					reg = <0x01>;
+				};
+
+				phy_rgmii_0: ethernet-phy@04 {
+					reg = <0x04>;
+				};
+
+				phy_rgmii_1: ethernet-phy@05 {
+					reg = <0x05>;
+				};
+			};
+		};
+	};
+
 };
 
 #include "t1042si-post.dtsi"
-- 
2.1.0

Re: [v2,2/3] powerpc/fsl/dts: add QMan and BMan portal nodes on t1024

[Scott Wood]

On Tue, Dec 06, 2016 at 03:13:38PM +0200, Madalin Bucur wrote:
> Signed-off-by: Madalin Bucur <madalin.bucur-3arQi8VN3Tc@public.gmane.org>
> ---
>  arch/powerpc/boot/dts/fsl/t1024qds.dts | 29 +++++++++++++++++++++++++++++
>  arch/powerpc/boot/dts/fsl/t1024rdb.dts | 33 +++++++++++++++++++++++++++++++++
>  2 files changed, 62 insertions(+)

So, in patch 1/3 you add qman and bman nodes to t1023si-post.dtsi and
call it "add QMan and BMan portal nodes on t1023rdb" as if it were
board-specific (the only board-specific part is the reserved-memory
nodes, not the portals).

Then, in this patch you only touch board-specific files, and label it
"add QMan and BMan portal nodes on t1024"...

> diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
> index 302cdd2..73a6453 100644
> --- a/arch/powerpc/boot/dts/fsl/t1024rdb.dts
> +++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
> @@ -41,6 +41,31 @@
>  	#size-cells = <2>;
>  	interrupt-parent = <&mpic>;
>  
> +	aliases {
> +		sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4;
> +	};

What does this have to do with the qman and bman portal nodes?  Why is
this alias needed?

-Scott
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [v2,2/3] powerpc/fsl/dts: add QMan and BMan portal nodes on t1024

[Madalin-Cristian Bucur]

> From: Scott Wood [mailto:oss-fOR+EgIDQEHk1uMJSBkQmQ@public.gmane.org]
> Sent: Wednesday, December 07, 2016 2:59 AM
> 
> On Tue, Dec 06, 2016 at 03:13:38PM +0200, Madalin Bucur wrote:
> > Signed-off-by: Madalin Bucur <madalin.bucur-3arQi8VN3Tc@public.gmane.org>
> > ---
> >  arch/powerpc/boot/dts/fsl/t1024qds.dts | 29
> +++++++++++++++++++++++++++++
> >  arch/powerpc/boot/dts/fsl/t1024rdb.dts | 33
> +++++++++++++++++++++++++++++++++
> >  2 files changed, 62 insertions(+)
> 
> So, in patch 1/3 you add qman and bman nodes to t1023si-post.dtsi and
> call it "add QMan and BMan portal nodes on t1023rdb" as if it were
> board-specific (the only board-specific part is the reserved-memory
> nodes, not the portals).
> 
> Then, in this patch you only touch board-specific files, and label it
> "add QMan and BMan portal nodes on t1024"...

That needs fixing...

> > diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts
> b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
> > index 302cdd2..73a6453 100644
> > --- a/arch/powerpc/boot/dts/fsl/t1024rdb.dts
> > +++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
> > @@ -41,6 +41,31 @@
> >  	#size-cells = <2>;
> >  	interrupt-parent = <&mpic>;
> >
> > +	aliases {
> > +		sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4;
> > +	};
> 
> What does this have to do with the qman and bman portal nodes?  Why is
> this alias needed?
> 
> -Scott

It's needed by u-boot, should be a separate patch.
I'll resend.

Madalin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html