[PATCH v2 0/6] Updates for Marvell Switch SoCs

[PATCH v2 0/6] Updates for Marvell Switch SoCs

[Chris Packham]

Shortly after I posted my last series I got access to a more recent
Marvell SDK which had some device tree support for the switch SoCs I'd
been wanting. It was still based on an older kernel but it was a huge
improvement over what came before.

Patch 1/6 is a typo I noticed after my initial series was applied.

Patch 2/6 is a bit of a cleanup. I did initially struggle with how to
access individual parts of the DFX block as well as retaining a handle on
the entire thing for the switch driver to use.

Patch 3/6 is a re-jig of the dtsi files which is needed by 5/6. This is
required because I need to use the coreclk label on a different node. It
also means I don't have to disable nodes for blocks that only exist on
the Armada-XP.

Patch 4/6, 5/6 and 6/6 are ported from the Marvell Linux kernel. I've tested
them on the hardware I have access to and things look pretty good.

Chris Packham (6):
  ARM: dts: Fix typo in armada-xp-98dx4251
    Changes in v2:
    - new
  ARM: dts: armada-xp-98dx3236: combine dfx server nodes
    Changes in v2:
    - none
  ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236
    Changes in v2:
    - Update root compatible strings in armada-xp-98dx3336.dtsi,
      armada-xp-98dx4251.dtsi, armada-xp-db-dxbc2.dts and
      armada-xp-db-xc3-24g4xg.dts
  ARM: mvebu: Add mv98dx3236-soc-id
    Changes in v2:
    - none
  ARM: dts: mvebu: Move mv98dx3236 clock bindings
    Changes in v2:
    - New. Split out from "clk: mvebu: Expand mv98dx3236-core-clock support"
  clk: mvebu: Expand mv98dx3236-core-clock support
    Changes in v2:
    - split dts updates into separate patch
    - add 98DX4251 specific support

 .../bindings/arm/marvell/mv98dx3236-soc-id.txt     |  14 ++
 .../devicetree/bindings/clock/mvebu-core-clock.txt |   7 +
 .../bindings/clock/mvebu-gated-clock.txt           |  11 ++
 .../devicetree/bindings/net/marvell,prestera.txt   |  13 +-
 arch/arm/boot/dts/armada-xp-98dx3236.dtsi          | 211 ++++++++++++++++-----
 arch/arm/boot/dts/armada-xp-98dx3336.dtsi          |   2 +-
 arch/arm/boot/dts/armada-xp-98dx4251.dtsi          |   2 +-
 arch/arm/boot/dts/armada-xp-db-dxbc2.dts           |   2 +-
 arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts      |   2 +-
 arch/arm/mach-mvebu/mvebu-soc-id.c                 |  43 ++++-
 drivers/clk/mvebu/Makefile                         |   2 +-
 drivers/clk/mvebu/armada-xp.c                      |  13 --
 drivers/clk/mvebu/mv98dx3236.c                     | 180 ++++++++++++++++++
 13 files changed, 422 insertions(+), 80 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/marvell/mv98dx3236-soc-id.txt
 create mode 100644 drivers/clk/mvebu/mv98dx3236.c

-- 
2.11.0.24.ge6920cf

[PATCH v2 1/6] ARM: dts: Fix typo in armada-xp-98dx4251

[Chris Packham]

The compatible should be 98dx4251 not 98dx4521.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v2
    - new

 arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
index 4b0533a4ccb7..b9d9b269efb4 100644
--- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
@@ -49,7 +49,7 @@
 
 / {
 	model = "Marvell 98DX4251 SoC";
-	compatible = "marvell,armadaxp-98dx4521", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
 
 	cpus {
 		cpu@1 {
-- 
2.11.0.24.ge6920cf

Re: [PATCH v2 1/6] ARM: dts: Fix typo in armada-xp-98dx4251

[Gregory CLEMENT]

Hi Chris,
 
 On mar., févr. 07 2017, Chris Packham <chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org> wrote:

> The compatible should be 98dx4251 not 98dx4521.
>
> Signed-off-by: Chris Packham <chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>

Applied on mvebu/dt

If it's too late for a PR to arm-soc I will move it in mvebu/fixes once
the v4.11-rc1 will be released.

