devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bruno Herrera <bruherrera@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
	mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
	johnyoun@synopsys.com, felipe.balbi@linux.intel.com
Cc: devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/5] ARM: dts: stm32: Add USB FS support for STM32F429 MCU
Date: Tue, 17 Jan 2017 14:12:34 -0200	[thread overview]
Message-ID: <20170117161237.3802-3-bruherrera@gmail.com> (raw)
In-Reply-To: <20170117161237.3802-1-bruherrera@gmail.com>

This patch adds the USB pins and nodes for USB FS core. 

Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index e4dae0e..26f2395 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -316,6 +316,28 @@
 				};
 			};
 
+			usbotg_fs_pins_a: usbotg_fs@0 {
+				pins {
+					pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
+						 <STM32F429_PA11_FUNC_OTG_FS_DM>,
+						 <STM32F429_PA12_FUNC_OTG_FS_DP>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_fs_pins_b: usbotg_fs@1 {
+				pins {
+					pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
+						 <STM32F429_PB14_FUNC_OTG_HS_DM>,
+						 <STM32F429_PB15_FUNC_OTG_HS_DP>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
 			usbotg_hs_pins_a: usbotg_hs@0 {
 				pins {
 					pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
@@ -420,6 +442,15 @@
 			status = "disabled";
 		};
 
+		usbotg_fs: usb@50000000 {
+			compatible = "st,stm32f4xx-fsotg";
+			reg = <0x50000000 0x40000>;
+			interrupts = <67>;
+			clocks = <&rcc 0 39>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
 		rng: rng@50060800 {
 			compatible = "st,stm32-rng";
 			reg = <0x50060800 0x400>;
-- 
2.10.1 (Apple Git-78)

  parent reply	other threads:[~2017-01-17 16:12 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-17 16:12 [PATCH v3 0/5] usb: dwc2: Add support for USB OTG on STM32F4x9 Bruno Herrera
2017-01-17 16:12 ` [PATCH v3 1/5] usb: dwc2: Add support for STM32F429/439/469 USB OTG HS/FS in FS mode (internal PHY) Bruno Herrera
2017-01-19 23:12   ` John Youn
2017-01-17 16:12 ` Bruno Herrera [this message]
2017-01-17 16:12 ` [PATCH v3 3/5] ARM: dts: stm32: Enable USB FS on stm32f469-disco Bruno Herrera
2017-01-17 16:12 ` [PATCH v3 4/5] ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco Bruno Herrera
     [not found] ` <20170117161237.3802-1-bruherrera-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-01-17 16:12   ` [PATCH v3 5/5] dt-bindings: Document the STM32 USB OTG DWC2 core binding Bruno Herrera
     [not found]     ` <20170117161237.3802-6-bruherrera-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-01-19 19:24       ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170117161237.3802-3-bruherrera@gmail.com \
    --to=bruherrera@gmail.com \
    --cc=alexandre.torgue@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=felipe.balbi@linux.intel.com \
    --cc=johnyoun@synopsys.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).