From: Shawn Guo <shawnguo@kernel.org>
To: Jagan Teki <jagan@openedev.com>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Matteo Lisi <matteo.lisi@engicam.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
Jagan Teki <jagan@amarulasolutions.com>
Subject: Re: [PATCH 1/2] ARM: dts: imx6dl: Add Engicam i.CoreM6 DualLite/Solo RQS initial support
Date: Mon, 2 Jan 2017 17:23:05 +0800 [thread overview]
Message-ID: <20170102092304.GK20956@dragon> (raw)
In-Reply-To: <1482508935-9414-1-git-send-email-jagan@openedev.com>
On Fri, Dec 23, 2016 at 05:02:14PM +0100, Jagan Teki wrote:
> From: Jagan Teki <jagan@amarulasolutions.com>
>
> i.CoreM6 DualLite/Solo modules are system on module solutions manufactured
> by Engicam with following characteristics:
> CPU NXP i.MX6 DL, 800MHz
> RAM 1GB, 32, 64 bit, DDR3-800/1066
> NAND SLC,512MB
> Power supply Single 5V
> MAX LCD RES FULLHD
>
> and more info at
> http://www.engicam.com/en/products/embedded/som/standard/i-core-rqs-m6s-dl-d-q
>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Matteo Lisi <matteo.lisi@engicam.com>
> Cc: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx6dl-icore-rqs.dts | 51 ++++++++++++++++++++++++++++++++++
> 2 files changed, 52 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6dl-icore-rqs.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index cccdbcb..51f8dae 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -349,6 +349,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6dl-gw553x.dtb \
> imx6dl-hummingboard.dtb \
> imx6dl-icore.dtb \
> + imx6dl-icore-rqs.dtb \
> imx6dl-nit6xlite.dtb \
> imx6dl-nitrogen6x.dtb \
> imx6dl-phytec-pbab01.dtb \
> diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
> new file mode 100644
> index 0000000..5c19927
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
> @@ -0,0 +1,51 @@
> +/*
> + * Copyright (C) 2016 Amarula Solutions B.V.
> + * Copyright (C) 2016 Engicam S.r.l.
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
Please take a look at the following patch.
https://patchwork.kernel.org/patch/9475057/
Shawn
> +
> +/dts-v1/;
> +
> +#include "imx6q.dtsi"
> +#include "imx6qdl-icore-rqs.dtsi"
> +
> +/ {
> + model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
> + compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl";
> +};
> --
> 1.9.1
>
prev parent reply other threads:[~2017-01-02 9:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-23 16:02 [PATCH 1/2] ARM: dts: imx6dl: Add Engicam i.CoreM6 DualLite/Solo RQS initial support Jagan Teki
2016-12-23 16:02 ` [PATCH 2/2] ARM: dts: imx6q-icore-rqs: Update model to support Dual SOM Jagan Teki
2017-01-02 9:23 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170102092304.GK20956@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jagan@amarulasolutions.com \
--cc=jagan@openedev.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matteo.lisi@engicam.com \
--cc=michael@amarulasolutions.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).