* [PATCH 1/2] dt-bindings: Add thermal zone to bcm2835-thermal example [not found] <E0A4388D-788A-40B4-9193-36FD75284654@martin.sperl.org> @ 2017-02-04 14:16 ` Stefan Wahren 2017-02-04 14:16 ` [PATCH 2/2] ARM: dts: bcm283x: Add critical thermal zone for GPU Stefan Wahren 2017-02-08 22:02 ` [PATCH 1/2] dt-bindings: Add thermal zone to bcm2835-thermal example Rob Herring 0 siblings, 2 replies; 9+ messages in thread From: Stefan Wahren @ 2017-02-04 14:16 UTC (permalink / raw) To: Eduardo Valentin, Zhang Rui, kernel Cc: Eric Anholt, Rob Herring, Frank Rowand, Florian Fainelli, linux-rpi-kernel, devicetree, linux-pm, Stefan Wahren Add a thermal zone in order to make the example complete. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- .../bindings/thermal/brcm,bcm2835-thermal.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt index 474531d..680aca9 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt @@ -10,6 +10,25 @@ clocks: Phandle of the clock used by the thermal sensor. Example: +thermal-zones { + gpu_thermal: gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; +}; + thermal: thermal@7e212000 { compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] ARM: dts: bcm283x: Add critical thermal zone for GPU 2017-02-04 14:16 ` [PATCH 1/2] dt-bindings: Add thermal zone to bcm2835-thermal example Stefan Wahren @ 2017-02-04 14:16 ` Stefan Wahren [not found] ` <1486217787-15703-2-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org> 2017-02-08 22:02 ` [PATCH 1/2] dt-bindings: Add thermal zone to bcm2835-thermal example Rob Herring 1 sibling, 1 reply; 9+ messages in thread From: Stefan Wahren @ 2017-02-04 14:16 UTC (permalink / raw) To: Eduardo Valentin, Zhang Rui, kernel Cc: Eric Anholt, Rob Herring, Frank Rowand, Florian Fainelli, linux-rpi-kernel, devicetree, linux-pm, Stefan Wahren As suggested by Eduardo Valentin this adds the thermal zone for the bcm2835 SoC. Since we currently don't have any cooling devices leave this section empty. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- arch/arm/boot/dts/bcm283x.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 9c7ec7e..359da9d 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -19,6 +19,25 @@ bootargs = "earlyprintk console=ttyAMA0"; }; + thermal-zones { + gpu_thermal: gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 9+ messages in thread
[parent not found: <1486217787-15703-2-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org>]
* Re: [PATCH 2/2] ARM: dts: bcm283x: Add critical thermal zone for GPU [not found] ` <1486217787-15703-2-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org> @ 2017-02-08 4:19 ` Eduardo Valentin [not found] ` <20170208041929.GA6809-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org> 0 siblings, 1 reply; 9+ messages in thread From: Eduardo Valentin @ 2017-02-08 4:19 UTC (permalink / raw) To: Stefan Wahren Cc: Zhang Rui, kernel-TqfNSX0MhmxHKSADF0wUEw, Eric Anholt, Rob Herring, Frank Rowand, Florian Fainelli, linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-pm-u79uwXL29TY76Z2rM5mHXA On Sat, Feb 04, 2017 at 02:16:27PM +0000, Stefan Wahren wrote: > As suggested by Eduardo Valentin this adds the thermal zone for > the bcm2835 SoC. Since we currently don't have any cooling devices > leave this section empty. > > Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org> > --- > arch/arm/boot/dts/bcm283x.dtsi | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi > index 9c7ec7e..359da9d 100644 > --- a/arch/arm/boot/dts/bcm283x.dtsi > +++ b/arch/arm/boot/dts/bcm283x.dtsi > @@ -19,6 +19,25 @@ > bootargs = "earlyprintk