Thanks,

Gregory

> ---
>
> Notes:
>     Changes in v2
>     - new
>
>  arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> index 4b0533a4ccb7..b9d9b269efb4 100644
> --- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> @@ -49,7 +49,7 @@
>  
>  / {
>  	model = "Marvell 98DX4251 SoC";
> -	compatible = "marvell,armadaxp-98dx4521", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
> +	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
>  
>  	cpus {
>  		cpu@1 {
> -- 
> 2.11.0.24.ge6920cf
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 2/6] ARM: dts: armada-xp-98dx3236: combine dfx server nodes

[Chris Packham]

Rather than having a separate node for the dfx server add a reg property
to the parent node. This give somes compatibility with the Marvell
supplied SDK.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v2:
    - none

 Documentation/devicetree/bindings/net/marvell,prestera.txt | 13 +++++--------
 arch/arm/boot/dts/armada-xp-98dx3236.dtsi                  |  8 ++------
 2 files changed, 7 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
index 5fbab29718e8..c329608fa887 100644
--- a/Documentation/devicetree/bindings/net/marvell,prestera.txt
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
@@ -32,19 +32,16 @@ DFX Server bindings
 -------------------
 
 Required properties:
-- compatible: must be "marvell,dfx-server"
+- compatible: must be "marvell,dfx-server", "simple-bus"
+- ranges: describes the address mapping of a memory-mapped bus.
 - reg: address and length of the register set for the device.
 
 Example:
 
-dfx-registers {
-	compatible = "simple-bus";
+dfx-server {
+	compatible = "marvell,dfx-server", "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
-
-	dfx: dfx@0 {
-		compatible = "marvell,dfx-server";
-		reg = <0 0x100000>;
-	};
+	reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
 };
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index f6a03dcee5ef..bd8261fdec81 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -195,11 +195,12 @@
 			};
 		};
 
-		dfxr: dfx-registers@ac000000 {
+		dfx: dfx-server@ac000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
 
 			dfx_coredivclk: corediv-clock@f8268 {
 				compatible = "marvell,mv98dx3236-corediv-clock";
@@ -208,11 +209,6 @@
 				clocks = <&mainpll>;
 				clock-output-names = "nand";
 			};
-
-			dfx: dfx@0 {
-				compatible = "marvell,dfx-server";
-				reg = <0 0x100000>;
-			};
 		};
 
 		switch: switch@a8000000 {
-- 
2.11.0.24.ge6920cf

Re: [PATCH v2 2/6] ARM: dts: armada-xp-98dx3236: combine dfx server nodes

[Rob Herring]

On Wed, Feb 08, 2017 at 09:28:11AM +1300, Chris Packham wrote:
> Rather than having a separate node for the dfx server add a reg property
> to the parent node. This give somes compatibility with the Marvell
> supplied SDK.

But breaks upstream compatibility. Need to explain why that's okay.

> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> 
> Notes:
>     Changes in v2:
>     - none
> 
>  Documentation/devicetree/bindings/net/marvell,prestera.txt | 13 +++++--------
>  arch/arm/boot/dts/armada-xp-98dx3236.dtsi                  |  8 ++------
>  2 files changed, 7 insertions(+), 14 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
> index 5fbab29718e8..c329608fa887 100644
> --- a/Documentation/devicetree/bindings/net/marvell,prestera.txt
> +++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
> @@ -32,19 +32,16 @@ DFX Server bindings
>  -------------------
>  
>  Required properties:
> -- compatible: must be "marvell,dfx-server"
> +- compatible: must be "marvell,dfx-server", "simple-bus"
> +- ranges: describes the address mapping of a memory-mapped bus.
>  - reg: address and length of the register set for the device.
>  
>  Example:
>  
> -dfx-registers {
> -	compatible = "simple-bus";
> +dfx-server {
> +	compatible = "marvell,dfx-server", "simple-bus";
>  	#address-cells = <1>;
>  	#size-cells = <1>;
>  	ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
> -
> -	dfx: dfx@0 {
> -		compatible = "marvell,dfx-server";
> -		reg = <0 0x100000>;
> -	};
> +	reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
>  };
> diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> index f6a03dcee5ef..bd8261fdec81 100644
> --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> @@ -195,11 +195,12 @@
>  			};
>  		};
>  
> -		dfxr: dfx-registers@ac000000 {
> +		dfx: dfx-server@ac000000 {
>  			compatible = "simple-bus";

Missing marvell,dfx-server?

