[PATCH 0/5] add support for Allwinner V3s SoC

[PATCH 0/5] add support for Allwinner V3s SoC

[Icenowy Zheng]

Allwinner produced a single-core Cortex-A7 SoC, V3s, with integrated 64MiB DDR2
DRAM, and in LQFP package. With such a package, it has been easier for hackers
to DIY a board (no BGA needed, and no DRAM wiring needed).

Add support for this SoC, as well as one board with it (Lichee Pi Zero).

Icenowy Zheng (5):
  arm: sunxi: add support for V3s SoC
  clk: sunxi-ng: add support for V3s CCU
  pinctrl: sunxi: add driver for V3s SoC
  ARM: dts: sunxi: add dtsi file for V3s SoC
  ARM: dts: sunxi: add support for Lichee Pi Zero board

 Documentation/arm/sunxi/README                |   4 +
 arch/arm/boot/dts/Makefile                    |   3 +-
 arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts |  73 ++++
 arch/arm/boot/dts/sun8i-v3s.dtsi              | 257 +++++++++++
 arch/arm/mach-sunxi/sunxi.c                   |   1 +
 drivers/clk/sunxi-ng/Kconfig                  |  11 +
 drivers/clk/sunxi-ng/Makefile                 |   1 +
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c          | 590 ++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.h          |  63 +++
 drivers/pinctrl/sunxi/Kconfig                 |   4 +
 drivers/pinctrl/sunxi/Makefile                |   1 +
 drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c     | 321 ++++++++++++++
 include/dt-bindings/clock/sun8i-v3s-ccu.h     | 107 +++++
 include/dt-bindings/reset/sun8i-v3s-ccu.h     |  78 ++++
 14 files changed, 1513 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
 create mode 100644 arch/arm/boot/dts/sun8i-v3s.dtsi
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c
 create mode 100644 include/dt-bindings/clock/sun8i-v3s-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-v3s-ccu.h

-- 
2.11.0

[PATCH 1/5] arm: sunxi: add support for V3s SoC

[Icenowy Zheng]

Allwinner V3s is a low-end single-core Cortex-A7 SoC, with 64MB
integrated DRAM, and several peripherals.

Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
 Documentation/arm/sunxi/README | 4 ++++
 arch/arm/mach-sunxi/sunxi.c    | 1 +
 2 files changed, 5 insertions(+)

diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index cd0243302bc1..91ec8f2055be 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -67,6 +67,10 @@ SunXi family
         + Datasheet
           http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
 
+      - Allwinner V3s (sun8i)
+        + Datasheet
+          https://www.goprawn.com/forum/allwinner-cams/783-allwinner-v3s-soc-datasheet
+
     * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
       - Allwinner A80
         + Datasheet
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 2e2bde271205..f246bfc6cfe4 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -64,6 +64,7 @@ static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-a33",
 	"allwinner,sun8i-a83t",
 	"allwinner,sun8i-h3",
+	"allwinner,sun8i-v3s",
 	NULL,
 };
 
-- 
2.11.0

Re: [PATCH 1/5] arm: sunxi: add support for V3s SoC

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1098 bytes --]

On Tue, Jan 03, 2017 at 11:16:25PM +0800, Icenowy Zheng wrote:
> Allwinner V3s is a low-end single-core Cortex-A7 SoC, with 64MB
> integrated DRAM, and several peripherals.
> 
> Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
> ---
>  Documentation/arm/sunxi/README | 4 ++++
>  arch/arm/mach-sunxi/sunxi.c    | 1 +
>  2 files changed, 5 insertions(+)
> 
> diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
> index cd0243302bc1..91ec8f2055be 100644
> --- a/Documentation/arm/sunxi/README
> +++ b/Documentation/arm/sunxi/README
> @@ -67,6 +67,10 @@ SunXi family
>          + Datasheet
>            http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
>  
> +      - Allwinner V3s (sun8i)
> +        + Datasheet
> +          https://www.goprawn.com/forum/allwinner-cams/783-allwinner-v3s-soc-datasheet
> +

Please don't put random links in there, but at least something that we
know will be there in a couple of weeks/monthes/years

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Re: [PATCH 1/5] arm: sunxi: add support for V3s SoC

[Icenowy Zheng]

11.01.2017, 02:09, "Maxime Ripard" <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>:
> On Tue, Jan 03, 2017 at 11:16:25PM +0800, Icenowy Zheng wrote:
>>  Allwinner V3s is a low-end single-core Cortex-A7 SoC, with 64MB
>>  integrated DRAM, and several peripherals.
>>
>>  Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
>>  ---
>>   Documentation/arm/sunxi/README | 4 ++++
>>   arch/arm/mach-sunxi/sunxi.c | 1 +
>>   2 files changed, 5 insertions(+)
>>
>>  diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
>>  index cd0243302bc1..91ec8f2055be 100644
>>  --- a/Documentation/arm/sunxi/README
>>  +++ b/Documentation/arm/sunxi/README
>>  @@ -67,6 +67,10 @@ SunXi family
>>           + Datasheet
>>             http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
>>
>>  + - Allwinner V3s (sun8i)
>>  + + Datasheet
>>  + https://www.goprawn.com/forum/allwinner-cams/783-allwinner-v3s-soc-datasheet
>>  +
>
> Please don't put random links in there, but at least something that we
> know will be there in a couple of weeks/monthes/years

Is http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf acceptable?

