From: Michael Tretter <m.tretter@pengutronix.de>
To: linux-media@vger.kernel.org
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
devicetree@vger.kernel.org, Hans Verkuil <hans.verkuil@cisco.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
kernel@pengutronix.de, Michael Tretter <m.tretter@pengutronix.de>
Subject: [PATCH v4 0/7] Add support for Video Data Order Adapter
Date: Fri, 20 Jan 2017 15:00:18 +0100 [thread overview]
Message-ID: <20170120140025.3338-1-m.tretter@pengutronix.de> (raw)
Hello,
This is v4 of a patch series that adds support for the Video Data Order
Adapter (VDOA) that can be found on Freescale i.MX6. It converts the
macroblock tiled format produced by the CODA 960 video decoder to a
raster-ordered format for scanout.
Changes since v3:
- Patch 2/7: Add my copyright to vdoa copyright header
- Patch 2/7: Fix offset of chroma plane to be page-aligned
- Patch 6/7: Fix oops when releasing the coda driver by destroying vdoa
context after removing all buffers
- Patch 6/7: Fix missing vdoa disable when switching from tiled to linear
format
Changes since v2:
- Patch 1/7: Update commit message to include binding change; fix
spelling/style in binding documentation
Changes since v1:
- Dropped patch 8/9 of v1
- Patch 1/7: Add devicetree binding documentation for fsl-vdoa
- Patch 6/7: I merged patch 5/9 and patch 8/9 of v1 into a single patch
- Patch 6/7: Use dt compatible instead of a phandle to find VDOA device
- Patch 6/7: Always check VDOA availability even if disabled via module
parameter and do not print a message if VDOA cannot be found
- Patch 6/7: Do not change the CODA context in coda_try_fmt()
- Patch 6/7: Allocate an additional internal frame if the VDOA is in use
Michael Tretter (3):
[media] coda: fix frame index to returned error
[media] coda: use VDOA for un-tiling custom macroblock format
[media] coda: support YUYV output if VDOA is used
Philipp Zabel (4):
[media] dt-bindings: Add a binding for Video Data Order Adapter
[media] coda: add i.MX6 VDOA driver
[media] coda: correctly set capture compose rectangle
[media] coda: add debug output about tiling
.../devicetree/bindings/media/fsl-vdoa.txt | 21 ++
arch/arm/boot/dts/imx6qdl.dtsi | 2 +
drivers/media/platform/Kconfig | 3 +
drivers/media/platform/coda/Makefile | 1 +
drivers/media/platform/coda/coda-bit.c | 93 ++++--
drivers/media/platform/coda/coda-common.c | 175 ++++++++++-
drivers/media/platform/coda/coda.h | 3 +
drivers/media/platform/coda/imx-vdoa.c | 338 +++++++++++++++++++++
drivers/media/platform/coda/imx-vdoa.h | 58 ++++
9 files changed, 652 insertions(+), 42 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/fsl-vdoa.txt
create mode 100644 drivers/media/platform/coda/imx-vdoa.c
create mode 100644 drivers/media/platform/coda/imx-vdoa.h
--
2.11.0
next reply other threads:[~2017-01-20 14:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-20 14:00 Michael Tretter [this message]
2017-01-20 14:00 ` [PATCH v4 2/7] [media] coda: add i.MX6 VDOA driver Michael Tretter
[not found] ` <20170120140025.3338-1-m.tretter-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-01-20 14:00 ` [PATCH v4 1/7] [media] dt-bindings: Add a binding for Video Data Order Adapter Michael Tretter
2017-01-20 14:00 ` [PATCH v4 3/7] [media] coda: correctly set capture compose rectangle Michael Tretter
2017-01-20 14:00 ` [PATCH v4 5/7] [media] coda: fix frame index to returned error Michael Tretter
2017-01-20 14:00 ` [PATCH v4 6/7] [media] coda: use VDOA for un-tiling custom macroblock format Michael Tretter
2017-01-20 14:00 ` [PATCH v4 4/7] [media] coda: add debug output about tiling Michael Tretter
2017-01-20 14:00 ` [PATCH v4 7/7] [media] coda: support YUYV output if VDOA is used Michael Tretter
2017-01-20 14:54 ` [PATCH v4 0/7] Add support for Video Data Order Adapter Hans Verkuil
2017-01-20 15:44 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170120140025.3338-1-m.tretter@pengutronix.de \
--to=m.tretter@pengutronix.de \
--cc=devicetree@vger.kernel.org \
--cc=hans.verkuil@cisco.com \
--cc=kernel@pengutronix.de \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).