>  			#address-cells = <1>;
>  			#size-cells = <1>;
>  			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
> +			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
>  
>  			dfx_coredivclk: corediv-clock@f8268 {
>  				compatible = "marvell,mv98dx3236-corediv-clock";
> @@ -208,11 +209,6 @@
>  				clocks = <&mainpll>;
>  				clock-output-names = "nand";
>  			};
> -
> -			dfx: dfx@0 {
> -				compatible = "marvell,dfx-server";
> -				reg = <0 0x100000>;
> -			};
>  		};
>  
>  		switch: switch@a8000000 {
> -- 
> 2.11.0.24.ge6920cf
> 

[PATCH v2 3/6] ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236

[Chris Packham]

The Marvell datasheets refer to the integrated CPU as "Armada-XP". In
reality there are a number of differences to the actual Armada-XP so
rather than including armada-xp.dtsi and disabling many of the IP
blocks. Include armada-370-xp.dtsi and add the required nodes.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v2:
    - Update root compatible strings in armada-xp-98dx3336.dtsi,
      armada-xp-98dx4251.dtsi, armada-xp-db-dxbc2.dts and
      armada-xp-db-xc3-24g4xg.dts

 arch/arm/boot/dts/armada-xp-98dx3236.dtsi     | 194 ++++++++++++++++++++------
 arch/arm/boot/dts/armada-xp-98dx3336.dtsi     |   2 +-
 arch/arm/boot/dts/armada-xp-98dx4251.dtsi     |   2 +-
 arch/arm/boot/dts/armada-xp-db-dxbc2.dts      |   2 +-
 arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts |   2 +-
 5 files changed, 155 insertions(+), 47 deletions(-)

diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index bd8261fdec81..cbf5cd0c6429 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -45,11 +45,14 @@
  * common to all Armada XP SoCs.
  */
 
-#include "armada-xp.dtsi"
+#include "armada-370-xp.dtsi"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
 	model = "Marvell 98DX3236 SoC";
-	compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
 
 	aliases {
 		gpio0 = &gpio0;
@@ -72,12 +75,19 @@
 	};
 
 	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
 			  MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
 			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
 
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
 		/*
 		 * 98DX3236 has 1 x1 PCIe unit Gen2.0
 		 */
@@ -117,31 +127,92 @@
 		};
 
 		internal-regs {
+			sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: l2-cache@8000 {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-level = <2>;
+				cache-unified;
+				wt-override;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			/* does not exist */
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				status = "disabled";
+			};
+
+			gpio2: gpio@18180 { /* rework some properties */
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <1>; /* only gpio #32 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>;
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-xp-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
 			coreclk: mvebu-sar@18230 {
 				compatible = "marvell,mv98dx3236-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
 			};
 
 			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
 				compatible = "marvell,mv98dx3236-cpu-clock";
+				reg = <0x18700 0x24>, <0x1c054 0x10>;
+				clocks = <&coreclk 1>;
 			};
 
 			corediv-clock@18740 {
 				status = "disabled";
 			};
 
-			xor@60900 {
-				status = "disabled";
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
 			};
 
-			crypto@90000 {
-				status = "disabled";
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
 			};
 
-			xor@f0900 {
-				status = "disabled";
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
 			};
 
-			xor@f0800 {
+			xor1: xor@f0800 {
 				compatible = "marvell,orion-xor";
 				reg = <0xf0800 0x100
 				       0xf0a00 0x100>;
@@ -161,37 +232,28 @@
 				};
 			};
 
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			/* does not exist */
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				status = "disabled";
+			nand: nand@d0000 {
+				clocks = <&dfx_coredivclk 0>;
 			};
 
-			gpio2: gpio@18180 { /* rework some properties */
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <1>; /* only gpio #32 */
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>;
-			};
+			xor0: xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
 
-			nand: nand@d0000 {
-				clocks = <&dfx_coredivclk 0>;
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
 			};
 		};
 
@@ -225,6 +287,53 @@
 			};
 		};
 	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
+
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11100 0x100>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
 };
 
 &pinctrl {
@@ -237,14 +346,13 @@
 	};
 };
 
-&sdio {
-	status = "disabled";
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
 };
 
-&crypto_sram0 {
+&sdio {
 	status = "disabled";
 };
 
-&crypto_sram1 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
index e1580afdc260..a0d81bd7312b 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
@@ -49,7 +49,7 @@
 
 / {
 	model = "Marvell 98DX3336 SoC";
-	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
 
 	cpus {
 		cpu@1 {
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
index b9d9b269efb4..51de91b31a9d 100644
--- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
@@ -49,7 +49,7 @@
 
 / {
 	model = "Marvell 98DX4251 SoC";
-	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
 
 	cpus {
 		cpu@1 {
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
index 605d855b0147..f624894c2ab6 100644
--- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
+++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
@@ -58,7 +58,7 @@
 
 / {
 	model = "Marvell Bobcat2 Evaluation Board";
-	compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
index 4e07cb6ed800..06fce35d7491 100644
--- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
+++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
@@ -58,7 +58,7 @@
 
 / {
 	model = "DB-XC3-24G4XG";
-	compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp";
+	compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
-- 
2.11.0.24.ge6920cf

[PATCH v2 4/6] ARM: mvebu: Add mv98dx3236-soc-id

[Chris Packham]

The DFX server on the 98dx3236 and compatible SoCs has an ID register
that provides revision information that the PCI based ID register
doesn't have. Use this if it's available.

