* [PATCH 0/4] ARM: dts: Add Parvus Duracor C310 board support
@ 2017-02-19 20:27 Priit Laes
2017-02-19 20:27 ` [PATCH 1/4] arm: defconfig: imx6: Added CONFIG_FHANDLE Priit Laes
` (3 more replies)
0 siblings, 4 replies; 13+ messages in thread
From: Priit Laes @ 2017-02-19 20:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Russell King, Shawn Guo, Sascha Hauer,
Fabio Estevam, Thierry Reding, Heiko Stuebner,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Priit Laes
Add basic devicetree files for Parvus Duracor C310 which is a custom
carrier with MXM3 connector for SMARC module.
SMARC module used in C310 is manufactured by Kontron AG.
Priit Laes (4):
arm: defconfig: imx6: Added CONFIG_FHANDLE
devicetree: Add vendor prefix for Kontron AG
arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module
arm: dts: imx: Basic board definition for Parvus Duracor C310
.../devicetree/bindings/vendor-prefixes.txt | 3 +-
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-parvus-duracor-310.dts | 119 ++++++
arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi | 434 +++++++++++++++++++++
arch/arm/configs/imx_v6_v7_defconfig | 1 +
5 files changed, 557 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/imx6q-parvus-duracor-310.dts
create mode 100644 arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 13+ messages in thread* [PATCH 1/4] arm: defconfig: imx6: Added CONFIG_FHANDLE 2017-02-19 20:27 [PATCH 0/4] ARM: dts: Add Parvus Duracor C310 board support Priit Laes @ 2017-02-19 20:27 ` Priit Laes 2017-03-13 8:41 ` Shawn Guo 2017-02-19 20:27 ` [PATCH 2/4] devicetree: Add vendor prefix for Kontron AG Priit Laes ` (2 subsequent siblings) 3 siblings, 1 reply; 13+ messages in thread From: Priit Laes @ 2017-02-19 20:27 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Russell King, Shawn Guo, Sascha Hauer, Fabio Estevam, Thierry Reding, Heiko Stuebner, devicetree, linux-kernel, linux-arm-kernel Cc: Priit Laes CONFIG_FHANDLE is a must-have for newer distributions with systemd support (including Debian stable). Signed-off-by: Priit Laes <plaes@plaes.org> --- arch/arm/configs/imx_v6_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index cbe7faf..701db9a 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -1,5 +1,6 @@ CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y +CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y -- 2.9.3 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH 1/4] arm: defconfig: imx6: Added CONFIG_FHANDLE 2017-02-19 20:27 ` [PATCH 1/4] arm: defconfig: imx6: Added CONFIG_FHANDLE Priit Laes @ 2017-03-13 8:41 ` Shawn Guo 0 siblings, 0 replies; 13+ messages in thread From: Shawn Guo @ 2017-03-13 8:41 UTC (permalink / raw) To: Priit Laes Cc: Mark Rutland, devicetree, Heiko Stuebner, Russell King, linux-kernel, Rob Herring, Sascha Hauer, Fabio Estevam, Thierry Reding, linux-arm-kernel On Sun, Feb 19, 2017 at 10:27:58PM +0200, Priit Laes wrote: > CONFIG_FHANDLE is a must-have for newer distributions with systemd > support (including Debian stable). > > Signed-off-by: Priit Laes <plaes@plaes.org> 'ARM: imx_v6_v7_defconfig: ...' for subject prefix. Shawn > --- > arch/arm/configs/imx_v6_v7_defconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig > index cbe7faf..701db9a 100644 > --- a/arch/arm/configs/imx_v6_v7_defconfig > +++ b/arch/arm/configs/imx_v6_v7_defconfig > @@ -1,5 +1,6 @@ > CONFIG_KERNEL_LZO=y > CONFIG_SYSVIPC=y > +CONFIG_FHANDLE=y > CONFIG_NO_HZ=y > CONFIG_HIGH_RES_TIMERS=y > CONFIG_IKCONFIG=y > -- > 2.9.3 > ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 2/4] devicetree: Add vendor prefix for Kontron AG 2017-02-19 20:27 [PATCH 0/4] ARM: dts: Add Parvus Duracor C310 board support Priit Laes 2017-02-19 20:27 ` [PATCH 1/4] arm: defconfig: imx6: Added CONFIG_FHANDLE Priit Laes @ 2017-02-19 20:27 ` Priit Laes 2017-02-27 19:00 ` Rob Herring 2017-02-19 20:28 ` [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module Priit Laes [not found] ` <20170219202801.2082-1-plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> 3 siblings, 1 reply; 13+ messages in thread From: Priit Laes @ 2017-02-19 20:27 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Russell King, Shawn Guo, Sascha Hauer, Fabio Estevam, Thierry Reding, Heiko Stuebner, devicetree, linux-kernel, linux-arm-kernel Cc: Priit Laes Kontron AG is a German-based company designing and manufacturing embedded modules, computers and systems. Signed-off-by: Priit Laes <plaes@plaes.