[PATCH 2/2] ARM: dts: qcom: Add msm8974 CoreSight components

[Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

From: "Ivan T. Ivanov" <ivan.ivanov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Add initial set of CoreSight components found on Qualcomm
msm8974 and apq8074 based platforms, including the APQ8074
Dragonboard board.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Georgi Djakov <georgi.djakov-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 280 +++++++++++++++++++++++++++++++++++-
 1 file changed, 276 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 4b4c61e2ee35..ab766a36a461 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -68,7 +68,7 @@
 		#size-cells = <0>;
 		interrupts = <1 9 0xf04>;
 
-		cpu@0 {
+		CPU0: cpu@0 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v2";
 			device_type = "cpu";
@@ -79,7 +79,7 @@
 			cpu-idle-states = <&CPU_SPC>;
 		};
 
-		cpu@1 {
+		CPU1: cpu@1 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v2";
 			device_type = "cpu";
@@ -90,7 +90,7 @@
 			cpu-idle-states = <&CPU_SPC>;
 		};
 
-		cpu@2 {
+		CPU2: cpu@2 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v2";
 			device_type = "cpu";
@@ -101,7 +101,7 @@
 			cpu-idle-states = <&CPU_SPC>;
 		};
 
-		cpu@3 {
+		CPU3: cpu@3 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v2";
 			device_type = "cpu";
@@ -733,6 +733,278 @@
 
 			status = "disabled";
 		};
+
+		etr@fc322000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0xfc322000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			port {
+				etr_in: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out0>;
+				};
+			};
+		};
+
+		tpiu@fc318000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0xfc318000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			port {
+				tpiu_in: endpoint {
+					 slave-mode;
+					 remote-endpoint = <&replicator_out1>;
+				 };
+			};
+		};
+
+		replicator@fc31c000 {
+			compatible = "qcom,coresight-replicator1x", "arm,primecell";
+			reg = <0xfc31c000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+				port@2 {
+					reg = <0>;
+					replicator_in: endpoint {
+						slave-mode;
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf@fc307000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0xfc307000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+				port@1 {
+					reg = <0>;
+					etf_in: endpoint {
+						slave-mode;
+						remote-endpoint = <&merger_out>;
+					};
+				};
+			};
+		};
+
+		funnel@fc31b000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0xfc31b000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 0 - connected trought funnel to Audio, Modem and
+				 *     Resource and Power Manager CPU's
+				 * 2...7 - not-connected
+				 */
+				port@1 {
+					reg = <1>;
+					merger_in1: endpoint {
+						slave-mode;
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+				port@8 {
+					reg = <0>;
+					merger_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+		};
+
+		funnel@fc31a000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0xfc31a000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 0 - not-connected
+				 * 1 - connected trought funnel to Multimedia CPU
+				 * 2 - connected to Wireless CPU
+				 * 3 - not-connected
+				 * 4 - not-connected
+				 * 6 - not-connected
+				 * 7 - connected to STM
+				 */
+				port@5 {
+					reg = <5>;
+					funnel1_in5: endpoint {
+						slave-mode;
+						remote-endpoint = <&kpss_out>;
+					};
+				};
+				port@8 {
+					reg = <0>;
+					funnel1_out: endpoint {
+						remote-endpoint = <&merger_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0xfc345000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					kpss_in0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					kpss_in1: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					kpss_in2: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@3 {
+					reg = <3>;
+					kpss_in3: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+				port@8 {
+					reg = <0>;
+					kpss_out: endpoint {
+						remote-endpoint = <&funnel1_in5>;
+					};
+				};
+			};
+		};
+
+		etm@fc33c000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33c000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU0>;
+
+			port {
+				etm0_out: endpoint {
+					remote-endpoint = <&kpss_in0>;
+				};
+			};
+		};
+
+		etm@fc33d000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33d000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU1>;
+
+			port {
+				etm1_out: endpoint {
+					remote-endpoint = <&kpss_in1>;
+				};
+			};
+		};
+
+		etm@fc33e000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33e000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU2>;
+
+			port {
+				etm2_out: endpoint {
+					remote-endpoint = <&kpss_in2>;
+				};
+			};
+		};
+
+		etm@fc33f000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33f000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU3>;
+
+			port {
+				etm3_out: endpoint {
+					remote-endpoint = <&kpss_in3>;
+				};
+			};
+		};
 	};
 
 	smd {
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html