From mboxrd@z Thu Jan 1 00:00:00 1970 From: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Subject: [PATCH] ARM: dts: sun8i-h3: Add mmc2 node to the X2 Date: Mon, 20 Feb 2017 17:22:18 +0100 Message-ID: <20170220162218.22068-1-codekipper@gmail.com> Reply-To: codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Marcus Cooper List-Id: devicetree@vger.kernel.org From: Marcus Cooper The Beelink X2 has an on-board eMMC so add a node enabling the mmc2 controller. Signed-off-by: Marcus Cooper --- arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 25b225b7dfd6..04b04fb99a51 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -138,6 +138,16 @@ }; }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + &ohci1 { status = "okay"; }; -- 2.11.1