From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: [PATCH 3/3] ARM: dts: omap5-igep0050: Allow bootloader to configure USB Ethernet MAC Date: Thu, 5 Jan 2017 08:37:03 -0800 Message-ID: <20170105163703.1982-4-tony@atomide.com> References: <20170105163703.1982-1-tony@atomide.com> Return-path: In-Reply-To: <20170105163703.1982-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Tony Lindgren Cc: =?UTF-8?q?Beno=C3=AEt=20Cousson?= , linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Laurent Pinchart List-Id: devicetree@vger.kernel.org This is slightly different wiring compared to omap5-uevm or pandaboard: /sys/bus/usb/devices/3-2 hub /sys/bus/usb/devices/3-2.3 7500 Cc: Laurent Pinchart Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-igep0050.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -19,6 +19,10 @@ reg = <0x0 0x80000000 0 0x7f000000>; /* 2032 MB */ }; + aliases { + ethernet = ðernet; + }; + gpio_keys { compatible = "gpio-keys"; pinctrl-0 = <&power_button_pin>; @@ -116,3 +120,20 @@ OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ >; }; + +&usbhsehci { + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@3 { + compatible = "usb424,7500"; + reg = <3>; + }; + }; +}; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html