From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Lunn Subject: Re: [PATCH] ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS Date: Sun, 12 Feb 2017 01:40:31 +0100 Message-ID: <20170212004031.GA7328@lunn.ch> References: <1486805073-15534-1-git-send-email-w@1wt.eu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1486805073-15534-1-git-send-email-w-K+wRfnb2/UA@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Willy Tarreau Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Jason Cooper , Gregory Clement , Thomas Petazzoni , Arnaud Ebalard List-Id: devicetree@vger.kernel.org > + serial@12000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins>; > + status = "okay"; > + }; > + > + serial@12100 { > + /* A PIC16F1829 is connected to uart1 at 115200 bps, > + * and takes single-character orders : > + * "1" : power off Hi Willy The qnap-poweroff.c driver will support this. You need a new compatible string, since 115200 is not the speed the current synology devices use. > + * "2" : short beep > + * "3" : long beep > + * "4" : turn the power LED ON > + * "5" : flash the power LED > + * "6" : turn the power LED OFF > + * "7" : turn the status LED OFF > + * "8" : turn the status LED ON > + * "9" : flash the status LED > + * "A" : flash the motherboard LED (D8) > + * "B" : turn the motherboard LED OFF > + * "C" : hard reset > + */ > + pinctrl-names = "default"; > + pinctrl-0 = <&uart1_pins>; > + status = "okay"; > + }; > + gpio-leds { > + compatible = "gpio-leds"; > + > + /* The greed part is on gpio0.20 which is also used by green? Reviewed-by: Andrew Lunn Andrew -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html