[PATCH v2 1/7] ARM: dts: imx6qdl: Add VDOA compatible and clocks properties

[Michael Tretter <m.tretter@pengutronix.de>]

From: Philipp Zabel <philipp.zabel@gmail.com>

This adds a compatible property and the correct clock for the
i.MX6Q Video Data Order Adapter.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
 .../devicetree/bindings/media/fsl-vdoa.txt          | 21 +++++++++++++++++++++
 arch/arm/boot/dts/imx6qdl.dtsi                      |  2 ++
 2 files changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/fsl-vdoa.txt

diff --git a/Documentation/devicetree/bindings/media/fsl-vdoa.txt b/Documentation/devicetree/bindings/media/fsl-vdoa.txt
new file mode 100644
index 0000000..5e45f9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl-vdoa.txt
@@ -0,0 +1,21 @@
+Freescale Video Data Order Adapter
+==================================
+
+The Video Data Order Adapter (VDOA) is present on the i.MX6q. Its sole purpose
+it to to reorder video data from the macroblock tiled order produced by the
+CODA 960 VPU to the conventional raster-scan order for scanout.
+
+Required properties:
+- compatible: must be "fsl,imx6q-vdoa"
+- reg: the register base and size for the device registers
+- interrupts: the VDOA interrupt
+- clocks: the vdoa clock
+
+Example:
+
+vdoa@021e4000 {
+        compatible = "fsl,imx6q-vdoa";
+        reg = <0x021e4000 0x4000>;
+        interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_VDOA>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b13b0b2..69e3668 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1153,8 +1153,10 @@
 			};
 
 			vdoa@021e4000 {
+				compatible = "fsl,imx6q-vdoa";
 				reg = <0x021e4000 0x4000>;
 				interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_VDOA>;
 			};
 
 			uart2: serial@021e8000 {
-- 
2.10.2