Signed-off-by: Chris Packham <chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>
---

Notes:
    Changes in v2:
    - none

 .../bindings/arm/marvell/mv98dx3236-soc-id.txt     | 14 +++++++
 arch/arm/boot/dts/armada-xp-98dx3236.dtsi          |  5 +++
 arch/arm/mach-mvebu/mvebu-soc-id.c                 | 43 ++++++++++++++++++++--
 3 files changed, 59 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/marvell/mv98dx3236-soc-id.txt

diff --git a/Documentation/devicetree/bindings/arm/marvell/mv98dx3236-soc-id.txt b/Documentation/devicetree/bindings/arm/marvell/mv98dx3236-soc-id.txt
new file mode 100644
index 000000000000..ed08cb126a83
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/mv98dx3236-soc-id.txt
@@ -0,0 +1,14 @@
+Marvell 98dx3236 SoC ID
+---------------------------------------------------------------
+
+Required properties:
+
+- compatible: Should be "marvell,mv98dx3236-soc-id".
+
+- reg: should be the register base and length as documented in the
+  datasheet for the Device ID Status
+
+soc-id@f8244 {
+	compatible = "marvell,mv98dx3236-soc-id";
+	reg = <0xf8244 0x4>;
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index cbf5cd0c6429..e4baa97836e7 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -264,6 +264,11 @@
 			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
 			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
 
+			soc-id@f8244 {
+				compatible = "marvell,mv98dx3236-soc-id";
+				reg = <0xf8244 0x4>;
+			};
+
 			dfx_coredivclk: corediv-clock@f8268 {
 				compatible = "marvell,mv98dx3236-corediv-clock";
 				reg = <0xf8268 0xc>;
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c
index a99434bcee84..b4c94a57f358 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.c
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
@@ -34,6 +34,9 @@
 #define SOC_ID_MASK	    0xFFFF0000
 #define SOC_REV_MASK	    0xFF
 
+#define MV98DX3236_DEV_ID_MASK	0xFF00
+#define MV98DX3236_REV_MASK	0xF
+
 static u32 soc_dev_id;
 static u32 soc_rev;
 static bool is_id_valid;
@@ -45,6 +48,11 @@ static const struct of_device_id mvebu_pcie_of_match_table[] = {
 	{},
 };
 
+static const struct of_device_id mvebu_mv98dx3236_of_match_table[] = {
+	{ .compatible = "marvell,mv98dx3236-soc-id", },
+	{},
+};
+
 int mvebu_get_soc_id(u32 *dev, u32 *rev)
 {
 	if (is_id_valid) {
@@ -131,15 +139,44 @@ static int __init get_soc_id_by_pci(void)
 	return ret;
 }
 
+static int __init mvebu_dfx_get_soc_id(u32 *dev, u32 *rev)
+{
+	struct device_node *np;
+	void __iomem *base;
+
+	np = of_find_matching_node(NULL, mvebu_mv98dx3236_of_match_table);
+	if (!np)
+		return -ENODEV;
+
+	base = of_iomap(np, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* SoC ID */
+	*dev = (readl(base) >> 12) & MV98DX3236_DEV_ID_MASK;
+	/* SoC revision */
+	*rev = (readl(base) >> 28) & MV98DX3236_REV_MASK;
+
+	iounmap(base);
+	of_node_put(np);
+
+	return 0;
+}
+
 static int __init mvebu_soc_id_init(void)
 {
 
 	/*
-	 * First try to get the ID and the revision by the system
-	 * register and use PCI registers only if it is not possible
+	 * First try to get the ID and the revision by from system controller
+	 * register, then try the DFX register (if applicable), finally read it
+	 * from PCI registers.
 	 */
-	if (!mvebu_system_controller_get_soc_id(&soc_dev_id, &soc_rev)) {
+	if (!mvebu_system_controller_get_soc_id(&soc_dev_id, &soc_rev))
+		is_id_valid = true;
+	else if (!mvebu_dfx_get_soc_id(&soc_dev_id, &soc_rev))
 		is_id_valid = true;
+
+	if (is_id_valid) {
 		pr_info("MVEBU SoC ID=0x%X, Rev=0x%X\n", soc_dev_id, soc_rev);
 		return 0;
 	}
-- 
2.11.0.24.ge6920cf

