Re: [PATCH v3 13/24] platform: add video-multiplexer subdevice driver

[Benoit Parrot <bparrot@ti.com>]

Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote on Tue [2017-Feb-07 12:26:32 +0200]:
> Hi Steve,
> 
> On Monday 06 Feb 2017 15:10:46 Steve Longerbeam wrote:
> > On 02/06/2017 02:33 PM, Laurent Pinchart wrote:
> > > On Monday 06 Feb 2017 10:50:22 Hans Verkuil wrote:
> > >> On 02/05/2017 04:48 PM, Laurent Pinchart wrote:
> > >>> On Tuesday 24 Jan 2017 18:07:55 Steve Longerbeam wrote:
> > >>>> On 01/24/2017 04:02 AM, Philipp Zabel wrote:
> > >>>>> On Fri, 2017-01-20 at 15:03 +0100, Hans Verkuil wrote:
> > >>>>>>> +
> > >>>>>>> +int vidsw_g_mbus_config(struct v4l2_subdev *sd, struct
> > >>>>>>> v4l2_mbus_config *cfg)
> 
> [snip]
> 
> > >>>>>> I am not certain this op is needed at all. In the current kernel this
> > >>>>>> op is only used by soc_camera, pxa_camera and omap3isp (somewhat
> > >>>>>> dubious). Normally this information should come from the device tree
> > >>>>>> and there should be no need for this op.
> > >>>>>> 
> > >>>>>> My (tentative) long-term plan was to get rid of this op.
> > >>>>>> 
> > >>>>>> If you don't need it, then I recommend it is removed.
> > >>>> 
> > >>>> Hi Hans, the imx-media driver was only calling g_mbus_config to the
> > >>>> camera sensor, and it was doing that to determine the sensor's bus
> > >>>> type. This info was already available from parsing a v4l2_of_endpoint
> > >>>> from the sensor node. So it was simple to remove the g_mbus_config
> > >>>> calls, and instead rely on the parsed sensor v4l2_of_endpoint.
> > >>> 
> > >>> That's not a good point.
> > > 
> > > (mea culpa, s/point/idea/)
> > > 
> > >>> The imx-media driver must not parse the sensor DT node as it is not
> > >>> aware of what bindings the sensor is compatible with.
> > 
> > Hi Laurent,
> > 
> > I don't really understand this argument. The sensor node has been found
> > by parsing the OF graph, so it is known to be a camera sensor node at
> > that point.
> 
> All you know in the i.MX6 driver is that the remote node is a video source. 
> You can rely on the fact that it implements the OF graph bindings to locate 
> other ports in that DT node, but that's more or less it.
> 
> DT properties are defined by DT bindings and thus qualified by a compatible 
> string. Unless you match on sensor compat strings in the i.MX6 driver (which 
> you shouldn't do, to keep the driver generic) you can't know for certain how 
> to parse the sensor node DT properties. For all you know, the video source 
> could be a bridge such as an HDMI to CSI-2 converter for instance, so you 
> can't even rely on the fact that it's a sensor.
> 
> > >>> Information must instead be queried from the sensor subdev at runtime,
> > >>> through the g_mbus_config() operation.
> > >>> 
> > >>> Of course, if you can get the information from the imx-media DT node,
> > >>> that's certainly an option. It's only information provided by the sensor
> > >>> driver that you have no choice but query using a subdev operation.
> > >> 
> > >> Shouldn't this come from the imx-media DT node? BTW, why is omap3isp
> > >> using this?
> > > 
> > > It all depends on what type of information needs to be retrieved, and
> > > whether it can change at runtime or is fixed. Adding properties to the
> > > imx-media DT node is certainly fine as long as those properties describe
> > > the i.MX side.
> >
> > In this case the info needed is the media bus type. That info is most easily
> > available by calling v4l2_of_parse_endpoint() on the sensor's endpoint
> > node.
> 
> I haven't had time to check the code in details yet, so I can't really comment 
> on what you need and how it should be implemented exactly.
> 
> > The media bus type is not something that can be added to the
> > imx-media node since it contains no endpoint nodes.
> 
> Agreed. You have endpoints in the CSI nodes though.
> 
> > > In the omap3isp case, we use the operation to query whether parallel data
> > > contains embedded sync (BT.656) or uses separate h/v sync signals.
> > > 
> > >> The reason I am suspicious about this op is that it came from soc-camera
> > >> and predates the DT. The contents of v4l2_mbus_config seems very much
> > >> like a HW description to me, i.e. something that belongs in the DT.
> > > 
> > > Part of it is possibly outdated, but for buses that support multiple modes
> > > of operation (such as the parallel bus case described above) we need to
> > > make that information discoverable at runtime. Maybe this should be
> > > considered as related to Sakari's efforts to support VC/DT for CSI-2, and
> > > supported through the API he is working on.
> > 
> > That sounds interesting, can you point me to some info on this effort?
> 
> Sure.
> 
> http://git.retiisi.org.uk/?p=~sailus/linux.git;a=shortlog;h=refs/heads/vc
> 
> > I've been thinking the DT should contain virtual channel info for CSI-2
> > buses.
> 
> I don't think it should. CSI-2 virtual channels and data types should be 
> handled as a software concept, and thus supported through driver code without 
> involving DT.

Laurent,

So when you have a CSI2 port aggregator for instance where traffic from up
to 4 CSI2 sources where each source is now assigned its own VC by the
aggregator and interleaved into a single CSI2 Receiver. I was hoping that
in this case the VC would be DT discoverable as a specicic source identifier.
So the CSI-RX side could associate a specific source and create its own
video device. I am guessing that no such thing exist today?

Benoit

> 
> -- 
> Regards,
> 
> Laurent Pinchart
>