>
> Thanks,
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

Re: [PATCH 1/5] arm: sunxi: add support for V3s SoC

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1860 bytes --]

1;4601;0c
On Thu, Jan 12, 2017 at 03:40:32AM +0800, Icenowy Zheng wrote:
> 
> 
> 11.01.2017, 02:09, "Maxime Ripard" <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>:
> > On Tue, Jan 03, 2017 at 11:16:25PM +0800, Icenowy Zheng wrote:
> >>  Allwinner V3s is a low-end single-core Cortex-A7 SoC, with 64MB
> >>  integrated DRAM, and several peripherals.
> >>
> >>  Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
> >>  ---
> >>   Documentation/arm/sunxi/README | 4 ++++
> >>   arch/arm/mach-sunxi/sunxi.c | 1 +
> >>   2 files changed, 5 insertions(+)
> >>
> >>  diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
> >>  index cd0243302bc1..91ec8f2055be 100644
> >>  --- a/Documentation/arm/sunxi/README
> >>  +++ b/Documentation/arm/sunxi/README
> >>  @@ -67,6 +67,10 @@ SunXi family
> >>           + Datasheet
> >>             http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
> >>
> >>  + - Allwinner V3s (sun8i)
> >>  + + Datasheet
> >>  + https://www.goprawn.com/forum/allwinner-cams/783-allwinner-v3s-soc-datasheet
> >>  +
> >
> > Please don't put random links in there, but at least something that we
> > know will be there in a couple of weeks/monthes/years
> 
> Is http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf acceptable?

It's much better, yes.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[PATCH 2/5] clk: sunxi-ng: add support for V3s CCU

[Icenowy Zheng]

V3s has a similar but cut-down CCU to H3.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
 drivers/clk/sunxi-ng/Kconfig              |  11 +
 drivers/clk/sunxi-ng/Makefile             |   1 +
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c      | 590 ++++++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.h      |  63 ++++
 include/dt-bindings/clock/sun8i-v3s-ccu.h | 107 ++++++
 include/dt-bindings/reset/sun8i-v3s-ccu.h |  78 ++++
 6 files changed, 850 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
 create mode 100644 include/dt-bindings/clock/sun8i-v3s-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-v3s-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 8454c6e3dd65..1ca48255802f 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -109,4 +109,15 @@ config SUN8I_H3_CCU
 	select SUNXI_CCU_PHASE
 	default MACH_SUN8I
 