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/6] ARM: mvebu: Add mv98dx3236-soc-id

[Gregory CLEMENT]

Hi Chris,
 
 On mar., févr. 07 2017, Chris Packham <chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org> wrote:

> The DFX server on the 98dx3236 and compatible SoCs has an ID register
> that provides revision information that the PCI based ID register
> doesn't have. Use this if it's available.
>

Could you split this patch in two part: one for device tree and one for
the C code?

Thanks,

Gregory

> Signed-off-by: Chris Packham <chris.packham-6g8wRflRTwXFdCa3tKVlE6U/zSkkHjvu@public.gmane.org>
> ---
>
> Notes:
>     Changes in v2:
>     - none
>
>  .../bindings/arm/marvell/mv98dx3236-soc-id.txt     | 14 +++++++
>  arch/arm/boot/dts/armada-xp-98dx3236.dtsi          |  5 +++
>  arch/arm/mach-mvebu/mvebu-soc-id.c                 | 43 ++++++++++++++++++++--
>  3 files changed, 59 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/marvell/mv98dx3236-soc-id.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/marvell/mv98dx3236-soc-id.txt b/Documentation/devicetree/bindings/arm/marvell/mv98dx3236-soc-id.txt
> new file mode 100644
> index 000000000000..ed08cb126a83
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/marvell/mv98dx3236-soc-id.txt
> @@ -0,0 +1,14 @@
> +Marvell 98dx3236 SoC ID
> +---------------------------------------------------------------
> +
> +Required properties:
> +
> +- compatible: Should be "marvell,mv98dx3236-soc-id".
> +
> +- reg: should be the register base and length as documented in the
> +  datasheet for the Device ID Status
> +
> +soc-id@f8244 {
> +	compatible = "marvell,mv98dx3236-soc-id";
> +	reg = <0xf8244 0x4>;
> +};
> diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> index cbf5cd0c6429..e4baa97836e7 100644
> --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> @@ -264,6 +264,11 @@
>  			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
>  			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
>  
> +			soc-id@f8244 {
> +				compatible = "marvell,mv98dx3236-soc-id";
> +				reg = <0xf8244 0x4>;
> +			};
> +
>  			dfx_coredivclk: corediv-clock@f8268 {
>  				compatible = "marvell,mv98dx3236-corediv-clock";
>  				reg = <0xf8268 0xc>;
> diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c
> index a99434bcee84..b4c94a57f358 100644
> --- a/arch/arm/mach-mvebu/mvebu-soc-id.c
> +++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
> @@ -34,6 +34,9 @@
>  #define SOC_ID_MASK	    0xFFFF0000
>  #define SOC_REV_MASK	    0xFF
>  
> +#define MV98DX3236_DEV_ID_MASK	0xFF00
> +#define MV98DX3236_REV_MASK	0xF
> +
>  static u32 soc_dev_id;
>  static u32 soc_rev;
>  static bool is_id_valid;
> @@ -45,6 +48,11 @@ static const struct of_device_id mvebu_pcie_of_match_table[] = {
>  	{},
>  };
>  
> +static const struct of_device_id mvebu_mv98dx3236_of_match_table[] = {
> +	{ .compatible = "marvell,mv98dx3236-soc-id", },
> +	{},
> +};
> +
>  int mvebu_get_soc_id(u32 *dev, u32 *rev)
>  {
>  	if (is_id_valid) {
> @@ -131,15 +139,44 @@ static int __init get_soc_id_by_pci(void)
>  	return ret;
>  }
>  
> +static int __init mvebu_dfx_get_soc_id(u32 *dev, u32 *rev)
> +{
> +	struct device_node *np;
> +	void __iomem *base;
> +
> +	np = of_find_matching_node(NULL, mvebu_mv98dx3236_of_match_table);
> +	if (!np)
> +		return -ENODEV;
> +
> +	base = of_iomap(np, 0);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	/* SoC ID */
> +	*dev = (readl(base) >> 12) & MV98DX3236_DEV_ID_MASK;
> +	/* SoC revision */
> +	*rev = (readl(base) >> 28) & MV98DX3236_REV_MASK;
> +
> +	iounmap(base);
> +	of_node_put(np);
> +
> +	return 0;
> +}
> +
>  static int __init mvebu_soc_id_init(void)
>  {
>  
>  	/*
> -	 * First try to get the ID and the revision by the system
> -	 * register and use PCI registers only if it is not possible
> +	 * First try to get the ID and the revision by from system controller
> +	 * register, then try the DFX register (if applicable), finally read it
> +	 * from PCI registers.
>  	 */
> -	if (!mvebu_system_controller_get_soc_id(&soc_dev_id, &soc_rev)) {
> +	if (!mvebu_system_controller_get_soc_id(&soc_dev_id, &soc_rev))
> +		is_id_valid = true;
> +	else if (!mvebu_dfx_get_soc_id(&soc_dev_id, &soc_rev))
>  		is_id_valid = true;
> +
> +	if (is_id_valid) {
>  		pr_info("MVEBU SoC ID=0x%X, Rev=0x%X\n", soc_dev_id, soc_rev);
>  		return 0;
>  	}
> -- 
> 2.11.0.24.ge6920cf
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 5/6] ARM: dts: mvebu: Move mv98dx3236 clock bindings