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 16d3b5e..4dca895 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -154,7 +154,8 @@ jedec JEDEC Solid State Technology Association karo Ka-Ro electronics GmbH keithkoep Keith & Koep GmbH keymile Keymile GmbH -kinetic Kinetic Technologies +kinetic Kinetic Technologies +kontron Kontron AG kosagi Sutajio Ko-Usagi PTE Ltd. kyo Kyocera Corporation lacie LaCie -- 2.9.3 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH 2/4] devicetree: Add vendor prefix for Kontron AG 2017-02-19 20:27 ` [PATCH 2/4] devicetree: Add vendor prefix for Kontron AG Priit Laes @ 2017-02-27 19:00 ` Rob Herring 0 siblings, 0 replies; 13+ messages in thread From: Rob Herring @ 2017-02-27 19:00 UTC (permalink / raw) To: Priit Laes Cc: Mark Rutland, devicetree, Heiko Stuebner, Russell King, linux-kernel, Sascha Hauer, Fabio Estevam, Thierry Reding, Shawn Guo, linux-arm-kernel On Sun, Feb 19, 2017 at 10:27:59PM +0200, Priit Laes wrote: > Kontron AG is a German-based company designing and manufacturing > embedded modules, computers and systems. > > Signed-off-by: Priit Laes <plaes@plaes.org> > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 16d3b5e..4dca895 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -154,7 +154,8 @@ jedec JEDEC Solid State Technology Association > karo Ka-Ro electronics GmbH > keithkoep Keith & Koep GmbH > keymile Keymile GmbH > -kinetic Kinetic Technologies > +kinetic Kinetic Technologies No doubt this needs re-formatting, but don't do that in this patch. > +kontron Kontron AG > kosagi Sutajio Ko-Usagi PTE Ltd. > kyo Kyocera Corporation > lacie LaCie > -- > 2.9.3 > ^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module 2017-02-19 20:27 [PATCH 0/4] ARM: dts: Add Parvus Duracor C310 board support Priit Laes 2017-02-19 20:27 ` [PATCH 1/4] arm: defconfig: imx6: Added CONFIG_FHANDLE Priit Laes 2017-02-19 20:27 ` [PATCH 2/4] devicetree: Add vendor prefix for Kontron AG Priit Laes @ 2017-02-19 20:28 ` Priit Laes 2017-02-28 23:06 ` Rob Herring [not found] ` <20170219202801.2082-4-plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> [not found] ` <20170219202801.2082-1-plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> 3 siblings, 2 replies; 13+ messages in thread From: Priit Laes @ 2017-02-19 20:28 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Russell King, Shawn Guo, Sascha Hauer, Fabio Estevam, Thierry Reding, Heiko Stuebner, devicetree, linux-kernel, linux-arm-kernel Cc: Priit Laes SMARC-sAMX6i is a SMARC (Smart Mobility Architecture) compliant module. Signed-off-by: Priit Laes <plaes@plaes.org> --- arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi | 434 ++++++++++++++++++++++++++++++ 1 file changed, 434 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi diff --git a/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi new file mode 100644 index 0000000..e3d7a35 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi @@ -0,0 +1,434 @@ +/* + * Copyright 2017 Priit Laes <plaes@plaes.org> + * + * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#include "imx6q.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + /* TODO: Figure out proper name for this model... */ + model = "Kontron SMARC-sAMX6i module"; + compatible = "kontron,imx6-smx6", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3v3_s5: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "V_3V3_S5"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1v8_s5: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "V_1V8_S5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3v3_s0: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "V_3V3_S0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1v0_s0: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "V_1V0_S0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + + i2c_pfuze: i2c-gpio-0 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio_0>; + gpios = + <&gpio1 28 0>, // sda + <&gpio1 30 0>; // scl + #address-cells = <1>; + #size-cells = <0>; + i2c-gpio,delay-us = <2>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_smarc>; + phy-mode = "rgmii"; + status = "disabled"; +}; + +&i2c_pfuze { + pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + reg_v_core_s0: sw1ab { + regulator-name = "V_CORE_S0"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vddsoc_s0: sw1c { + regulator-name = "V_VDDSOC_S0"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3v15_s0: sw2 { + regulator-name = "V_3V15_S0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* sw3a/b is used in dual mode, but driver does not + * support it? Although, there's no need to control + * DDR power - so just leaving dummy entries for sw3a + * and sw3b for now. + */ + sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1v8_s0: sw4 { + regulator-name = "V_1V8_S0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* Regulator for USB */ + reg_5v0_s0: swbst { + regulator-name = "V_5V0_S0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + }; + + reg_vsnvs: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + /* Per schematics, of all VGEN's, only VGEN5 has some + * usage ... but even that - over DNI resistor + */ + vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + reg_2v5_s0: vgen5 { + regulator-name = "V_2V5_S0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_smarc>; + fsl,uart-has-rtscts; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_smarc>; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_smarc>; + fsl,uart-has-rtscts; + status = "disabled"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_smarc>; + status = "disabled"; +}; + +&usbotg { + /* + * no 'imx6-usb-charger-detection' + * since USB_OTG_CHD_B pin is not wired + */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "disabled"; +}; + +&usbh1 { + vbus-supply = <®_5v0_s0>; + status = "disabled"; +}; + +&usdhc4 { + /* Internal eMMC, optional on some boards */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "disabled"; +}; + +&iomuxc { + pinctrl_flexcan1: flexcan1-smarc { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x80000000 + >; + }; + + pinctrl_flexcan2: flexcan2-smarc { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000 + >; + }; + + pinctrl_enet_smarc: fecgrp-smarc { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + >; + }; + + pinctrl_i2c_gpio_0: i2c-gpio-0-smarc { + fsl,pins = < + /* SCL GPIO */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 + /* SDA GPIO */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 + >; + }; + + pinctrl_i2c3: i2c3-smarc { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pcie-smarc { + fsl,pins = < + /* RST_PCIE_A# */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 + /* PCIE_WAKE# */ + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x80000000 + >; + }; + + pinctrl_uart1_smarc: uart1grp-smarc { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart2_smarc: uart2grp-smarc { + fsl,pins = < + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4_smarc: uart4grp-smarc { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5_smarc: uart5grp-smarc { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotg-grp-smarc { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0 + /* TODO: Comment out power and OC gpio's for now, since + * these are not used by driver + */ + /* USB power */ + // MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x80000000 + /* USB OC */ + // MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x80000000 + >; + }; + + pinctrl_usdhc4: usdhc4grp-smarc { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; +}; -- 2.9.3 ^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module 2017-02-19 20:28 ` [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module Priit Laes @ 2017-02-28 23:06 ` Rob Herring 2017-02-28 23:10 ` Russell King - ARM Linux [not found] ` <20170219202801.2082-4-plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> 1 sibling, 1 reply; 13+ messages in thread From: Rob Herring @ 2017-02-28 23:06 UTC (permalink / raw) To: Priit Laes Cc: Mark Rutland, devicetree@vger.kernel.org, Heiko Stuebner, Russell King, linux-kernel@vger.kernel.org, Sascha Hauer, Fabio Estevam, Thierry Reding, Shawn Guo, linux-arm-kernel@lists.infradead.org On Sun, Feb 19, 2017 at 2:28 PM, Priit Laes <plaes@plaes.org> wrote: > SMARC-sAMX6i is a SMARC (Smart Mobility Architecture) compliant > module. > > Signed-off-by: Priit Laes <plaes@plaes.org> > --- > arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi | 434 ++++++++++++++++++++++++++++++ > 1 file changed, 434 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi > > diff --git a/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi > new file mode 100644 > index 0000000..e3d7a35 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi > @@ -0,0 +1,434 @@ > +/* > + * Copyright 2017 Priit Laes <plaes@plaes.org> > + * > + * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. Use SPDX tags here: SPDX-License-Identifier: (GPL-2.0+ OR MIT) While it says X11, this is really MIT license text. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module 2017-02-28 23:06 ` Rob Herring @ 2017-02-28 23:10 ` Russell King - ARM Linux 2017-02-28 23:49 ` Rob Herring 0 siblings, 1 reply; 13+ messages in thread From: Russell King - ARM Linux @ 2017-02-28 23:10 UTC (permalink / raw) To: Rob Herring Cc: Mark Rutland, devicetree@vger.kernel.org, Priit Laes, Heiko Stuebner, linux-kernel@vger.kernel.org, Sascha Hauer, Fabio Estevam, Thierry Reding, Shawn Guo, linux-arm-kernel@lists.infradead.org On Tue, Feb 28, 2017 at 05:06:02PM -0600, Rob Herring wrote: > On Sun, Feb 19, 2017 at 2:28 PM, Priit Laes <plaes@plaes.org> wrote: > > SMARC-sAMX6i is a SMARC (Smart Mobility Architecture) compliant > > module. > > > > Signed-off-by: Priit Laes <plaes@plaes.org> > > --- > > arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi | 434 ++++++++++++++++++++++++++++++ > > 1 file changed, 434 insertions(+) > > create mode 100644 arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi > > > > diff --git a/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi > > new file mode 100644 > > index 0000000..e3d7a35 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi > > @@ -0,0 +1,434 @@ > > +/* > > + * Copyright 2017 Priit Laes <plaes@plaes.org> > > + * > > + * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru> > > + * > > + * This file is dual-licensed: you can use it either under the terms > > + * of the GPL or the X11 license, at your option. Note that this dual > > + * licensing only applies to this file, and not this project as a > > + * whole. > > + * > > + * a) This file is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation; either version 2 of > > + * the License, or (at your option) any later version. > > + * > > + * This file is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * Or, alternatively, > > + * > > + * b) Permission is hereby granted, free of charge, to any person > > + * obtaining a copy of this software and associated documentation > > + * files (the "Software"), to deal in the Software without > > + * restriction, including without limitation the rights to use, > > + * copy, modify, merge, publish, distribute, sublicense, and/or > > + * sell copies of the Software, and to permit persons to whom the > > + * Software is furnished to do so, subject to the following > > + * conditions: > > + * > > + * The above copyright notice and this permission notice shall be > > + * included in all copies or substantial portions of the Software. > > + * > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > > + * OTHER DEALINGS IN THE SOFTWARE. > > Use SPDX tags here: > > SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > While it says X11, this is really MIT license text. No. Read the FSF's page on licenses: X11 License (#X11License) ... This license is sometimes called the MIT license, but that term is misleading, since MIT has used many licenses for software. Never use the term "MIT license", it's ambiguous, and I doubt that such a term (given the above) would stand up in a court of law as identifying any particular license. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module 2017-02-28 23:10 ` Russell King - ARM Linux @ 2017-02-28 23:49 ` Rob Herring 2017-03-01 0:20 ` Russell King - ARM Linux 0 siblings, 1 reply; 13+ messages in thread From: Rob Herring @ 2017-02-28 23:49 UTC (permalink / raw) To: Russell King - ARM Linux Cc: Mark Rutland, devicetree@vger.kernel.org, Priit Laes, Heiko Stuebner, linux-kernel@vger.kernel.org, Sascha Hauer, Fabio Estevam, Thierry Reding, Shawn Guo, linux-arm-kernel@lists.infradead.org On Tue, Feb 28, 2017 at 5:10 PM, Russell King - ARM Linux <linux@armlinux.org.uk> wrote: > On Tue, Feb 28, 2017 at 05:06:02PM -0600, Rob Herring wrote: >> On Sun, Feb 19, 2017 at 2:28 PM, Priit Laes <plaes@plaes.org> wrote: >> > SMARC-sAMX6i is a SMARC (Smart Mobility Architecture) compliant >> > module. >> > >> > Signed-off-by: Priit Laes <plaes@plaes.org> >> > --- >> > arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi | 434 ++++++++++++++++++++++++++++++ >> > 1 file changed, 434 insertions(+) >> > create mode 100644 arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi >> > >> > diff --git a/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi >> > new file mode 100644 >> > index 0000000..e3d7a35 >> > --- /dev/null >> > +++ b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi >> > @@ -0,0 +1,434 @@ >> > +/* >> > + * Copyright 2017 Priit Laes <plaes@plaes.org> >> > + * >> > + * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru> >> > + * >> > + * This file is dual-licensed: you can use it either under the terms >> > + * of the GPL or the X11 license, at your option. Note that this dual >> > + * licensing only applies to this file, and not this project as a >> > + * whole. >> > + * >> > + * a) This file is free software; you can redistribute it and/or >> > + * modify it under the terms of the GNU General Public License as >> > + * published