From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Miller Subject: Re: [PATCH v1.1] net: emac: add support for device-tree based PHY discovery and setup Date: Wed, 22 Feb 2017 15:37:35 -0500 (EST) Message-ID: <20170222.153735.1289514443979947868.davem@davemloft.net> References: <2109609d-c6a7-5c6f-d6aa-657107765778@gmail.com> Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: chunkeey-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, ivan-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org, f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, andrew-g2DYL2Zd6BY@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org List-Id: devicetree@vger.kernel.org From: Christian Lamparter Date: Mon, 20 Feb 2017 20:10:58 +0100 > This patch adds glue-code that allows the EMAC driver to interface > with the existing dt-supported PHYs in drivers/net/phy. > > Because currently, the emac driver maintains a small library of > supported phys for in a private phy.c file located in the drivers > directory. > > The support is limited to mostly single ethernet transceiver like the: > CIS8201, BCM5248, ET1011C, Marvell 88E1111 and 88E1112, AR8035. > > However, routers like the Netgear WNDR4700 and Cisco Meraki MX60(W) > have a 5-port switch (AR8327N) attached to the EMAC. The switch chip > is supported by the qca8k mdio driver, which uses the generic phy > library. Another reason is that PHYLIB also supports the BCM54610, > which was used for the Western Digital My Book Live. > > This will now also make EMAC select PHYLIB. > > Signed-off-by: Christian Lamparter Applied, thanks. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html