[Chris Packham]

This moves the coreclk binding for the 98dx3236 SoC to the DFX block
where the sampled at reset register is located and switches to using the
correct gating clock compatible string.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v2:
    - New. Split out from "clk: mvebu: Expand mv98dx3236-core-clock support"

 .../devicetree/bindings/clock/mvebu-core-clock.txt         |  7 +++++++
 .../devicetree/bindings/clock/mvebu-gated-clock.txt        | 11 +++++++++++
 arch/arm/boot/dts/armada-xp-98dx3236.dtsi                  | 14 +++++++-------
 3 files changed, 25 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
index eb985a633d59..796c260c183d 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -31,6 +31,12 @@ The following is a list of provided IDs and clock names on Armada 39x:
  4 = dclk    (SDRAM Interface Clock)
  5 = refclk  (Reference Clock)
 
+The following is a list of provided IDs and clock names on 98dx3236:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = ddrclk   (DDR clock)
+ 3 = mpll    (MPLL Clock)
+
 The following is a list of provided IDs and clock names on Kirkwood and Dove:
  0 = tclk   (Internal Bus clock)
  1 = cpuclk (CPU0 clock)
@@ -49,6 +55,7 @@ Required properties:
 	"marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks
 	"marvell,armada-390-core-clock" - For Armada 39x SoC core clocks
 	"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
+	"marvell,mv98dx3236-core-clock" - For 98dx3236 family SoC core clocks
 	"marvell,dove-core-clock" - for Dove SoC core clocks
 	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
 	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index 5142efc8099d..de562da2ae77 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -119,6 +119,16 @@ ID	Clock	Peripheral
 29	sata1lnk
 30	sata1	SATA Host 1
 
+The following is a list of provided IDs for 98dx3236:
+ID	Clock	Peripheral
+-----------------------------------
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+17	sdio	SDHCI Host
+18	usb0	USB Host 0
+22	xor0	XOR DMA 0
+
 The following is a list of provided IDs for Dove:
 ID	Clock	Peripheral
 -----------------------------------
@@ -169,6 +179,7 @@ Required properties:
 	"marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating
 	"marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating
 	"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
+	"marvell,mv98dx3236-gating-clock" - for 98dx3236 SoC clock gating
 	"marvell,dove-gating-clock" - for Dove SoC clock gating
 	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
 - reg : shall be the register address of the Clock Gating Control register
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index e4baa97836e7..e80a5ee835e5 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -176,18 +176,12 @@
 			};
 
 			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-xp-gating-clock";
+				compatible = "marvell,mv98dx3236-gating-clock";
 				reg = <0x18220 0x4>;
 				clocks = <&coreclk 0>;
 				#clock-cells = <1>;
 			};
 
-			coreclk: mvebu-sar@18230 {
-				compatible = "marvell,mv98dx3236-core-clock";
-				reg = <0x18230 0x08>;
-				#clock-cells = <1>;
-			};
-
 			cpuclk: clock-complex@18700 {
 				#clock-cells = <1>;
 				compatible = "marvell,mv98dx3236-cpu-clock";
@@ -264,6 +258,12 @@
 			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
 			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
 
+			coreclk: mvebu-sar@f8204 {
+				compatible = "marvell,mv98dx3236-core-clock";
+				reg = <0xf8204 0x4>;
+				#clock-cells = <1>;
+			};
+
 			soc-id@f8244 {
 				compatible = "marvell,mv98dx3236-soc-id";
 				reg = <0xf8244 0x4>;
-- 
2.11.0.24.ge6920cf

Re: [PATCH v2 5/6] ARM: dts: mvebu: Move mv98dx3236 clock bindings

[Rob Herring]

On Wed, Feb 08, 2017 at 09:28:14AM +1300, Chris Packham wrote:
> This moves the coreclk binding for the 98dx3236 SoC to the DFX block
> where the sampled at reset register is located and switches to using the
> correct gating clock compatible string.

