From mboxrd@z Thu Jan 1 00:00:00 1970 From: Corentin Labbe Subject: [PATCH 09/21] ARM: dts: sun8i: Enable dwmac-sun8i on the Banana Pi M2+ Date: Thu, 16 Feb 2017 13:48:47 +0100 Message-ID: <20170216124859.14346-10-clabbe.montjoie@gmail.com> References: <20170216124859.14346-1-clabbe.montjoie@gmail.com> Reply-To: clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org In-Reply-To: <20170216124859.14346-1-clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: peppe.cavallaro-qxv4g6HH51o@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, wens-jdAy2FN1RRM@public.gmane.org, linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org, catalin.marinas-5wv7dgnIgG8@public.gmane.org, will.deacon-5wv7dgnIgG8@public.gmane.org, alexandre.torgue-qxv4g6HH51o@public.gmane.org Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, LABBE Corentin List-Id: devicetree@vger.kernel.org From: LABBE Corentin The dwmac-sun8i hardware is present on the Banana Pi M2+ It uses an external PHY rtl8211e via RGMII. This patch create the needed regulator, emac and phy nodes. Signed-off-by: Corentin Labbe --- arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 38 +++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index c0c49dd..a4f7b99 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -91,6 +91,18 @@ pinctrl-0 = <&wifi_en_bpi_m2p>; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_orangepi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; }; &ehci1 { @@ -187,3 +199,29 @@ /* USB VBUS is on as long as VCC-IO is on */ status = "okay"; }; + +&pio { + gmac_power_pin_orangepi: gmac_power_pin@0 { + allwinner,pins = "PD6"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + reg = <0>; + }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +}; -- 2.10.2