[RESEND PATCHv3 1/2] regulator: fixed: dt: Allow an optional over current pin

[Axel Haslam <ahaslam-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>]

Add support for an optional over current input pin which
can be used to send an over current event to the regulator
consumer.

Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Axel Haslam <ahaslam-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 Documentation/devicetree/bindings/regulator/fixed-regulator.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
index 4fae41d..b145abb 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -11,6 +11,7 @@ If this property is missing, the default assumed is Active low.
 - gpio-open-drain: GPIO is open drain type.
   If this property is missing then default assumption is false.
 -vin-supply: Input supply name.
+- over-current-gpios: Input gpio that signal an over current condition.
 
 Any property defined as part of the core regulator
 binding, defined in regulator.txt, can also be used.
@@ -26,6 +27,7 @@ Example:
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		gpio = <&gpio1 16 0>;
+		over-current-gpios = <&gpio1 18 0>;
 		startup-delay-us = <70000>;
 		enable-active-high;
 		regulator-boot-on;
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html