From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH V5 2/8] Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding Date: Mon, 19 Dec 2016 16:28:46 -0600 Message-ID: <20161219222846.wkj2tshtxfnwqref@rob-hp-laptop> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-input-owner@vger.kernel.org To: Steve Twiss Cc: DEVICETREE , Eduardo Valentin , LINUX-KERNEL , LINUX-PM , Mark Rutland , Zhang Rui , Dmitry Torokhov , Guenter Roeck , LINUX-INPUT , LINUX-WATCHDOG , Lee Jones , Liam Girdwood , Lukasz Luba , Mark Brown , Support Opensource , Wim Van Sebroeck List-Id: devicetree@vger.kernel.org On Thu, Dec 15, 2016 at 07:08:39PM +0000, Steve Twiss wrote: > From: Steve Twiss > > Device tree binding information for DA9062 and DA9061 thermal junction > temperature monitor. > > Binding descriptions for the DA9061 and DA9062 thermal TJUNC supervisor > device driver, using a single THERMAL_TRIP_HOT trip-wire and allowing for > a configurable polling period for over-temperature polling. > > This patch also adds two examples, one for DA9062 and one for DA9061. The > DA9061 example uses a fall-back compatible string for the DA9062. > > Signed-off-by: Steve Twiss > > --- > This patch applies against linux-next and v4.9 > > v4 -> v5 > - Rebased from v4.8 to v4.9 > - Updates from comments by Eduardo Valentin > - Replace vendor defined dlg,tjunc-temp-polling-period-ms with standard > thermal core polling-delay-passive as part of the device tree > initialisation > - Remove Acked-by Rob Herring Acked-by: Rob Herring