Re: [PATCH 6/9] dt/bindings: Add a serial/UART attached device binding

[One Thousand Gnomes <gnomes-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org>]

On Fri,  6 Jan 2017 10:26:32 -0600
Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:

> Add a common binding for describing serial/UART attached devices. Common
> examples are Bluetooth, WiFi, NFC and GPS devices.
> 
> Serial attached devices are represented as child nodes of a UART node.
> This may need to be extended for more complex devices with multiple
> interfaces, but for the simple cases a child node is sufficient.
> 
> Signed-off-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
>  .../devicetree/bindings/serial/slave-device.txt    | 34 ++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/serial/slave-device.txt
> 
> diff --git a/Documentation/devicetree/bindings/serial/slave-device.txt b/Documentation/devicetree/bindings/serial/slave-device.txt
> new file mode 100644
> index 000000000000..9b7c2d651345
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/slave-device.txt
> @@ -0,0 +1,34 @@
> +Serial Slave Device DT binding
> +
> +This documents the binding structure and common properties for serial
> +attached devices. Common examples include Bluetooth, WiFi, NFC and GPS
> +devices.
> +
> +qSerial

Stray 'q' ??