Moves why? It was wrong before?

> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> 
> Notes:
>     Changes in v2:
>     - New. Split out from "clk: mvebu: Expand mv98dx3236-core-clock support"
> 
>  .../devicetree/bindings/clock/mvebu-core-clock.txt         |  7 +++++++
>  .../devicetree/bindings/clock/mvebu-gated-clock.txt        | 11 +++++++++++
>  arch/arm/boot/dts/armada-xp-98dx3236.dtsi                  | 14 +++++++-------
>  3 files changed, 25 insertions(+), 7 deletions(-)

[PATCH v2 0/6] Updates for Marvell Switch SoCs

[Chris Packham]

Shortly after I posted my last series I got access to a more recent
Marvell SDK which had some device tree support for the switch SoCs I'd
been wanting. It was still based on an older kernel but it was a huge
improvement over what came before.

Patch 1/6 is a typo I noticed after my initial series was applied.

Patch 2/6 is a bit of a cleanup. I did initially struggle with how to
access individual parts of the DFX block as well as retaining a handle on
the entire thing for the switch driver to use.

Patch 3/6 is a re-jig of the dtsi files which is needed by 5/6. This is
required because I need to use the coreclk label on a different node. It
also means I don't have to disable nodes for blocks that only exist on
the Armada-XP.

Patch 4/6, 5/6 are split from the previous versions.

Patch 6/6 is the device tree portion of a change already in clk-next.

Chris Packham (6):
  ARM: dts: Fix typo in armada-xp-98dx4251
    Changes in v2
    - new
    Changes in v3:
    - none
  ARM: dts: armada-xp-98dx3236: combine dfx server nodes
    Changes in v2:
    - none
    Changes in v3:
    - none
  ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236
    Changes in v2:
    - Update root compatible strings in armada-xp-98dx3336.dtsi,
      armada-xp-98dx4251.dtsi, armada-xp-db-dxbc2.dts and
      armada-xp-db-xc3-24g4xg.dts
    Changes in v3:
    - none
  ARM: dts: mvebu: Add binding for mv98dx3236-soc-id
    Changes in v3:
    - new, split from driver
  ARM: mvebu: Add driver for mv98dx3236-soc-id
    Changes in v2:
    - none
    Changes in v3:
    - split from dts changes
  ARM: dts: mvebu: Move mv98dx3236 clock bindings
    Changes in v2:
    - New. Split out from "clk: mvebu: Expand mv98dx3236-core-clock support"
    Changes in v3:
    - Clarify why the old location was wrong (but worked).


 .../bindings/arm/marvell/mv98dx3236-soc-id.txt     |  14 ++
 .../devicetree/bindings/clock/mvebu-core-clock.txt |   7 +
 .../bindings/clock/mvebu-gated-clock.txt           |  11 ++
 .../devicetree/bindings/net/marvell,prestera.txt   |  13 +-
 arch/arm/boot/dts/armada-xp-98dx3236.dtsi          | 213 ++++++++++++++++-----
 arch/arm/boot/dts/armada-xp-98dx3336.dtsi          |   2 +-
 arch/arm/boot/dts/armada-xp-98dx4251.dtsi          |   2 +-
 arch/arm/boot/dts/armada-xp-db-dxbc2.dts           |   2 +-
 arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts      |   2 +-
 arch/arm/mach-mvebu/mvebu-soc-id.c                 |  43 ++++-
 10 files changed, 242 insertions(+), 67 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/marvell/mv98dx3236-soc-id.txt

-- 
2.11.0.24.ge6920cf
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 0/6] Updates for Marvell Switch SoCs

[Gregory CLEMENT]

Hi Chris,
 
 On jeu., févr. 16 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:

> Shortly after I posted my last series I got access to a more recent
> Marvell SDK which had some device tree support for the switch SoCs I'd
> been wanting. It was still based on an older kernel but it was a huge
> improvement over what came before.
>
> Patch 1/6 is a typo I noticed after my initial series was applied.
>
> Patch 2/6 is a bit of a cleanup. I did initially struggle with how to
> access individual parts of the DFX block as well as retaining a handle on
> the entire thing for the switch driver to use.
>
> Patch 3/6 is a re-jig of the dtsi files which is needed by 5/6. This is
> required because I need to use the coreclk label on a different node. It
> also means I don't have to disable nodes for blocks that only exist on
> the Armada-XP.
>
> Patch 4/6, 5/6 are split from the previous versions.
>
> Patch 6/6 is the device tree portion of a change already in clk-next.


I applied patches 2, 3 and 6 on mvebu/dt with the acked-by from Rob when
he gave it.

Patch 1 is already part of 4.11-rc1.

For patch 4 and 5 I understand that either we don't need it or it should
be a updated version so I skipped them.

Thanks,

Gregory

>
> Chris Packham (6):
>   ARM: dts: Fix typo in armada-xp-98dx4251
>     Changes in v2
>     - new
>     Changes in v3:
>     - none
>   ARM: dts: armada-xp-98dx3236: combine dfx server nodes
>     Changes in v2:
>     - none
>     Changes in v3:
>     - none
>   ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236
>     Changes in v2:
>     - Update root compatible strings in armada-xp-98dx3336.dtsi,
>       armada-xp-98dx4251.dtsi, armada-xp-db-dxbc2.dts and
>       armada-xp-db-xc3-24g4xg.dts
>     Changes in v3:
>     - none
>   ARM: dts: mvebu: Add binding for mv98dx3236-soc-id
>     Changes in v3:
>     - new, split from driver
>   ARM: mvebu: Add driver for mv98dx3236-soc-id
>     Changes in v2:
>     - none
>     Changes in v3:
>     - split from dts changes
>   ARM: dts: mvebu: Move mv98dx3236 clock bindings
>     Changes in v2:
>     - New. Split out from "clk: mvebu: Expand mv98dx3236-core-clock support"
>     Changes in v3:
>     - Clarify why the old location was wrong (but worked).
>
>
>  .../bindings/arm/marvell/mv98dx3236-soc-id.txt     |  14 ++
>  .../devicetree/bindings/clock/mvebu-core-clock.txt |   7 +
>  .../bindings/clock/mvebu-gated-clock.txt           |  11 ++
>  .../devicetree/bindings/net/marvell,prestera.txt   |  13 +-
>  arch/arm/boot/dts/armada-xp-98dx3236.dtsi          | 213 ++++++++++++++++-----
>  arch/arm/boot/dts/armada-xp-98dx3336.dtsi          |   2 +-
>  arch/arm/boot/dts/armada-xp-98dx4251.dtsi          |   2 +-
>  arch/arm/boot/dts/armada-xp-db-dxbc2.dts           |   2 +-
>  arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts      |   2 +-
>  arch/arm/mach-mvebu/mvebu-soc-id.c                 |  43 ++++-
>  10 files changed, 242 insertions(+), 67 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/marvell/mv98dx3236-soc-id.txt
>
> -- 
> 2.11.0.24.ge6920cf

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 0/6] Updates for Marvell Switch SoCs

[Chris Packham]

Hi Gregory,

On 08/03/17 06:10, Gregory CLEMENT wrote:
> Hi Chris,
>
>  On jeu., févr. 16 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
>
>> Shortly after I posted my last series I got access to a more recent
>> Marvell SDK which had some device tree support for the switch SoCs I'd
>> been wanting. It was still based on an older kernel but it was a huge
>> improvement over what came before.
>>
>> Patch 1/6 is a typo I noticed after my initial series was applied.
>>
>> Patch 2/6 is a bit of a cleanup. I did initially struggle with how to
>> access individual parts of the DFX block as well as retaining a handle on
>> the entire thing for the switch driver to use.
>>
>> Patch 3/6 is a re-jig of the dtsi files which is needed by 5/6. This is
>> required because I need to use the coreclk label on a different node. It
>> also means I don't have to disable nodes for blocks that only exist on
>> the Armada-XP.
>>
>> Patch 4/6, 5/6 are split from the previous versions.
>>
>> Patch 6/6 is the device tree portion of a change already in clk-next.
>
>
> I applied patches 2, 3 and 6 on mvebu/dt with the acked-by from Rob when
> he gave it.
>
> Patch 1 is already part of 4.11-rc1.
>
> For patch 4 and 5 I understand that either we don't need it or it should
> be a updated version so I skipped them.
>

That's correct, thanks.