From mboxrd@z Thu Jan 1 00:00:00 1970 From: Romain Perier Subject: [PATCH v2 3/3] arm: dts: Add support for ES8323 to the Firefly-RK3288 Date: Mon, 23 Jan 2017 14:47:47 +0100 Message-ID: <20170123134747.1385-4-romain.perier@collabora.com> References: <20170123134747.1385-1-romain.perier@collabora.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20170123134747.1385-1-romain.perier@collabora.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Heiko Stuebner , devicetree@vger.kernel.org, Rob Herring , Ian Campbell , Pawel Moll , Mark Rutland , Kumar Gala , Jaroslav Kysela , Takashi Iwai , alsa-devel@alsa-project.org Cc: Romain Perier , linux-rockchip@lists.infradead.org, Sjoerd Simons , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org This commit adds the DT definition of the es8323 i2c device found at address 0x10. It also adds the definition for connecting the Rockchip I2S to the es8323 analog output. Signed-off-by: Romain Perier --- Changes in v2: - Add the pinctrl headphone, that was previously in conflict with otp pins - Renamed sound_es8323 to sound_i2s - Added the property rockchip,routing arch/arm/boot/dts/rk3288-firefly.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 44935af..ddb0beb 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -103,6 +103,19 @@ }; }; + sound_i2s { + compatible = "rockchip,rk3288-hdmi-analog"; + rockchip,model = "I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&es8323>; + rockchip,routing = "Analog", "LOUT2", + "Analog", "ROUT2"; + rockchip,hp-en-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>; + rockchip,hp-det-gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&headphone>; + }; + vbat_wl: vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -371,6 +384,17 @@ &i2c2 { status = "okay"; + + es8323: es8323@10 { + compatible = "everest,es8323", "everest,es8328"; + reg = <0x10>; + AVDD-supply = <&vcca_33>; + DVDD-supply = <&vcca_33>; + HPVDD-supply = <&vcca_33>; + PVDD-supply = <&vcca_33>; + clocks = <&cru SCLK_I2S0_OUT>; + clock-names = "i2s_clk_out"; + }; }; &i2c4 { @@ -381,6 +405,10 @@ status = "okay"; }; +&i2s { + status = "okay"; +}; + &io_domains { status = "okay"; @@ -483,6 +511,12 @@ }; }; + sound { + headphone: headphone { + rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + usb_host { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; -- 2.9.3