+config SUN8I_V3S_CCU
+	bool "Support for the Allwinner V3s CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_NK
+	select SUNXI_CCU_NKM
+	select SUNXI_CCU_NKMP
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP
+	select SUNXI_CCU_PHASE
+	default MACH_SUN8I
+
 endif
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 24fbc6e5deb8..d1cd81a0f112 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
 obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
 obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
 obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o
+obj-$(CONFIG_SUN8I_V3S_CCU)	+= ccu-sun8i-v3s.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
new file mode 100644
index 000000000000..e569af9338c2
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -0,0 +1,590 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * Based on ccu-sun8i-h3.c, which is:
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun8i-v3s.h"
+
+static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpu_clk, "pll-cpu",
+				     "osc24M", 0x000,
+				     8, 5,	/* N */
+				     4, 2,	/* K */
+				     0, 2,	/* M */
+				     16, 2,	/* P */
+				     BIT(31),	/* gate */
+				     BIT(28),	/* lock */
+				     0);
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN8I_V3S_PLL_AUDIO_REG	0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+				   "osc24M", 0x008,
+				   8, 7,	/* N */
+				   0, 5,	/* M */
+				   BIT(31),	/* gate */
+				   BIT(28),	/* lock */
+				   0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
+					"osc24M", 0x0010,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+					"osc24M", 0x0018,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr_clk, "pll-ddr",
+				    "osc24M", 0x020,
+				    8, 5,	/* N */
+				    4, 2,	/* K */
+				    0, 2,	/* M */
+				    BIT(31),	/* gate */
+				    BIT(28),	/* lock */
+				    0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph0_clk, "pll-periph0",
+					   "osc24M", 0x028,
+					   8, 5,	/* N */
+					   4, 2,	/* K */
+					   BIT(31),	/* gate */
+					   BIT(28),	/* lock */
+					   2,		/* post-div */
+					   0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_isp_clk, "pll-isp",
+					"osc24M", 0x002c,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph1_clk, "pll-periph1",
+					   "osc24M", 0x044,
+					   8, 5,	/* N */
+					   4, 2,	/* K */
+					   BIT(31),	/* gate */
+					   BIT(28),	/* lock */
+					   2,		/* post-div */
+					   0);
+
+static const char * const cpu_parents[] = { "osc32k", "osc24M",
+					     "pll-cpu" , "pll-cpu" };
+static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
+		     0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+					     "axi" , "pll-periph0" };
+static struct ccu_div ahb1_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 12,
+		.width	= 2,
+
+		.variable_prediv	= {
+			.index	= 3,
+			.shift	= 6,
+			.width	= 2,
+		},
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb1",
+						      ahb1_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb1_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+			   0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+					     "pll-periph0" , "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
+static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
+	{ .index = 1, .div = 2 },
+};
+static struct ccu_mux ahb2_clk = {
+	.mux		= {
+		.shift	= 0,
+		.width	= 1,
+		.fixed_predivs	= ahb2_fixed_predivs,
+		.n_predivs	= ARRAY_SIZE(ahb2_fixed_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x05c,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb2",
+						      ahb2_parents,
+						      &ccu_mux_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_ce_clk,	"bus-ce",	"ahb1",
+		      0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk,	"bus-dma",	"ahb1",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk,	"bus-mmc0",	"ahb1",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk,	"bus-mmc1",	"ahb1",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk,	"bus-mmc2",	"ahb1",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_dram_clk,	"bus-dram",	"ahb1",
+		      0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk,	"bus-emac",	"ahb2",
+		      0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk,	"bus-hstimer",	"ahb1",
+		      0x060, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk,	"bus-spi0",	"ahb1",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_otg_clk,	"bus-otg",	"ahb1",
+		      0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk,	"bus-ehci0",	"ahb1",
+		      0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk,	"bus-ohci0",	"ahb1",
+		      0x060, BIT(29), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk,	"bus-ve",	"ahb1",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_tcon0_clk,	"bus-tcon0",	"ahb1",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_csi_clk,	"bus-csi",	"ahb1",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_de_clk,	"bus-de",	"ahb1",
+		      0x064, BIT(12), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk,	"bus-codec",	"apb1",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_pio_clk,	"bus-pio",	"apb1",
+		      0x068, BIT(5), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb2",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb2",
+		      0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb2",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb2",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb2",
+		      0x06c, BIT(18), 0);
+
+static SUNXI_CCU_GATE(bus_ephy_clk,	"bus-ephy",	"ahb1",
+		      0x070, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_dbg_clk,	"bus-dbg",	"ahb1",
+		      0x070, BIT(7), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
+						     "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+		       0x088, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+		       0x088, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+		       0x08c, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+		       0x08c, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+		       0x090, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+		       0x090, 8, 3, 0);
+
+static const char * const ce_parents[] = { "osc24M", "pll-periph0", };
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
+		      0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk,	"usb-ohci0",	"osc24M",
+		      0x0cc, BIT(16), 0);
+
+static const char * const dram_parents[] = { "pll-ddr", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
+			    0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"dram",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk,	"dram-csi",	"dram",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_ehci_clk,	"dram-ehci",	"dram",
+		      0x100, BIT(17), 0);
+static SUNXI_CCU_GATE(dram_ohci_clk,	"dram-ohci",	"dram",
+		      0x100, BIT(18), 0);
+
+static const char * const de_parents[] = { "pll-video", "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
+				 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
+				 0x118, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(csi_misc_clk,	"csi-misc",	"osc24M",
+		      0x130, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video",
+						 "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents,
+				 0x130, 0, 5, 8, 3, BIT(15), 0);
+
+static const char * const csi1_sclk_parents[] = { "pll-video", "pll-isp" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_sclk_clk, "csi-sclk", csi1_sclk_parents,
+				 0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi-mclk", csi_mclk_parents,
+				 0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+			     0x13c, 16, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ac_dig_clk,	"ac-dig",	"pll-audio",
+		      0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
+		      0x144, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", "pll-ddr" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+				 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
+
+static const char * const mipi_csi_parents[] = { "pll-video", "pll-periph0",
+						 "pll-isp" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mipi_csi_clk, "mipi-csi", mipi_csi_parents,
+			     0x16c, 0, 3, 24, 2, BIT(31), 0);
+
+static struct ccu_common *sun8i_v3s_ccu_clks[] = {
+	&pll_cpu_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video_clk.common,
+	&pll_ve_clk.common,
+	&pll_ddr_clk.common,
+	&pll_periph0_clk.common,
+	&pll_isp_clk.common,
+	&pll_periph1_clk.common,
+	&cpu_clk.common,
+	&axi_clk.common,
+	&ahb1_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&ahb2_clk.common,
+	&bus_ce_clk.common,
+	&bus_dma_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_dram_clk.common,
+	&bus_emac_clk.common,
+	&bus_hstimer_clk.common,
+	&bus_spi0_clk.common,
+	&bus_otg_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ve_clk.common,
+	&bus_tcon0_clk.common,
+	&bus_csi_clk.common,
+	&bus_de_clk.common,
+	&bus_codec_clk.common,
+	&bus_pio_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_ephy_clk.common,
+	&bus_dbg_clk.common,
+	&mmc0_clk.common,
+	&mmc0_sample_clk.common,
+	&mmc0_output_clk.common,
+	&mmc1_clk.common,
+	&mmc1_sample_clk.common,
+	&mmc1_output_clk.common,
+	&mmc2_clk.common,
+	&mmc2_sample_clk.common,
+	&mmc2_output_clk.common,
+	&ce_clk.common,
+	&spi0_clk.common,
+	&usb_phy0_clk.common,
+	&usb_ohci0_clk.common,
+	&dram_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi_clk.common,
+	&dram_ohci_clk.common,
+	&dram_ehci_clk.common,
+	&de_clk.common,
+	&tcon_clk.common,
+	&csi_misc_clk.common,
+	&csi0_mclk_clk.common,
+	&csi1_sclk_clk.common,
+	&csi1_mclk_clk.common,
+	&ve_clk.common,
+	&ac_dig_clk.common,
+	&avs_clk.common,
+	&mbus_clk.common,
+	&mipi_csi_clk.common,
+};
+
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+			"pll-periph0", 1, 2, 0);
+
+static struct clk_hw_onecell_data sun8i_v3s_hw_clks = {
+	.hws	= {
+		[CLK_PLL_CPU]		= &pll_cpu_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO]		= &pll_video_clk.common.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
+		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
+		[CLK_PLL_ISP]		= &pll_isp_clk.common.hw,
+		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AHB1]		= &ahb1_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_AHB2]		= &ahb2_clk.common.hw,
+		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_TCON0]		= &bus_tcon0_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_BUS_CODEC]		= &bus_codec_clk.common.hw,
+		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_EPHY]		= &bus_ephy_clk.common.hw,
+		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common.hw,
+		[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
+		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_CE]		= &ce_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_DRAM]		= &dram_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI]		= &dram_csi_clk.common.hw,
+		[CLK_DRAM_EHCI]		= &dram_ehci_clk.common.hw,
+		[CLK_DRAM_OHCI]		= &dram_ohci_clk.common.hw,
+		[CLK_DE]		= &de_clk.common.hw,
+		[CLK_TCON0]		= &tcon_clk.common.hw,
+		[CLK_CSI_MISC]		= &csi_misc_clk.common.hw,
+		[CLK_CSI0_MCLK]		= &csi0_mclk_clk.common.hw,
+		[CLK_CSI1_SCLK]		= &csi1_sclk_clk.common.hw,
+		[CLK_CSI1_MCLK]		= &csi1_mclk_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_AC_DIG]		= &ac_dig_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_MIPI_CSI]		= &mipi_csi_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
+	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
+
+	[RST_MBUS]		=  { 0x0fc, BIT(31) },
+
+	[RST_BUS_CE]		=  { 0x2c0, BIT(5) },
+	[RST_BUS_DMA]		=  { 0x2c0, BIT(6) },
+	[RST_BUS_MMC0]		=  { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		=  { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		=  { 0x2c0, BIT(10) },
+	[RST_BUS_DRAM]		=  { 0x2c0, BIT(14) },
+	[RST_BUS_EMAC]		=  { 0x2c0, BIT(17) },
+	[RST_BUS_HSTIMER]	=  { 0x2c0, BIT(19) },
+	[RST_BUS_SPI0]		=  { 0x2c0, BIT(20) },
+	[RST_BUS_OTG]		=  { 0x2c0, BIT(23) },
+	[RST_BUS_EHCI0]		=  { 0x2c0, BIT(26) },
+	[RST_BUS_OHCI0]		=  { 0x2c0, BIT(29) },
+
+	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
+	[RST_BUS_TCON0]		=  { 0x2c4, BIT(3) },
+	[RST_BUS_CSI]		=  { 0x2c4, BIT(8) },
+	[RST_BUS_DE]		=  { 0x2c4, BIT(12) },
+	[RST_BUS_DBG]		=  { 0x2c4, BIT(31) },
+
+	[RST_BUS_EPHY]		=  { 0x2c8, BIT(2) },
+
+	[RST_BUS_CODEC]		=  { 0x2d0, BIT(0) },
+
+	[RST_BUS_I2C0]		=  { 0x2d8, BIT(0) },
+	[RST_BUS_I2C1]		=  { 0x2d8, BIT(1) },
+	[RST_BUS_UART0]		=  { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		=  { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		=  { 0x2d8, BIT(18) },
+};
+
+static const struct sunxi_ccu_desc sun8i_v3s_ccu_desc = {
+	.ccu_clks	= sun8i_v3s_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_v3s_ccu_clks),
+
+	.hw_clks	= &sun8i_v3s_hw_clks,
+
+	.resets		= sun8i_v3s_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_v3s_ccu_resets),
+};
+
+static void __init sun8i_v3s_ccu_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n",
+		       of_node_full_name(node));
+		return;
+	}
+
+	/* Force the PLL-Audio-1x divider to 4 */
+	val = readl(reg + SUN8I_V3S_PLL_AUDIO_REG);
+	val &= ~GENMASK(19, 16);
+	writel(val | (3 << 16), reg + SUN8I_V3S_PLL_AUDIO_REG);
+
+	sunxi_ccu_probe(node, reg, &sun8i_v3s_ccu_desc);
+}
+CLK_OF_DECLARE(sun8i_v3s_ccu, "allwinner,sun8i-v3s-ccu",
+	       sun8i_v3s_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
new file mode 100644
index 000000000000..77fee2a4888e
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ * 
+ * Based on ccu-sun8i-h3.h, which is:
+ * Copyright (c) 2016 Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_H3_H_
+#define _CCU_SUN8I_H3_H_
+
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+#define CLK_PLL_CPU		0
+#define CLK_PLL_AUDIO_BASE	1
+#define CLK_PLL_AUDIO		2
+#define CLK_PLL_AUDIO_2X	3
+#define CLK_PLL_AUDIO_4X	4
+#define CLK_PLL_AUDIO_8X	5
+#define CLK_PLL_VIDEO		6
+#define CLK_PLL_VE		7
+#define CLK_PLL_DDR		8
+#define CLK_PLL_PERIPH0		9
+#define CLK_PLL_PERIPH0_2X	10
+#define CLK_PLL_ISP		11
+#define CLK_PLL_PERIPH1		12
+/* Reserve one number for not implemented and not used PLL_DDR1 */
+
+/* The CPU clock is exported */
+
+#define CLK_AXI			15
+#define CLK_AHB1		16
+#define CLK_APB1		17
+#define CLK_APB2		18
+#define CLK_AHB2		19
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+#define CLK_DRAM		58
+
+/* All the DRAM gates are exported */
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS		72
+
+/* And the GPU module clock is exported */
+
+#define CLK_NUMBER		(CLK_MIPI_CSI + 1)
+
+#endif /* _CCU_SUN8I_H3_H_ */
diff --git a/include/dt-bindings/clock/sun8i-v3s-ccu.h b/include/dt-bindings/clock/sun8i-v3s-ccu.h
new file mode 100644
index 000000000000..c0d5d5599c87
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-v3s-ccu.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * Based on sun8i-h3-ccu.h, which is:
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_V3S_H_
+#define _DT_BINDINGS_CLK_SUN8I_V3S_H_
+
+#define CLK_CPU			14
+
+#define CLK_BUS_CE		20
+#define CLK_BUS_DMA		21
+#define CLK_BUS_MMC0		22
+#define CLK_BUS_MMC1		23
+#define CLK_BUS_MMC2		24
+#define CLK_BUS_DRAM		25
+#define CLK_BUS_EMAC		26
+#define CLK_BUS_HSTIMER		27
+#define CLK_BUS_SPI0		28
+#define CLK_BUS_OTG		29
+#define CLK_BUS_EHCI0		30
+#define CLK_BUS_OHCI0		31
+#define CLK_BUS_VE		32
+#define CLK_BUS_TCON0		33
+#define CLK_BUS_CSI		34
+#define CLK_BUS_DE		35
+#define CLK_BUS_CODEC		36
+#define CLK_BUS_PIO		37
+#define CLK_BUS_I2C0		38
+#define CLK_BUS_I2C1		39
+#define CLK_BUS_UART0		40
+#define CLK_BUS_UART1		41
+#define CLK_BUS_UART2		42
+#define CLK_BUS_EPHY		43
+#define CLK_BUS_DBG		44
+
+#define CLK_MMC0		45
+#define CLK_MMC0_SAMPLE		46
+#define CLK_MMC0_OUTPUT		47
+#define CLK_MMC1		48
+#define CLK_MMC1_SAMPLE		49
+#define CLK_MMC1_OUTPUT		50
+#define CLK_MMC2		51
+#define CLK_MMC2_SAMPLE		52
+#define CLK_MMC2_OUTPUT		53
+#define CLK_CE			54
+#define CLK_SPI0		55
+#define CLK_USB_PHY0		56
+#define CLK_USB_OHCI0		57
+
+#define CLK_DRAM_VE		59
+#define CLK_DRAM_CSI		60
+#define CLK_DRAM_EHCI		61
+#define CLK_DRAM_OHCI		62
+#define CLK_DE			63
+#define CLK_TCON0		64
+#define CLK_CSI_MISC		65
+#define CLK_CSI0_MCLK		66
+#define CLK_CSI1_SCLK		67
+#define CLK_CSI1_MCLK		68
+#define CLK_VE			69
+#define CLK_AC_DIG		70
+#define CLK_AVS			71
+
+#define CLK_MIPI_CSI		73
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_V3S_H_ */
diff --git a/include/dt-bindings/reset/sun8i-v3s-ccu.h b/include/dt-bindings/reset/sun8i-v3s-ccu.h
new file mode 100644
index 000000000000..b58ef21a2e18
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-v3s-ccu.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * Based on sun8i-v3s-ccu.h, which is
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_V3S_H_
+#define _DT_BINDINGS_RST_SUN8I_V3S_H_
+
+#define RST_USB_PHY0		0
+
+#define RST_MBUS		1
+
+#define RST_BUS_CE		5
+#define RST_BUS_DMA		6
+#define RST_BUS_MMC0		7
+#define RST_BUS_MMC1		8
+#define RST_BUS_MMC2		9
+#define RST_BUS_DRAM		11
+#define RST_BUS_EMAC		12
+#define RST_BUS_HSTIMER		14
+#define RST_BUS_SPI0		15
+#define RST_BUS_OTG		17
+#define RST_BUS_EHCI0		18
+#define RST_BUS_OHCI0		22
+#define RST_BUS_VE		26
+#define RST_BUS_TCON0		27
+#define RST_BUS_CSI		30
+#define RST_BUS_DE		34
+#define RST_BUS_DBG		38
+#define RST_BUS_EPHY		39
+#define RST_BUS_CODEC		40
+#define RST_BUS_I2C0		46
+#define RST_BUS_I2C1		47
+#define RST_BUS_UART0		49
+#define RST_BUS_UART1		50
+#define RST_BUS_UART2		51
+
+#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */
-- 
2.11.0

Re: [PATCH 2/5] clk: sunxi-ng: add support for V3s CCU

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 437 bytes --]

On Tue, Jan 03, 2017 at 11:16:26PM +0800, Icenowy Zheng wrote:
> V3s has a similar but cut-down CCU to H3.
> 
> Add support for it.
> 
> Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>

It looks like there's nothing different but the clocks that you
register with the H3, please just use the H3 driver.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Re: [PATCH 2/5] clk: sunxi-ng: add support for V3s CCU

[Icenowy Zheng]

11.01.2017, 02:10, "Maxime Ripard" <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>:
> On Tue, Jan 03, 2017 at 11:16:26PM +0800, Icenowy Zheng wrote:
>>  V3s has a similar but cut-down CCU to H3.
>>
>>  Add support for it.
>>
>>  Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
>
> It looks like there's nothing different but the clocks that you
> register with the H3, please just use the H3 driver.

Nope.

It has a different PLL (PLL_ISP) at different address, and some
different muxes.

>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

Re: [PATCH 2/5] clk: sunxi-ng: add support for V3s CCU

[Icenowy Zheng]

12.01.2017, 03:40, "Icenowy Zheng" <icenowy-ymACFijhrKM@public.gmane.org>:
> 11.01.2017, 02:10, "Maxime Ripard" <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>:
>>  On Tue, Jan 03, 2017 at 11:16:26PM +0800, Icenowy Zheng wrote:
>>>   V3s has a similar but cut-down CCU to H3.
>>>
>>>   Add support for it.
>>>
>>>   Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
>>
>>  It looks like there's nothing different but the clocks that you
>>  register with the H3, please just use the H3 driver.
>
> Nope.
>
> It has a different PLL (PLL_ISP) at different address, and some
> different muxes.

Forgot to mention the missing of PLL_DE and related misses.

>
>>  Thanks!
>>  Maxime
>>
>>  --
>>  Maxime Ripard, Free Electrons
>>  Embedded Linux and Kernel engineering
>>  http://free-electrons.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

Re: [PATCH 2/5] clk: sunxi-ng: add support for V3s CCU

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1375 bytes --]

On Thu, Jan 12, 2017 at 03:44:53AM +0800, Icenowy Zheng wrote:
> 
> 
> 12.01.2017, 03:40, "Icenowy Zheng" <icenowy-ymACFijhrKM@public.gmane.org>:
> > 11.01.2017, 02:10, "Maxime Ripard" <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>:
> >>  On Tue, Jan 03, 2017 at 11:16:26PM +0800, Icenowy Zheng wrote:
> >>>   V3s has a similar but cut-down CCU to H3.
> >>>
> >>>   Add support for it.
> >>>
> >>>   Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
> >>
> >>  It looks like there's nothing different but the clocks that you
> >>  register with the H3, please just use the H3 driver.
> >
> > Nope.
> >
> > It has a different PLL (PLL_ISP) at different address, and some
> > different muxes.
> 
> Forgot to mention the missing of PLL_DE and related misses.

Those are not conflicting, it's just a slightly different set of
clocks.

So there's really nothing undoable.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[PATCH 3/5] pinctrl: sunxi: add driver for V3s SoC

[Icenowy Zheng]

V3s SoC features only a pin controller (for the lack of CPUs part).

Add a driver for this controller.

Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
 drivers/pinctrl/sunxi/Kconfig             |   4 +
 drivers/pinctrl/sunxi/Makefile            |   1 +
 drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c | 321 ++++++++++++++++++++++++++++++
 3 files changed, 326 insertions(+)
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c

diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index bff1ffc6f01e..3bd968cec28c 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -63,6 +63,10 @@ config PINCTRL_SUN8I_H3_R
 	def_bool MACH_SUN8I
 	select PINCTRL_SUNXI_COMMON
 
+config PINCTRL_SUN8I_V3S
+	def_bool MACH_SUN8I
+	select PINCTRL_SUNXI
+
 config PINCTRL_SUN9I_A80
 	def_bool MACH_SUN9I
 	select PINCTRL_SUNXI
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index 95f93d0561fc..9a955851f7f9 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -17,5 +17,6 @@ obj-$(CONFIG_PINCTRL_SUN50I_A64)	+= pinctrl-sun50i-a64.o
 obj-$(CONFIG_PINCTRL_SUN8I_A83T)	+= pinctrl-sun8i-a83t.o
 obj-$(CONFIG_PINCTRL_SUN8I_H3)		+= pinctrl-sun8i-h3.o
 obj-$(CONFIG_PINCTRL_SUN8I_H3_R)	+= pinctrl-sun8i-h3-r.o
+obj-$(CONFIG_PINCTRL_SUN8I_V3S)		+= pinctrl-sun8i-v3s.o
 obj-$(CONFIG_PINCTRL_SUN9I_A80)		+= pinctrl-sun9i-a80.o
 obj-$(CONFIG_PINCTRL_SUN9I_A80_R)	+= pinctrl-sun9i-a80-r.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c
new file mode 100644
index 000000000000..c86d3c42a905
--- /dev/null
+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c
@@ -0,0 +1,321 @@
+/*
+ * Allwinner V3s SoCs pinctrl driver.
+ *
+ * Copyright (C) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * Based on pinctrl-sun8i-h3.c, which is:
+ * Copyright (C) 2015 Jens Kuske <jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * Based on pinctrl-sun8i-a23.c, which is:
+ * Copyright (C) 2014 Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
+ * Copyright (C) 2014 Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-sunxi.h"
+
+static const struct sunxi_desc_pin sun8i_v3s_pins[] = {
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart2"),		/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)),	/* PB_EINT0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart2"),		/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)),	/* PB_EINT1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart2"),		/* RTS */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)),	/* PB_EINT2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "uart2"),		/* D1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)),	/* PB_EINT3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "pwm0"),
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)),	/* PB_EINT4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "pwm1"),
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)),	/* PB_EINT5 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c0"),		/* SCK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)),	/* PB_EINT6 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 7),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c0"),		/* SDA */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)),	/* PB_EINT7 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 8),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c1"),		/* SDA */
+		  SUNXI_FUNCTION(0x3, "uart0"),		/* TX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)),	/* PB_EINT8 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 9),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "i2c1"),		/* SCK */
+		  SUNXI_FUNCTION(0x3, "uart0"),		/* RX */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)),	/* PB_EINT9 */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc2"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* MISO */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc2"),		/* CMD */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc2"),		/* RST */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* CS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc2"),		/* D0 */
+		  SUNXI_FUNCTION(0x3, "spi0")),		/* MOSI */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* PCLK */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* CLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* MCLK */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* DE */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* HSYNC */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* HSYNC */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* VSYNC */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* VSYNC */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D0 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D1 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 7),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D5 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 8),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D4 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D6 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 9),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D5 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D7 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 10),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D6 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D10 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 11),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D7 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D11 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 12),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D8 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D12 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 13),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D9 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D13 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 14),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D10 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D14 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 15),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D11 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D15 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 16),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D12 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D18 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 17),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D13 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D19 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 18),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D14 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D20 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 19),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* D15 */
+		  SUNXI_FUNCTION(0x3, "lcd")),		/* D21 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 20),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* FIELD */
+		  SUNXI_FUNCTION(0x3, "csi_mipi")),	/* MCLK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 21),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* SCK */
+		  SUNXI_FUNCTION(0x3, "i2c1"),		/* SCK */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 22),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "csi"),		/* SDA */
+		  SUNXI_FUNCTION(0x3, "i2c1"),		/* SDA */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* RX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 23),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "lcd"),		/* D22 */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* RTS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 24),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x3, "lcd"),		/* D23 */
+		  SUNXI_FUNCTION(0x4, "uart1")),	/* CTS */
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D1 */
+		  SUNXI_FUNCTION(0x3, "jtag")),		/* MS */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D0 */
+		  SUNXI_FUNCTION(0x3, "jtag")),		/* DI */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* CLK */
+		  SUNXI_FUNCTION(0x3, "uart0")),	/* TX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* CMD */
+		  SUNXI_FUNCTION(0x3, "jtag")),		/* DO */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D3 */
+		  SUNXI_FUNCTION(0x3, "uart0")),	/* RX */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc0"),		/* D2 */
+		  SUNXI_FUNCTION(0x3, "jtag")),		/* CK */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(F, 6),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out")),
+	/* Hole */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 0),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* CLK */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 0)),	/* PG_EINT0 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 1),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* CMD */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 1)),	/* PG_EINT1 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 2),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* D0 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 2)),	/* PG_EINT2 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 3),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* D1 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 3)),	/* PG_EINT3 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 4),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* D2 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 4)),	/* PG_EINT4 */
+	SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 5),
+		  SUNXI_FUNCTION(0x0, "gpio_in"),
+		  SUNXI_FUNCTION(0x1, "gpio_out"),
+		  SUNXI_FUNCTION(0x2, "mmc1"),		/* D3 */
+		  SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 5)),	/* PG_EINT5 */
+};
+
+static const struct sunxi_pinctrl_desc sun8i_v3s_pinctrl_data = {
+	.pins = sun8i_v3s_pins,
+	.npins = ARRAY_SIZE(sun8i_v3s_pins),
+	.irq_banks = 2,
+	.irq_read_needs_mux = true
+};
+
+static int sun8i_v3s_pinctrl_probe(struct platform_device *pdev)
+{
+	return sunxi_pinctrl_init(pdev,
+				  &sun8i_v3s_pinctrl_data);
+}
+
+static const struct of_device_id sun8i_v3s_pinctrl_match[] = {
+	{ .compatible = "allwinner,sun8i-v3s-pinctrl", },
+	{}
+};
+
+static struct platform_driver sun8i_v3s_pinctrl_driver = {
+	.probe	= sun8i_v3s_pinctrl_probe,
+	.driver	= {
+		.name		= "sun8i-v3s-pinctrl",
+		.of_match_table	= sun8i_v3s_pinctrl_match,
+	},
+};
+builtin_platform_driver(sun8i_v3s_pinctrl_driver);
-- 
2.11.0

Re: [PATCH 3/5] pinctrl: sunxi: add driver for V3s SoC

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 450 bytes --]

On Tue, Jan 03, 2017 at 11:16:27PM +0800, Icenowy Zheng wrote:
> V3s SoC features only a pin controller (for the lack of CPUs part).
> 
> Add a driver for this controller.
> 
> Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>

Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Re: [PATCH 3/5] pinctrl: sunxi: add driver for V3s SoC

[Linus Walleij]

On Tue, Jan 3, 2017 at 4:16 PM, Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org> wrote:

> V3s SoC features only a pin controller (for the lack of CPUs part).
>
> Add a driver for this controller.
>
> Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>

Patch applied with Maxime's ACK.

Yours,
Linus Walleij

[PATCH 4/5] ARM: dts: sunxi: add dtsi file for V3s SoC

[Icenowy Zheng]

As we have the pinctrl and clock support for the V3s SoC, it's now to
run a mainline Linux on it.

So add a .dtsi file for it.

Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 257 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 257 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-v3s.dtsi

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
new file mode 100644
index 000000000000..084da7474afb
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -0,0 +1,257 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@01c20000 {
+			compatible = "allwinner,sun8i-v3s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@01c20400 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01c20400 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun8i-v3s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				pins = "PB8", "PB9";
+				function = "uart0";
+				bias-pull-up;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+};
-- 
2.11.0

Re: [PATCH 4/5] ARM: dts: sunxi: add dtsi file for V3s SoC

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 338 bytes --]

On Tue, Jan 03, 2017 at 11:16:28PM +0800, Icenowy Zheng wrote:
> +			uart0_pins_a: uart0@0 {
> +				pins = "PB8", "PB9";
> +				function = "uart0";
> +				bias-pull-up;

Why do you need a pullup here?

Looks good otherwise.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[PATCH 5/5] ARM: dts: sunxi: add support for Lichee Pi Zero board

[Icenowy Zheng]

Lichee Pi Zero is a small-sized V3s board, which is
breadboard-compatible, and with a MicroUSB port with both OTG function
and power function.

Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
---
 arch/arm/boot/dts/Makefile                    |  3 +-
 arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts | 73 +++++++++++++++++++++++++++
 2 files changed, 75 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cccdbcb557b6..3e099e9b1ad7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -853,7 +853,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h3-orangepi-pc-plus.dtb \
 	sun8i-h3-orangepi-plus.dtb \
 	sun8i-h3-orangepi-plus2e.dtb \
-	sun8i-r16-parrot.dtb
+	sun8i-r16-parrot.dtb \
+	sun8i-v3s-licheepi-zero.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
new file mode 100644
index 000000000000..0099affc6ce3
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Lichee Pi Zero";
+	compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-names = "default";
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
-- 
2.11.0

Re: [PATCH 2/5] clk: sunxi-ng: add support for V3s CCU

[Icenowy Zheng]

2017年1月13日 01:19于 Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>写道：
>
> On Thu, Jan 12, 2017 at 03:44:53AM +0800, Icenowy Zheng wrote: 
> > 
> > 
> > 12.01.2017, 03:40, "Icenowy Zheng" <icenowy-ymACFijhrKM@public.gmane.org>: 
> > > 11.01.2017, 02:10, "Maxime Ripard" <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>: 
> > >>  On Tue, Jan 03, 2017 at 11:16:26PM +0800, Icenowy Zheng wrote: 
> > >>>   V3s has a similar but cut-down CCU to H3. 
> > >>> 
> > >>>   Add support for it. 
> > >>> 
> > >>>   Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org> 
> > >> 
> > >>  It looks like there's nothing different but the clocks that you 
> > >>  register with the H3, please just use the H3 driver. 
> > > 
> > > Nope. 
> > > 
> > > It has a different PLL (PLL_ISP) at different address, and some 
> > > different muxes. 
> > 
> > Forgot to mention the missing of PLL_DE and related misses. 
>
> Those are not conflicting, it's just a slightly different set of 
> clocks. 

If saying so, we can have only one ccu driver, and make every ccu register different set ;-)

V3s itself is a totally different SoC with H3.

The relationship of V3s and H3 can be farther than the relationship of A33 and H3😃

>
> So there's really nothing undoable. 
>
> Maxime 
>
> -- 
> Maxime Ripard, Free Electrons 
> Embedded Linux and Kernel engineering 
> http://free-electrons.com 

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

Re: [PATCH 2/5] clk: sunxi-ng: add support for V3s CCU

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 2051 bytes --]

On Fri, Jan 13, 2017 at 01:31:41AM +0800, Icenowy Zheng wrote:
> 
> 2017年1月13日 01:19于 Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>写道：
> >
> > On Thu, Jan 12, 2017 at 03:44:53AM +0800, Icenowy Zheng wrote: 
> > > 
> > > 
> > > 12.01.2017, 03:40, "Icenowy Zheng" <icenowy-ymACFijhrKM@public.gmane.org>: 
> > > > 11.01.2017, 02:10, "Maxime Ripard" <maxime.ripard-wi1+55ScJUtKEb57/3fJTGGXanvQGlWp@public.gmane.orgm>: 
> > > >>  On Tue, Jan 03, 2017 at 11:16:26PM +0800, Icenowy Zheng wrote: 
> > > >>>   V3s has a similar but cut-down CCU to H3. 
> > > >>> 
> > > >>>   Add support for it. 
> > > >>> 
> > > >>>   Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org> 
> > > >> 
> > > >>  It looks like there's nothing different but the clocks that you 
> > > >>  register with the H3, please just use the H3 driver. 
> > > > 
> > > > Nope. 
> > > > 
> > > > It has a different PLL (PLL_ISP) at different address, and some 
> > > > different muxes. 
> > > 
> > > Forgot to mention the missing of PLL_DE and related misses. 
> >
> > Those are not conflicting, it's just a slightly different set of 
> > clocks. 
> 
> If saying so, we can have only one ccu driver, and make every ccu
> register different set ;-)
> 
> V3s itself is a totally different SoC with H3.
> 
> The relationship of V3s and H3 can be farther than the relationship
> of A33 and H3😃

A33 and H3 are an entirely different story. The H3 and A33 have
conflicting clocks (ie same clocks with different parameters). This is
not your case.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH 2/5] clk: sunxi-ng: add support for V3s CCU

[Icenowy Zheng]

13.01.2017, 01:41, "Maxime Ripard" <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>:
> On Fri, Jan 13, 2017 at 01:31:41AM +0800, Icenowy Zheng wrote:
>>  2017年1月13日 01:19于 Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>写道：
>>  >
>>  > On Thu, Jan 12, 2017 at 03:44:53AM +0800, Icenowy Zheng wrote:
>>  > >
>>  > >
>>  > > 12.01.2017, 03:40, "Icenowy Zheng" <icenowy-ymACFijhrKM@public.gmane.org>:
>>  > > > 11.01.2017, 02:10, "Maxime Ripard" <maxime.ripard@free-electrons.com>:
>>  > > >>  On Tue, Jan 03, 2017 at 11:16:26PM +0800, Icenowy Zheng wrote:
>>  > > >>>   V3s has a similar but cut-down CCU to H3.
>>  > > >>>
>>  > > >>>   Add support for it.
>>  > > >>>
>>  > > >>>   Signed-off-by: Icenowy Zheng <icenowy-ymACFijhrKM@public.gmane.org>
>>  > > >>
>>  > > >>  It looks like there's nothing different but the clocks that you
>>  > > >>  register with the H3, please just use the H3 driver.
>>  > > >
>>  > > > Nope.
>>  > > >
>>  > > > It has a different PLL (PLL_ISP) at different address, and some
>>  > > > different muxes.
>>  > >
>>  > > Forgot to mention the missing of PLL_DE and related misses.
>>  >
>>  > Those are not conflicting, it's just a slightly different set of
>>  > clocks.
>>
>>  If saying so, we can have only one ccu driver, and make every ccu
>>  register different set ;-)
>>
>>  V3s itself is a totally different SoC with H3.
>>
>>  The relationship of V3s and H3 can be farther than the relationship
>>  of A33 and H3😃
>
> A33 and H3 are an entirely different story. The H3 and A33 have
> conflicting clocks (ie same clocks with different parameters). This is
> not your case.

I think V3s and H3 has also conflicting clocks, e.g. CLK_DE.

The mux of CLK_DE in V3s is PLL_PERIPHx2 and PLL_VIDEO, but on H3
it's PLL_PERIPHx2 and PLL_DE (V3s lacks PLL_DE).

(What I say that there's a PLL missing means that there will also be mux
changes... I think you can understand this... sorry.)

>
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.