From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: [PATCH v3 6/8] ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding Date: Tue, 17 Jan 2017 10:22:22 -0800 Message-ID: <20170117182224.32212-7-f.fainelli@gmail.com> References: <20170117182224.32212-1-f.fainelli@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20170117182224.32212-1-f.fainelli@gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland , Andrew Lunn , Florian Fainelli , Jason Cooper , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , vivien.didelot@savoirfairelinux.com, Russell King , open list , Rob Herring , Gregory Clement , Sebastian Hesselbarth List-Id: devicetree@vger.kernel.org Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: dsa: Document new binding"). The legacy binding node is kept included, but is marked disabled. Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/kirkwood-linksys-viper.dts | 49 ++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts index 345fcac48dc7..df7851820507 100644 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -70,6 +70,8 @@ }; dsa { + status = "disabled"; + compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -207,6 +209,53 @@ &mdio { status = "okay"; + + switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <16>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "ethernet1"; + }; + + port@1 { + reg = <1>; + label = "ethernet2"; + }; + + port@2 { + reg = <2>; + label = "ethernet3"; + }; + + port@3 { + reg = <3>; + label = "ethernet4"; + }; + + port@4 { + reg = <4>; + label = "internet"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; &uart0 { -- 2.9.3