From: Andrey Smirnov <andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Andrey Smirnov
<andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
yurovsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 1/2] ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate
Date: Tue, 10 Jan 2017 08:30:13 -0800 [thread overview]
Message-ID: <20170110163015.22444-1-andrew.smirnov@gmail.com> (raw)
ENABLE_LINREG bit is implemented by 3P0, 1P1 and 2P5 regulators on
i.MX6. This property is present in similar code in Fresscale BSP and
made its way upstream in imx6ul.dtsi, so this patch adds this property
to the rest of i.MX6 family for completness.
Cc: yurovsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Andrey Smirnov <andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/imx6qdl.dtsi | 3 +++
arch/arm/boot/dts/imx6sl.dtsi | 3 +++
arch/arm/boot/dts/imx6sx.dtsi | 3 +++
3 files changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 89b834f..9702e18 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -635,6 +635,7 @@
anatop-min-bit-val = <4>;
anatop-min-voltage = <800000>;
anatop-max-voltage = <1375000>;
+ anatop-enable-bit = <0>;
};
regulator-3p0 {
@@ -649,6 +650,7 @@
anatop-min-bit-val = <0>;
anatop-min-voltage = <2625000>;
anatop-max-voltage = <3400000>;
+ anatop-enable-bit = <0>;
};
regulator-2p5 {
@@ -663,6 +665,7 @@
anatop-min-bit-val = <0>;
anatop-min-voltage = <2000000>;
anatop-max-voltage = <2750000>;
+ anatop-enable-bit = <0>;
};
reg_arm: regulator-vddcore {
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 19cbd87..a478a06f 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -522,6 +522,7 @@
anatop-min-bit-val = <4>;
anatop-min-voltage = <800000>;
anatop-max-voltage = <1375000>;
+ anatop-enable-bit = <0>;
};
regulator-3p0 {
@@ -536,6 +537,7 @@
anatop-min-bit-val = <0>;
anatop-min-voltage = <2625000>;
anatop-max-voltage = <3400000>;
+ anatop-enable-bit = <0>;
};
regulator-2p5 {
@@ -550,6 +552,7 @@
anatop-min-bit-val = <0>;
anatop-min-voltage = <2100000>;
anatop-max-voltage = <2850000>;
+ anatop-enable-bit = <0>;
};
reg_arm: regulator-vddcore {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 10f3330..3de3cca 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -578,6 +578,7 @@
anatop-min-bit-val = <4>;
anatop-min-voltage = <800000>;
anatop-max-voltage = <1375000>;
+ anatop-enable-bit = <0>;
};
regulator-3p0 {
@@ -592,6 +593,7 @@
anatop-min-bit-val = <0>;
anatop-min-voltage = <2625000>;
anatop-max-voltage = <3400000>;
+ anatop-enable-bit = <0>;
};
regulator-2p5 {
@@ -606,6 +608,7 @@
anatop-min-bit-val = <0>;
anatop-min-voltage = <2100000>;
anatop-max-voltage = <2875000>;
+ anatop-enable-bit = <0>;
};
reg_arm: regulator-vddcore {
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-01-10 16:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-10 16:30 Andrey Smirnov [this message]
2017-01-10 16:30 ` [PATCH] regulator: anatop: Add support for "anatop-enable-bit" Andrey Smirnov
2017-01-13 17:07 ` Rob Herring
2017-01-13 17:17 ` Rob Herring
2017-01-24 18:39 ` Applied "regulator: anatop: Add support for "anatop-enable-bit"" to the regulator tree Mark Brown
[not found] ` <20170110163015.22444-1-andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-01-10 16:30 ` [PATCH 2/2] ARM: dts: imx7s: Adjust anatop-enable-bit for 'reg_1p0d' Andrey Smirnov
2017-01-10 17:28 ` [PATCH 1/2] ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate Fabio Estevam
2017-01-10 18:24 ` Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170110163015.22444-1-andrew.smirnov@gmail.com \
--to=andrew.smirnov-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=yurovsky-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).