Re: [PATCH net-next v4 2/2] net: stmmac: dwmac-meson8b: make the RGMII TX delay configurable

[David Miller <davem@davemloft.net>]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Sat, 17 Dec 2016 19:21:19 +0100

> Prior to this patch we were using a hardcoded RGMII TX clock delay of
> 2ns (= 1/4 cycle of the 125MHz RGMII TX clock). This value works for
> many boards, but unfortunately not for all (due to the way the actual
> circuit is designed, sometimes because the TX delay is enabled in the
> PHY, etc.). Making the TX delay on the MAC side configurable allows us
> to support all possible hardware combinations.
> 
> This allows fixing a compatibility issue on some boards, where the
> RTL8211F PHY is configured to generate the TX delay. We can now turn
> off the TX delay in the MAC, because otherwise we would be applying the
> delay twice (which results in non-working TX traffic).
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>

Is this really the safest thing to do?

If you say the existing hard-coded setting of 1/4 cycle works on most
boards, and what you're trying to do is override it with an OF
property value for boards where the existing setting does not work,
then you _must_ use a default value that corresponds to what the
existing code does not when you don't see this new OF property.

So please retain the current behavior of the 1/4 cycle TX delay
setting when you don't see the amlogic,tx-delay-ns property.

I really think you risk breaking existing boards by not doing so,
unless you can have this patch tested on every such board that exists
and I don't think you really can feasibly and rigorously do that.

Thanks.