console=ttyAMA0"; > }; > > + thermal-zones { > + gpu_thermal: gpu-thermal { > + polling-delay-passive = <0>; > + polling-delay = <1000>; > + > + thermal-sensors = <&thermal>; > + > + trips { > + cpu-crit { > + temperature = <80000>; > + hysteresis = <0>; > + type = "critical"; > + }; > + }; > + cooling-maps { > + }; > + }; > + }; > + This is fine with me. Checking the other patches in the series. > soc { > compatible = "simple-bus"; > #address-cells = <1>; > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <20170208041929.GA6809-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>]
* Re: [PATCH 2/2] ARM: dts: bcm283x: Add critical thermal zone for GPU [not found] ` <20170208041929.GA6809-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org> @ 2017-02-08 4:23 ` Eduardo Valentin [not found] ` <20170208042351.GB6809-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org> 0 siblings, 1 reply; 9+ messages in thread From: Eduardo Valentin @ 2017-02-08 4:23 UTC (permalink / raw) To: Stefan Wahren Cc: Zhang Rui, kernel-TqfNSX0MhmxHKSADF0wUEw, Eric Anholt, Rob Herring, Frank Rowand, Florian Fainelli, linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-pm-u79uwXL29TY76Z2rM5mHXA On Tue, Feb 07, 2017 at 08:19:31PM -0800, Eduardo Valentin wrote: > On Sat, Feb 04, 2017 at 02:16:27PM +0000, Stefan Wahren wrote: > > As suggested by Eduardo Valentin this adds the thermal zone for > > the bcm2835 SoC. Since we currently don't have any cooling devices > > leave this section empty. > > > > Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org> > > --- > > arch/arm/boot/dts/bcm283x.dtsi | 19 +++++++++++++++++++ > > 1 file changed, 19 insertions(+) > > > > diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi > > index 9c7ec7e..359da9d 100644 > > --- a/arch/arm/boot/dts/bcm283x.dtsi > > +++ b/arch/arm/boot/dts/bcm283x.dtsi > > @@ -19,6 +19,25 @@ > > bootargs = "earlyprintk console=ttyAMA0"; > > }; > > > > + thermal-zones { > > + gpu_thermal: gpu-thermal { > > + polling-delay-passive = <0>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&thermal>; Just came to my mind, dont you need to have an id to specify with sensor points to gpu? > > + > > + trips { > > + cpu-crit { > > + temperature = <80000>; > > + hysteresis = <0>; > > + type = "critical"; > > + }; > > + }; > > + cooling-maps { > > + }; > > + }; > > + }; > > + > > This is fine with me. Checking the other patches in the series. > > > soc { > > compatible = "simple-bus"; > > #address-cells = <1>; > > -- > > 1.7.9.5 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <20170208042351.GB6809-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>]
* Re: [PATCH 2/2] ARM: dts: bcm283x: Add critical thermal zone for GPU [not found] ` <20170208042351.GB6809-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org> @ 2017-02-08 9:56 ` Stefan Wahren 2017-02-08 19:50 ` Eric Anholt 0 siblings, 1 reply; 9+ messages in thread From: Stefan Wahren @ 2017-02-08 9:56 UTC (permalink / raw) To: Eduardo Valentin, Eric Anholt Cc: Zhang Rui, kernel-TqfNSX0MhmxHKSADF0wUEw, Rob Herring, Frank Rowand, Florian Fainelli, linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-pm-u79uwXL29TY76Z2rM5mHXA Am 08.02.2017 um 05:23 schrieb Eduardo Valentin: > On Tue, Feb 07, 2017 at 08:19:31PM -0800, Eduardo Valentin wrote: >> On Sat, Feb 04, 2017 at 02:16:27PM +0000, Stefan Wahren wrote: >>> As suggested by Eduardo Valentin this adds the thermal zone for >>> the bcm2835 SoC. Since we currently don't have any cooling devices >>> leave this section empty. >>> >>> Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org> >>> --- >>> arch/arm/boot/dts/bcm283x.dtsi | 19 +++++++++++++++++++ >>> 1 file changed, 19 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi >>> index 9c7ec7e..359da9d 100644 >>> --- a/arch/arm/boot/dts/bcm283x.dtsi >>> +++ b/arch/arm/boot/dts/bcm283x.dtsi >>> @@ -19,6 +19,25 @@ >>> bootargs = "earlyprintk console=ttyAMA0"; >>> }; >>> >>> + thermal-zones { >>> + gpu_thermal: gpu-thermal { >>> + polling-delay-passive = <0>; >>> + polling-delay = <1000>; >>> + >>> + thermal-sensors = <&thermal>; > Just came to my mind, dont you need to have an id to specify with sensor > points to gpu? Sorry, i don't know the exact setup of the single thermal sensor on the SoC (datasheet doesn't provide any helpful information). I adapted the Renesas R-Car thermal binding because i think it would be the best match. @Eric: What's your opinion? > >>> + >>> + trips { >>> + cpu-crit { >>> + temperature = <80000>; >>> + hysteresis = <0>; >>> + type = "critical"; >>> + }; >>> + }; >>> + cooling-maps { >>> + }; >>> + }; >>> + }; >>> + >> This is fine with me. Checking the other patches in the series. >> >>> soc { >>> compatible = "simple-bus"; >>> #address-cells = <1>; >>> -- >>> 1.7.9.5 >>> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] ARM: dts: bcm283x: Add critical thermal zone for GPU 2017-02-08 9:56 ` Stefan Wahren @ 2017-02-08 19:50 ` Eric Anholt 2017-02-09 17:48 ` Stefan Wahren 0 siblings, 1 reply; 9+ messages in thread From: Eric Anholt @ 2017-02-08 19:50 UTC (permalink / raw) To: Stefan Wahren, Eduardo Valentin Cc: Zhang Rui, kernel, Rob Herring, Frank Rowand, Florian Fainelli, linux-rpi-kernel, devicetree, linux-pm [-- Attachment #1: Type: text/plain, Size: 1478 bytes --] Stefan Wahren <stefan.wahren@i2se.com> writes: > Am 08.02.2017 um 05:23 schrieb Eduardo Valentin: >> On Tue, Feb 07, 2017 at 08:19:31PM -0800, Eduardo Valentin wrote: >>> On Sat, Feb 04, 2017 at 02:16:27PM +0000, Stefan Wahren wrote: >>>> As suggested by Eduardo Valentin this adds the thermal zone for >>>> the bcm2835 SoC. Since we currently don't have any cooling devices >>>> leave this section empty. >>>> >>>> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> >>>> --- >>>> arch/arm/boot/dts/bcm283x.dtsi | 19 +++++++++++++++++++ >>>> 1 file changed, 19 insertions(+) >>>> >>>> diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi >>>> index 9c7ec7e..359da9d 100644 >>>> --- a/arch/arm/boot/dts/bcm283x.dtsi >>>> +++ b/arch/arm/boot/dts/bcm283x.dtsi >>>> @@ -19,6 +19,25 @@ >>>> bootargs = "earlyprintk console=ttyAMA0"; >>>> }; >>>> >>>> + thermal-zones { >>>> + gpu_thermal: gpu-thermal { >>>> + polling-delay-passive = <0>; >>>> + polling-delay = <1000>; >>>> + >>>> + thermal-sensors = <&thermal>; >> Just came to my mind, dont you need to have an id to specify with sensor >> points to gpu? > > Sorry, i don't know the exact setup of the single thermal sensor on the > SoC (datasheet doesn't provide any helpful information). I adapted the > Renesas R-Car thermal binding because i think it would be the best match. > > @Eric: What's your opinion? I don't understand the question. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 832 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] ARM: dts: bcm283x: Add critical thermal zone for GPU 2017-02-08 19:50 ` Eric Anholt @ 2017-02-09 17:48 ` Stefan Wahren [not found] ` <124007607.358509.1486662532562-7tX72C7vayboQLBSYMtkGA@public.gmane.org> 0 siblings, 1 reply; 9+ messages in thread From: Stefan Wahren @ 2017-02-09 17:48 UTC (permalink / raw) To: Eric Anholt, Eduardo Valentin Cc: Frank Rowand, kernel, Zhang Rui, Rob Herring, Florian Fainelli, linux-rpi-kernel, linux-pm, devicetree Hi Eric, > Eric Anholt <eric@anholt.net> hat am 8. Februar 2017 um 20:50 geschrieben: > > > Stefan Wahren <stefan.wahren@i2se.com> writes: > > > Am 08.02.2017 um 05:23 schrieb Eduardo Valentin: > >> On Tue, Feb 07, 2017 at 08:19:31PM -0800, Eduardo Valentin wrote: > >>> On Sat, Feb 04, 2017 at 02:16:27PM +0000, Stefan Wahren wrote: > >>>> As suggested by Eduardo Valentin this adds the thermal zone for > >>>> the bcm2835 SoC. Since we currently don't have any cooling devices > >>>> leave this section empty. > >>>> > >>>> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > >>>> --- > >>>> arch/arm/boot/dts/bcm283x.dtsi | 19 +++++++++++++++++++ > >>>> 1 file changed, 19 insertions(+) > >>>> > >>>> diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi > >>>> index 9c7ec7e..359da9d 100644 > >>>> --- a/arch/arm/boot/dts/bcm283x.dtsi > >>>> +++ b/arch/arm/boot/dts/bcm283x.dtsi > >>>> @@ -19,6 +19,25 @@ > >>>> bootargs = "earlyprintk console=ttyAMA0"; > >>>> }; > >>>> > >>>> + thermal-zones { > >>>> + gpu_thermal: gpu-thermal { > >>>> + polling-delay-passive = <0>; > >>>> + polling-delay = <1000>; > >>>> + > >>>> + thermal-sensors = <&thermal>; > >> Just came to my mind, dont you need to have an id to specify with sensor > >> points to gpu? > > > > Sorry, i don't know the exact setup of the single thermal sensor on the > > SoC (datasheet doesn't provide any helpful information). I adapted the > > Renesas R-Car thermal binding because i think it would be the best match. > > > > @Eric: What's your opinion? > > I don't understand the question. i hope to get it right. We are talking about defining the thermal zone [1]. There are 4 examples: (a) - CPU thermal zone with one internal sensor (b) - IC with several internal sensors (c) - Several sensors within one single thermal zone (d) - Board thermal I decided to choose (a) for the patch and Eduardo tends to (b). Here are the questions: Where is the thermal sensor TSENS located (ARM core or VideoCore 4)? Do we expect several internal sensors? [1] - http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/thermal/thermal.txt ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <124007607.358509.1486662532562-7tX72C7vayboQLBSYMtkGA@public.gmane.org>]
* Re: [PATCH 2/2] ARM: dts: bcm283x: Add critical thermal zone for GPU [not found] ` <124007607.358509.1486662532562-7tX72C7vayboQLBSYMtkGA@public.gmane.org> @ 2017-02-09 23:34 ` Eric Anholt 0 siblings, 0 replies; 9+ messages in thread From: Eric Anholt @ 2017-02-09 23:34 UTC (permalink / raw) To: Stefan Wahren, Eduardo Valentin Cc: Frank Rowand, kernel-TqfNSX0MhmxHKSADF0wUEw, Zhang Rui, Rob Herring, Florian Fainelli, linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-pm-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA [-- Attachment #1: Type: text/plain, Size: 2564 bytes --] Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org> writes: > Hi Eric, > >> Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org> hat am 8. Februar 2017 um 20:50 geschrieben: >> >> >> Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org> writes: >> >> > Am 08.02.2017 um 05:23 schrieb Eduardo Valentin: >> >> On Tue, Feb 07, 2017 at 08:19:31PM -0800, Eduardo Valentin wrote: >> >>> On Sat, Feb 04, 2017 at 02:16:27PM +0000, Stefan Wahren wrote: >> >>>> As suggested by Eduardo Valentin this adds the thermal zone for >> >>>> the bcm2835 SoC. Since we currently don't have any cooling devices >> >>>> leave this section empty. >> >>>> >> >>>> Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org> >> >>>> --- >> >>>> arch/arm/boot/dts/bcm283x.dtsi | 19 +++++++++++++++++++ >> >>>> 1 file changed, 19 insertions(+) >> >>>> >> >>>> diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi >> >>>> index 9c7ec7e..359da9d 100644 >> >>>> --- a/arch/arm/boot/dts/bcm283x.dtsi >> >>>> +++ b/arch/arm/boot/dts/bcm283x.dtsi >> >>>> @@ -19,6 +19,25 @@ >> >>>> bootargs = "earlyprintk console=ttyAMA0"; >> >>>> }; >> >>>> >> >>>> + thermal-zones { >> >>>> + gpu_thermal: gpu-thermal { >> >>>> + polling-delay-passive = <0>; >> >>>> + polling-delay = <1000>; >> >>>> + >> >>>> + thermal-sensors = <&thermal>; >> >> Just came to my mind, dont you need to have an id to specify with sensor >> >> points to gpu? >> > >> > Sorry, i don't know the exact setup of the single thermal sensor on the >> > SoC (datasheet doesn't provide any helpful information). I adapted the >> > Renesas R-Car thermal binding because i think it would be the best match. >> > >> > @Eric: What's your opinion? >> >> I don't understand the question. > > i hope to get it right. We are talking about defining the thermal zone [1]. > > There are 4 examples: > > (a) - CPU thermal zone with one internal sensor > (b) - IC with several internal sensors > (c) - Several sensors within one single thermal zone > (d) - Board thermal > > I decided to choose (a) for the patch and Eduardo tends to (b). > > Here are the questions: > > Where is the thermal sensor TSENS located (ARM core or VideoCore 4)? > > Do we expect several internal sensors? There is only one temperature sensor on the chip, and no others on the board that I know of. The docs for tsens don't say if the actual sensor is closer to the center of the ARM or some VC4 component within the chip. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 832 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] dt-bindings: Add thermal zone to bcm2835-thermal example 2017-02-04 14:16 ` [PATCH 1/2] dt-bindings: Add thermal zone to bcm2835-thermal example Stefan Wahren 2017-02-04 14:16 ` [PATCH 2/2] ARM: dts: bcm283x: Add critical thermal zone for GPU Stefan Wahren @ 2017-02-08 22:02 ` Rob Herring 1 sibling, 0 replies; 9+ messages in thread From: Rob Herring @ 2017-02-08 22:02 UTC (permalink / raw) To: Stefan Wahren Cc: Eduardo Valentin, Zhang Rui, kernel, Eric Anholt, Frank Rowand, Florian Fainelli, linux-rpi-kernel, devicetree, linux-pm On Sat, Feb 04, 2017 at 02:16:26PM +0000, Stefan Wahren wrote: > Add a thermal zone in order to make the example complete. > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > --- > .../bindings/thermal/brcm,bcm2835-thermal.txt | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2017-02-09 23:34 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <E0A4388D-788A-40B4-9193-36FD75284654@martin.sperl.org>
2017-02-04 14:16 ` [PATCH 1/2] dt-bindings: Add thermal zone to bcm2835-thermal example Stefan Wahren
2017-02-04 14:16 ` [PATCH 2/2] ARM: dts: bcm283x: Add critical thermal zone for GPU Stefan Wahren
[not found] ` <1486217787-15703-2-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org>
2017-02-08 4:19 ` Eduardo Valentin
[not found] ` <20170208041929.GA6809-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2017-02-08 4:23 ` Eduardo Valentin
[not found] ` <20170208042351.GB6809-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2017-02-08 9:56 ` Stefan Wahren
2017-02-08 19:50 ` Eric Anholt
2017-02-09 17:48 ` Stefan Wahren
[not found] ` <124007607.358509.1486662532562-7tX72C7vayboQLBSYMtkGA@public.gmane.org>
2017-02-09 23:34 ` Eric Anholt
2017-02-08 22:02 ` [PATCH 1/2] dt-bindings: Add thermal zone to bcm2835-thermal example Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).