From: Rob Herring <robh@kernel.org>
To: Michael Tretter <m.tretter@pengutronix.de>
Cc: linux-media@vger.kernel.org,
Philipp Zabel <p.zabel@pengutronix.de>,
devicetree@vger.kernel.org, Hans Verkuil <hans.verkuil@cisco.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Philipp Zabel <philipp.zabel@gmail.com>
Subject: Re: [PATCH v2 1/7] ARM: dts: imx6qdl: Add VDOA compatible and clocks properties
Date: Tue, 13 Dec 2016 12:52:54 -0600 [thread overview]
Message-ID: <20161213185254.ztedtt3bpod2hbci@rob-hp-laptop> (raw)
In-Reply-To: <20161209165903.1293-2-m.tretter@pengutronix.de>
On Fri, Dec 09, 2016 at 05:58:57PM +0100, Michael Tretter wrote:
> From: Philipp Zabel <philipp.zabel@gmail.com>
>
> This adds a compatible property and the correct clock for the
> i.MX6Q Video Data Order Adapter.
This comment matches the dts change, but not the binding change.
> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> ---
> .../devicetree/bindings/media/fsl-vdoa.txt | 21 +++++++++++++++++++++
> arch/arm/boot/dts/imx6qdl.dtsi | 2 ++
> 2 files changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/fsl-vdoa.txt
>
> diff --git a/Documentation/devicetree/bindings/media/fsl-vdoa.txt b/Documentation/devicetree/bindings/media/fsl-vdoa.txt
> new file mode 100644
> index 0000000..5e45f9b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/fsl-vdoa.txt
> @@ -0,0 +1,21 @@
> +Freescale Video Data Order Adapter
> +==================================
> +
> +The Video Data Order Adapter (VDOA) is present on the i.MX6q. Its sole purpose
> +it to to reorder video data from the macroblock tiled order produced by the
s/it to/is/
> +CODA 960 VPU to the conventional raster-scan order for scanout.
> +
> +Required properties:
> +- compatible: must be "fsl,imx6q-vdoa"
> +- reg: the register base and size for the device registers
> +- interrupts: the VDOA interrupt
> +- clocks: the vdoa clock
> +
> +Example:
> +
> +vdoa@021e4000 {
Drop the leading 0.
> + compatible = "fsl,imx6q-vdoa";
> + reg = <0x021e4000 0x4000>;
> + interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6QDL_CLK_VDOA>;
> +};
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index b13b0b2..69e3668 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -1153,8 +1153,10 @@
> };
>
> vdoa@021e4000 {
> + compatible = "fsl,imx6q-vdoa";
> reg = <0x021e4000 0x4000>;
> interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6QDL_CLK_VDOA>;
> };
>
> uart2: serial@021e8000 {
> --
> 2.10.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-12-13 18:52 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-09 16:58 [PATCH v2 0/7] Add support for Video Data Order Adapter Michael Tretter
2016-12-09 16:58 ` [PATCH v2 1/7] ARM: dts: imx6qdl: Add VDOA compatible and clocks properties Michael Tretter
2016-12-13 18:52 ` Rob Herring [this message]
2016-12-09 16:58 ` [PATCH v2 2/7] [media] coda: add i.MX6 VDOA driver Michael Tretter
[not found] ` <20161209165903.1293-1-m.tretter-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-12-09 16:58 ` [PATCH v2 3/7] [media] coda: correctly set capture compose rectangle Michael Tretter
2016-12-09 16:59 ` [PATCH v2 4/7] [media] coda: add debug output about tiling Michael Tretter
2016-12-09 16:59 ` [PATCH v2 5/7] [media] coda: fix frame index to returned error Michael Tretter
2016-12-09 16:59 ` [PATCH v2 6/7] [media] coda: use VDOA for un-tiling custom macroblock format Michael Tretter
2016-12-09 16:59 ` [PATCH v2 7/7] [media] coda: support YUYV output if VDOA is used Michael Tretter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161213185254.ztedtt3bpod2hbci@rob-hp-laptop \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hans.verkuil@cisco.com \
--cc=linux-media@vger.kernel.org \
--cc=m.tretter@pengutronix.de \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=philipp.zabel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox