[PATCH v2 0/3] dmaengine: cppi41: Add dma support to da8xx

[PATCH v2 0/3] dmaengine: cppi41: Add dma support to da8xx

[Alexandre Bailon]

This series add support of DA8xx to CPPI 4.1 driver.
As the CPPI 4.1 is now generic, we only had to add the glue for DA8xx.

This serie should applied on top of 
"[PATCH v2 0/7] dmaengine: cppi41: Make CPPI 4.1 driver more generic".

Changes in v2:
- most of patches of v1 has been moved to the series
  "[PATCH v2 0/7] dmaengine: cppi41: Make CPPI 4.1 driver more generic".
- some patches of v1 has been removed because they were no required
  anymore because CPPI 4.1 driver has been made more generic.
- In v1, the driver were managing the clock for DA8xx paltform.
  This is not needed as CPPI 4.1 will be a child of MUSB DA8xx glue,
  we can use PM runtime and let the DA8xx glue driver manage it.

Alexandre Bailon (3):
  dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  dmaengine: cppi41: Implement the glue for DA8xx
  dmaengine: cppi41: Fix teardown warnings

 .../devicetree/bindings/usb/da8xx-usb.txt          | 42 ++++++++++++++++++++++
 drivers/dma/cppi41.c                               | 28 +++++++++++++--
 2 files changed, 68 insertions(+), 2 deletions(-)

-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller

[Alexandre Bailon]

DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx cppi41 dma controller.

Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 .../devicetree/bindings/usb/da8xx-usb.txt          | 42 ++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
index ccb844a..aed3169 100644
--- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -18,10 +18,26 @@ Required properties:
 
  - phy-names: Should be "usb-phy"
 
+ - dmas: specifies the dma channels
+
+ - dma-names: specifies the names of the channels. Use "rxN" for receive
+   and "txN" for transmit endpoints. N specifies the endpoint number.
+
 Optional properties:
 ~~~~~~~~~~~~~~~~~~~~
  - vbus-supply: Phandle to a regulator providing the USB bus power.
 
+DMA
+~~~
+- compatible: ti,da8xx-cppi41
+- reg: offset and length of the following register spaces: CPPI DMA Controller,
+  CPPI DMA Scheduler, Queue Manager
+- reg-names: "controller", "scheduler", "queuemgr"
+- #dma-cells: should be set to 2. The first number represents the
+  channel number (0 … 3 for endpoints 1 … 4).
+  The second number is 0 for RX and 1 for TX transfers.
+- #dma-channels: should be set to 4 representing the 4 endpoints.
+
 Example:
 	usb_phy: usb-phy {
 		compatible = "ti,da830-usb-phy";
@@ -31,6 +47,9 @@ Example:
 	usb0: usb@200000 {
 		compatible = "ti,da830-musb";
 		reg =   <0x00200000 0x10000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
 		interrupts = <58>;
 		interrupt-names = "mc";
 
@@ -39,5 +58,28 @@ Example:
 		phys = <&usb_phy 0>;
 		phy-names = "usb-phy";
 
+		dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+			&cppi41dma 2 0 &cppi41dma 3 0
+			&cppi41dma 0 1 &cppi41dma 1 1
+			&cppi41dma 2 1 &cppi41dma 3 1>;
+		dma-names =
+			"rx1", "rx2", "rx3", "rx4",
+			"tx1", "tx2", "tx3", "tx4";
+
 		status = "okay";
+
+		cppi41dma: dma-controller@201000 {
+			compatible = "ti,da8xx-cppi41";
+			reg =  <0x201000 0x1000
+				0x202000 0x1000
+				0x204000 0x4000>;
+			reg-names = "controller", "scheduler", "queuemgr";
+			interrupts = <58>;
+			interrupt-names = "glue";
+			#dma-cells = <2>;
+			#dma-channels = <4>;
+			#dma-requests = <256>;
+			status = "okay";
+		};
+
 	};
-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller

[Sergei Shtylyov]

On 01/17/2017 05:20 PM, Alexandre Bailon wrote:

> DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx cppi41 dma controller.

    "CPPI 4.1 DMA" again.

>
> Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> ---
>  .../devicetree/bindings/usb/da8xx-usb.txt          | 42 ++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
> index ccb844a..aed3169 100644
> --- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
> @@ -18,10 +18,26 @@ Required properties:
>
>   - phy-names: Should be "usb-phy"
>
> + - dmas: specifies the dma channels
> +
> + - dma-names: specifies the names of the channels. Use "rxN" for receive
> +   and "txN" for transmit endpoints. N specifies the endpoint number.
> +
>  Optional properties:
>  ~~~~~~~~~~~~~~~~~~~~
>   - vbus-supply: Phandle to a regulator providing the USB bus power.
>
> +DMA
> +~~~
> +- compatible: ti,da8xx-cppi41
> +- reg: offset and length of the following register spaces: CPPI DMA Controller,
> +  CPPI DMA Scheduler, Queue Manager
> +- reg-names: "controller", "scheduler", "queuemgr"
> +- #dma-cells: should be set to 2. The first number represents the
> +  channel number (0 … 3 for endpoints 1 … 4).
> +  The second number is 0 for RX and 1 for TX transfers.
> +- #dma-channels: should be set to 4 representing the 4 endpoints.

    Shouldn't the # of channels be a part of the glue data?

[...]
> @@ -39,5 +58,28 @@ Example:
>  		phys = <&usb_phy 0>;
>  		phy-names = "usb-phy";
>
> +		dmas = <&cppi41dma 0 0 &cppi41dma 1 0
> +			&cppi41dma 2 0 &cppi41dma 3 0
> +			&cppi41dma 0 1 &cppi41dma 1 1
> +			&cppi41dma 2 1 &cppi41dma 3 1>;
> +		dma-names =
> +			"rx1", "rx2", "rx3", "rx4",
> +			"tx1", "tx2", "tx3", "tx4";
> +
>  		status = "okay";
> +
> +		cppi41dma: dma-controller@201000 {
> +			compatible = "ti,da8xx-cppi41";
> +			reg =  <0x201000 0x1000
> +				0x202000 0x1000
> +				0x204000 0x4000>;
> +			reg-names = "controller", "scheduler", "queuemgr";
> +			interrupts = <58>;
> +			interrupt-names = "glue";
> +			#dma-cells = <2>;
> +			#dma-channels = <4>;
> +			#dma-requests = <256>;

    Not seeing this prop documented...

> +			status = "okay";

    Can be omitted.

> +		};
> +
>  	};
>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller

[Alexandre Bailon]

On 01/17/2017 06:14 PM, Sergei Shtylyov wrote:
> On 01/17/2017 05:20 PM, Alexandre Bailon wrote:
> 
>> DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx cppi41 dma controller.
> 
>    "CPPI 4.1 DMA" again.
> 
>>
>> Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
>> ---
>>  .../devicetree/bindings/usb/da8xx-usb.txt          | 42
>> ++++++++++++++++++++++
>>  1 file changed, 42 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>> b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>> index ccb844a..aed3169 100644
>> --- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>> +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>> @@ -18,10 +18,26 @@ Required properties:
>>
>>   - phy-names: Should be "usb-phy"
>>
>> + - dmas: specifies the dma channels
>> +
>> + - dma-names: specifies the names of the channels. Use "rxN" for receive
>> +   and "txN" for transmit endpoints. N specifies the endpoint number.
>> +
>>  Optional properties:
>>  ~~~~~~~~~~~~~~~~~~~~
>>   - vbus-supply: Phandle to a regulator providing the USB bus power.
>>
>> +DMA
>> +~~~
>> +- compatible: ti,da8xx-cppi41
>> +- reg: offset and length of the following register spaces: CPPI DMA
>> Controller,
>> +  CPPI DMA Scheduler, Queue Manager
>> +- reg-names: "controller", "scheduler", "queuemgr"
>> +- #dma-cells: should be set to 2. The first number represents the
>> +  channel number (0 … 3 for endpoints 1 … 4).
>> +  The second number is 0 for RX and 1 for TX transfers.
>> +- #dma-channels: should be set to 4 representing the 4 endpoints.
> 
>    Shouldn't the # of channels be a part of the glue data?
TBH I don't think know. For AM33xx, the number of channels is defined
so I did the same for DA850.
> 
> [...]
>> @@ -39,5 +58,28 @@ Example:
>>          phys = <&usb_phy 0>;
>>          phy-names = "usb-phy";
>>
>> +        dmas = <&cppi41dma 0 0 &cppi41dma 1 0
>> +            &cppi41dma 2 0 &cppi41dma 3 0
>> +            &cppi41dma 0 1 &cppi41dma 1 1
>> +            &cppi41dma 2 1 &cppi41dma 3 1>;
>> +        dma-names =
>> +            "rx1", "rx2", "rx3", "rx4",
>> +            "tx1", "tx2", "tx3", "tx4";
>> +
>>          status = "okay";
>> +
>> +        cppi41dma: dma-controller@201000 {
>> +            compatible = "ti,da8xx-cppi41";
>> +            reg =  <0x201000 0x1000
>> +                0x202000 0x1000
>> +                0x204000 0x4000>;
>> +            reg-names = "controller", "scheduler", "queuemgr";
>> +            interrupts = <58>;
>> +            interrupt-names = "glue";
>> +            #dma-cells = <2>;
>> +            #dma-channels = <4>;
>> +            #dma-requests = <256>;
> 
>    Not seeing this prop documented...
Right. Actually, this prop is not even used so I will just remove it.
> 
>> +            status = "okay";
> 
>    Can be omitted.
> 
>> +        };
>> +
>>      };
>>
> 
Best Regards,
Alexandre
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller

[Sergei Shtylyov]

On 01/17/2017 05:20 PM, Alexandre Bailon wrote:

> DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx cppi41 dma controller.
>
> Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> ---
>  .../devicetree/bindings/usb/da8xx-usb.txt          | 42 ++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
> index ccb844a..aed3169 100644
> --- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
> @@ -18,10 +18,26 @@ Required properties:
>
>   - phy-names: Should be "usb-phy"
>
> + - dmas: specifies the dma channels
> +
> + - dma-names: specifies the names of the channels. Use "rxN" for receive
> +   and "txN" for transmit endpoints. N specifies the endpoint number.
> +
>  Optional properties:
>  ~~~~~~~~~~~~~~~~~~~~
>   - vbus-supply: Phandle to a regulator providing the USB bus power.
>
> +DMA
> +~~~
> +- compatible: ti,da8xx-cppi41

    Almost missed this -- wildcards in this property are forbidden.
We should use "ti,da830-cppi41" as a least common denominator.

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller

[Sekhar Nori]

On Tuesday 17 January 2017 10:46 PM, Sergei Shtylyov wrote:
> On 01/17/2017 05:20 PM, Alexandre Bailon wrote:
> 
>> DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx cppi41 dma controller.
>>
>> Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
>> ---
>>  .../devicetree/bindings/usb/da8xx-usb.txt          | 42
>> ++++++++++++++++++++++
>>  1 file changed, 42 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>> b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>> index ccb844a..aed3169 100644
>> --- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>> +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>> @@ -18,10 +18,26 @@ Required properties:
>>
>>   - phy-names: Should be "usb-phy"
>>
>> + - dmas: specifies the dma channels
>> +
>> + - dma-names: specifies the names of the channels. Use "rxN" for receive
>> +   and "txN" for transmit endpoints. N specifies the endpoint number.
>> +
>>  Optional properties:
>>  ~~~~~~~~~~~~~~~~~~~~
>>   - vbus-supply: Phandle to a regulator providing the USB bus power.
>>
>> +DMA
>> +~~~
>> +- compatible: ti,da8xx-cppi41
> 
>    Almost missed this -- wildcards in this property are forbidden.
> We should use "ti,da830-cppi41" as a least common denominator.

Documentation/devicetree/bindings/submitting-patches.txt states:

"
  5) The wildcard "<chip>" may be used in compatible strings, as in
     the following example:

         - compatible: Must contain '"nvidia,<chip>-pcie",
           "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
"

I take this to mean that using wildcards to denote an SoC family on
which the same IP is present is okay to do. With that understanding, I
think using ti,da8xx-cppi41 is fine too. Although I have no objections
against using the more specific ti,da830-cppi41

Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller

[Sergei Shtylyov]

Hello!

On 1/18/2017 11:33 AM, Sekhar Nori wrote:

>>> DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx cppi41 dma controller.
>>>
>>> Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
>>> ---
>>>  .../devicetree/bindings/usb/da8xx-usb.txt          | 42
>>> ++++++++++++++++++++++
>>>  1 file changed, 42 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>>> b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>>> index ccb844a..aed3169 100644
>>> --- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>>> +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>>> @@ -18,10 +18,26 @@ Required properties:
>>>
>>>   - phy-names: Should be "usb-phy"
>>>
>>> + - dmas: specifies the dma channels
>>> +
>>> + - dma-names: specifies the names of the channels. Use "rxN" for receive
>>> +   and "txN" for transmit endpoints. N specifies the endpoint number.
>>> +
>>>  Optional properties:
>>>  ~~~~~~~~~~~~~~~~~~~~
>>>   - vbus-supply: Phandle to a regulator providing the USB bus power.
>>>
>>> +DMA
>>> +~~~
>>> +- compatible: ti,da8xx-cppi41
>>
>>    Almost missed this -- wildcards in this property are forbidden.
>> We should use "ti,da830-cppi41" as a least common denominator.
>
> Documentation/devicetree/bindings/submitting-patches.txt states:
>
> "
>   5) The wildcard "<chip>" may be used in compatible strings, as in
>      the following example:
>
>          - compatible: Must contain '"nvidia,<chip>-pcie",
>            "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
> "
>
> I take this to mean that using wildcards to denote an SoC family on
> which the same IP is present is okay to do.> With that understanding, I
> think using ti,da8xx-cppi41 is fine too.

    It doesn't really follow. I repeat, x's are not allowed.

[...]

> Thanks,
> Sekhar

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller

[Sekhar Nori]

Hi Rob,

On Wednesday 18 January 2017 03:00 PM, Sergei Shtylyov wrote:
> Hello!
> 
> On 1/18/2017 11:33 AM, Sekhar Nori wrote:
> 
>>>> DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx cppi41 dma
>>>> controller.
>>>>
>>>> Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
>>>> ---
>>>>  .../devicetree/bindings/usb/da8xx-usb.txt          | 42
>>>> ++++++++++++++++++++++
>>>>  1 file changed, 42 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>>>> b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>>>> index ccb844a..aed3169 100644
>>>> --- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>>>> +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>>>> @@ -18,10 +18,26 @@ Required properties:
>>>>
>>>>   - phy-names: Should be "usb-phy"
>>>>
>>>> + - dmas: specifies the dma channels
>>>> +
>>>> + - dma-names: specifies the names of the channels. Use "rxN" for
>>>> receive
>>>> +   and "txN" for transmit endpoints. N specifies the endpoint number.
>>>> +
>>>>  Optional properties:
>>>>  ~~~~~~~~~~~~~~~~~~~~
>>>>   - vbus-supply: Phandle to a regulator providing the USB bus power.
>>>>
>>>> +DMA
>>>> +~~~
>>>> +- compatible: ti,da8xx-cppi41
>>>
>>>    Almost missed this -- wildcards in this property are forbidden.
>>> We should use "ti,da830-cppi41" as a least common denominator.
>>
>> Documentation/devicetree/bindings/submitting-patches.txt states:
>>
>> "
>>   5) The wildcard "<chip>" may be used in compatible strings, as in
>>      the following example:
>>
>>          - compatible: Must contain '"nvidia,<chip>-pcie",
>>            "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
>> "
>>
>> I take this to mean that using wildcards to denote an SoC family on
>> which the same IP is present is okay to do.> With that understanding, I
>> think using ti,da8xx-cppi41 is fine too.
> 
>    It doesn't really follow. I repeat, x's are not allowed.

Can you clarify here? If x's are indeed not allowed, then I think the
document is being ambiguous about what constitutes "The wildcard "<chip>""

Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller

[Sergei Shtylyov]

On 1/18/2017 1:21 PM, Sekhar Nori wrote:

>>>>> DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx cppi41 dma
>>>>> controller.
>>>>>
>>>>> Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
>>>>> ---
>>>>>  .../devicetree/bindings/usb/da8xx-usb.txt          | 42
>>>>> ++++++++++++++++++++++
>>>>>  1 file changed, 42 insertions(+)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>>>>> b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>>>>> index ccb844a..aed3169 100644
>>>>> --- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>>>>> +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
>>>>> @@ -18,10 +18,26 @@ Required properties:
>>>>>
>>>>>   - phy-names: Should be "usb-phy"
>>>>>
>>>>> + - dmas: specifies the dma channels
>>>>> +
>>>>> + - dma-names: specifies the names of the channels. Use "rxN" for
>>>>> receive
>>>>> +   and "txN" for transmit endpoints. N specifies the endpoint number.
>>>>> +
>>>>>  Optional properties:
>>>>>  ~~~~~~~~~~~~~~~~~~~~
>>>>>   - vbus-supply: Phandle to a regulator providing the USB bus power.
>>>>>
>>>>> +DMA
>>>>> +~~~
>>>>> +- compatible: ti,da8xx-cppi41
>>>>
>>>>    Almost missed this -- wildcards in this property are forbidden.
>>>> We should use "ti,da830-cppi41" as a least common denominator.
>>>
>>> Documentation/devicetree/bindings/submitting-patches.txt states:
>>>
>>> "
>>>   5) The wildcard "<chip>" may be used in compatible strings, as in
>>>      the following example:
>>>
>>>          - compatible: Must contain '"nvidia,<chip>-pcie",
>>>            "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
>>> "
>>>
>>> I take this to mean that using wildcards to denote an SoC family on
>>> which the same IP is present is okay to do.> With that understanding, I
>>> think using ti,da8xx-cppi41 is fine too.
>>
>>    It doesn't really follow. I repeat, x's are not allowed.
>
> Can you clarify here? If x's are indeed not allowed,

    I have no idea where you got that they are allowed.

> then I think the
> document is being ambiguous about what constitutes "The wildcard "<chip>""

    There 's no ambiguity because the wildcard is the word "<chip>" itself, 
not anything other. Even if "<chip>" is used in the bindings, its possible 
values should be documented anyway.

> Thanks,
> Sekhar

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller

[Rob Herring]

On Wed, Jan 18, 2017 at 02:03:44PM +0530, Sekhar Nori wrote:
> On Tuesday 17 January 2017 10:46 PM, Sergei Shtylyov wrote:
> > On 01/17/2017 05:20 PM, Alexandre Bailon wrote:
> > 
> >> DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx cppi41 dma controller.
> >>
> >> Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> >> ---
> >>  .../devicetree/bindings/usb/da8xx-usb.txt          | 42
> >> ++++++++++++++++++++++
> >>  1 file changed, 42 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
> >> b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
> >> index ccb844a..aed3169 100644
> >> --- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
> >> +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
> >> @@ -18,10 +18,26 @@ Required properties:
> >>
> >>   - phy-names: Should be "usb-phy"
> >>
> >> + - dmas: specifies the dma channels
> >> +
> >> + - dma-names: specifies the names of the channels. Use "rxN" for receive
> >> +   and "txN" for transmit endpoints. N specifies the endpoint number.
> >> +
> >>  Optional properties:
> >>  ~~~~~~~~~~~~~~~~~~~~
> >>   - vbus-supply: Phandle to a regulator providing the USB bus power.
> >>
> >> +DMA
> >> +~~~
> >> +- compatible: ti,da8xx-cppi41
> > 
> >    Almost missed this -- wildcards in this property are forbidden.
> > We should use "ti,da830-cppi41" as a least common denominator.
> 
> Documentation/devicetree/bindings/submitting-patches.txt states:
> 
> "
>   5) The wildcard "<chip>" may be used in compatible strings, as in
>      the following example:
> 
>          - compatible: Must contain '"nvidia,<chip>-pcie",
>            "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
> "
> 
> I take this to mean that using wildcards to denote an SoC family on
> which the same IP is present is okay to do. With that understanding, I
> think using ti,da8xx-cppi41 is fine too. Although I have no objections
> against using the more specific ti,da830-cppi41

You may document things using the variable like above, but the end 
result of compatible strings should not have wildcards.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 2/3] dmaengine: cppi41: Implement the glue for DA8xx

[Alexandre Bailon]

The DA8xx has a CPPI 4.1 DMA controller.
This is add the glue layer required to make it work on DA8xx.

Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 drivers/dma/cppi41.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
index 0bc4f1a..aab1e5a 100644
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/cppi41.c
@@ -221,6 +221,20 @@ static const struct chan_queues am335x_usb_queues_rx[] = {
 	[29] = { .submit = 30, .complete = 155},
 };
 
+static const struct chan_queues da8xx_usb_queues_tx[] = {
+	[0] = { .submit =  16, .complete = 24},
+	[1] = { .submit =  18, .complete = 24},
+	[2] = { .submit =  20, .complete = 24},
+	[3] = { .submit =  22, .complete = 24},
+};
+
+static const struct chan_queues da8xx_usb_queues_rx[] = {
+	[0] = { .submit =  1, .complete = 26},
+	[1] = { .submit =  3, .complete = 26},
+	[2] = { .submit =  5, .complete = 26},
+	[3] = { .submit =  7, .complete = 26},
+};
+
 struct cppi_glue_infos {
 	irqreturn_t (*isr)(int irq, void *data);
 	const struct chan_queues *queues_rx;
@@ -962,8 +976,18 @@ static const struct cppi_glue_infos am335x_usb_infos = {
 	.qmgr_num_pend = 5,
 };
 
+static const struct cppi_glue_infos da8xx_usb_infos = {
+	.isr = cppi41_irq,
+	.queues_rx = da8xx_usb_queues_rx,
+	.queues_tx = da8xx_usb_queues_tx,
+	.td_queue = { .submit = 31, .complete = 0 },
+	.first_completion_queue = 24,
+	.qmgr_num_pend = 2,
+};
+
 static const struct of_device_id cppi41_dma_ids[] = {
 	{ .compatible = "ti,am3359-cppi41", .data = &am335x_usb_infos},
+	{ .compatible = "ti,da8xx-cppi41", .data = &da8xx_usb_infos},
 	{},
 };
 MODULE_DEVICE_TABLE(of, cppi41_dma_ids);
-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/3] dmaengine: cppi41: Fix teardown warnings

[Alexandre Bailon]

During the teardown of a RX channel, because there is only one
completion queue available for RX channel, descriptor of another
channel may be popped which will cause 2 warnings:
- the first one because we popped a wrong descriptor
  (neither the channel's descriptor, nor the teardown descriptor).
- the second one happen during the teardown of another channel,
  because we can't find the channel descriptor
  (that is, the one that caused the first warning).
To avoid that, use one free queue instead of a transmit completion queue.

Note that fix doesn't fix all the teardown warnings:
I still get some when I run some corner case.

Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 drivers/dma/cppi41.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
index aab1e5a..aba741c 100644
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/cppi41.c
@@ -630,7 +630,7 @@ static int cppi41_tear_down_chan(struct cppi41_channel *c)
 		if (!c->is_tx) {
 			reg |= GCR_STARV_RETRY;
 			reg |= GCR_DESC_TYPE_HOST;
-			reg |= c->q_comp_num;
+			reg |= cdd->td_queue.complete;
 		}
 		reg |= GCR_TEARDOWN;
 		cppi_writel(reg, c->gcr_reg);
@@ -641,7 +641,7 @@ static int cppi41_tear_down_chan(struct cppi41_channel *c)
 	if (!c->td_seen || !c->td_desc_seen) {
 
 		desc_phys = cppi41_pop_desc(cdd, cdd->td_queue.complete);
-		if (!desc_phys)
+		if (!desc_phys && c->is_tx)
 			desc_phys = cppi41_pop_desc(cdd, c->q_comp_num);
 
 		if (desc_phys == c->desc_phys) {
-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html