by the Free Software Foundation; either version 2 of >> > + * the License, or (at your option) any later version. >> > + * >> > + * This file is distributed in the hope that it will be useful, >> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> > + * GNU General Public License for more details. >> > + * >> > + * Or, alternatively, >> > + * >> > + * b) Permission is hereby granted, free of charge, to any person >> > + * obtaining a copy of this software and associated documentation >> > + * files (the "Software"), to deal in the Software without >> > + * restriction, including without limitation the rights to use, >> > + * copy, modify, merge, publish, distribute, sublicense, and/or >> > + * sell copies of the Software, and to permit persons to whom the >> > + * Software is furnished to do so, subject to the following >> > + * conditions: >> > + * >> > + * The above copyright notice and this permission notice shall be >> > + * included in all copies or substantial portions of the Software. >> > + * >> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES >> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR >> > + * OTHER DEALINGS IN THE SOFTWARE. >> >> Use SPDX tags here: >> >> SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> >> While it says X11, this is really MIT license text. > > No. Read the FSF's page on licenses: > > X11 License (#X11License) > ... > This license is sometimes called the MIT license, but that term is > misleading, since MIT has used many licenses for software. > > Never use the term "MIT license", it's ambiguous, and I doubt that such > a term (given the above) would stand up in a court of law as identifying > any particular license. The SPDX tags have a very exact, documented meaning. That's the point. X11 means this[1]. MIT means this[2]. Rob [1] https://spdx.org/licenses/X11.html#licenseText [2] https://spdx.org/licenses/MIT.html#licenseText ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module 2017-02-28 23:49 ` Rob Herring @ 2017-03-01 0:20 ` Russell King - ARM Linux [not found] ` <20170301002048.GG21222-l+eeeJia6m9URfEZ8mYm6t73F7V6hmMc@public.gmane.org> 0 siblings, 1 reply; 13+ messages in thread From: Russell King - ARM Linux @ 2017-03-01 0:20 UTC (permalink / raw) To: Rob Herring Cc: Mark Rutland, devicetree@vger.kernel.org, Priit Laes, Heiko Stuebner, linux-kernel@vger.kernel.org, Sascha Hauer, Fabio Estevam, Thierry Reding, Shawn Guo, linux-arm-kernel@lists.infradead.org On Tue, Feb 28, 2017 at 05:49:57PM -0600, Rob Herring wrote: > On Tue, Feb 28, 2017 at 5:10 PM, Russell King - ARM Linux > <linux@armlinux.org.uk> wrote: > > On Tue, Feb 28, 2017 at 05:06:02PM -0600, Rob Herring wrote: > >> On Sun, Feb 19, 2017 at 2:28 PM, Priit Laes <plaes@plaes.org> wrote: > >> > SMARC-sAMX6i is a SMARC (Smart Mobility Architecture) compliant > >> > module. > >> > > >> > Signed-off-by: Priit Laes <plaes@plaes.org> > >> > --- > >> > arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi | 434 ++++++++++++++++++++++++++++++ > >> > 1 file changed, 434 insertions(+) > >> > create mode 100644 arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi > >> > > >> > diff --git a/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi > >> > new file mode 100644 > >> > index 0000000..e3d7a35 > >> > --- /dev/null > >> > +++ b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi > >> > @@ -0,0 +1,434 @@ > >> > +/* > >> > + * Copyright 2017 Priit Laes <plaes@plaes.org> > >> > + * > >> > + * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru> > >> > + * > >> > + * This file is dual-licensed: you can use it either under the terms > >> > + * of the GPL or the X11 license, at your option. Note that this dual > >> > + * licensing only applies to this file, and not this project as a > >> > + * whole. > >> > + * > >> > + * a) This file is free software; you can redistribute it and/or > >> > + * modify it under the terms of the GNU General Public License as > >> > + * published by the Free Software Foundation; either version 2 of > >> > + * the License, or (at your option) any later version. > >> > + * > >> > + * This file is distributed in the hope that it will be useful, > >> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > >> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > >> > + * GNU General Public License for more details. > >> > + * > >> > + * Or, alternatively, > >> > + * > >> > + * b) Permission is hereby granted, free of charge, to any person > >> > + * obtaining a copy of this software and associated documentation > >> > + * files (the "Software"), to deal in the Software without > >> > + * restriction, including without limitation the rights to use, > >> > + * copy, modify, merge, publish, distribute, sublicense, and/or > >> > + * sell copies of the Software, and to permit persons to whom the > >> > + * Software is furnished to do so, subject to the following > >> > + * conditions: > >> > + * > >> > + * The above copyright notice and this permission notice shall be > >> > + * included in all copies or substantial portions of the Software. > >> > + * > >> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > >> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > >> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > >> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > >> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > >> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > >> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > >> > + * OTHER DEALINGS IN THE SOFTWARE. > >> > >> Use SPDX tags here: > >> > >> SPDX-License-Identifier: (GPL-2.0+ OR MIT) > >> > >> While it says X11, this is really MIT license text. > > > > No. Read the FSF's page on licenses: > > > > X11 License (#X11License) > > ... > > This license is sometimes called the MIT license, but that term is > > misleading, since MIT has used many licenses for software. > > > > Never use the term "MIT license", it's ambiguous, and I doubt that such > > a term (given the above) would stand up in a court of law as identifying > > any particular license. > > The SPDX tags have a very exact, documented meaning. That's the point. > X11 means this[1]. MIT means this[2]. Meanwhile, the FSF appears to disagree, so this creates work for solicitors (or lawyers if you're in the US) to have a field day. Also, if it was _this_ easy, we would have included a web URL to point at the license text since 1992 - but we haven't because it's a level of indirection that brings with it uncertainty. Now, you could say "oh we worship the LF, we trust them, they're never going to do anything stupid, let's trust SPDX to always stay the same and exist" but IMHO that's letting emotional judgement cloud the legal issue. There's also very little discussion on spdx.org about the legal side of this stuff. So, to me, this spdx stuff looks like a programmers solution to a legal problem, looks completely untested legally, and goes against recommended practices (which are to include the copyright plus the actual notice of intent - not copyright plus a level of indirection.) As I said above, if it was this easy, we'd have been linking to (eg) fsf.org's copies of license texts for years or similar. Now, with the FSF.org's different stance on X11 vs MIT compared to spdx.org identifying "MIT" differently, I suspect that there is ample room here for solicitors/lawyers to make a great deal of cash. Another point here is... if LF and/or SPDX.org goes belly-up, or becomes unaccessible, eg, spdx.org's name registration expires and gets taken over by a rogue party - at that point, this SPDX stuff can mean _anything_. I do hope those who you've been recommending to use SPDX tags stop and think about it, and don't blindly follow what you're suggesting. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <20170301002048.GG21222-l+eeeJia6m9URfEZ8mYm6t73F7V6hmMc@public.gmane.org>]
* Re: [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module [not found] ` <20170301002048.GG21222-l+eeeJia6m9URfEZ8mYm6t73F7V6hmMc@public.gmane.org> @ 2017-03-13 22:23 ` Yang Li 0 siblings, 0 replies; 13+ messages in thread From: Yang Li @ 2017-03-13 22:23 UTC (permalink / raw) To: Russell King - ARM Linux, torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b Cc: Rob Herring, Priit Laes, Mark Rutland, Shawn Guo, Sascha Hauer, Fabio Estevam, Thierry Reding, Heiko Stuebner, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org On Tue, Feb 28, 2017 at 6:20 PM, Russell King - ARM Linux <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org> wrote: > On Tue, Feb 28, 2017 at 05:49:57PM -0600, Rob Herring wrote: >> On Tue, Feb 28, 2017 at 5:10 PM, Russell King - ARM Linux >> <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org> wrote: >> > On Tue, Feb 28, 2017 at 05:06:02PM -0600, Rob Herring wrote: >> >> On Sun, Feb 19, 2017 at 2:28 PM, Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> wrote: >> >> > SMARC-sAMX6i is a SMARC (Smart Mobility Architecture) compliant >> >> > module. >> >> > >> >> > Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> >> >> > --- >> >> > arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi | 434 ++++++++++++++++++++++++++++++ >> >> > 1 file changed, 434 insertions(+) >> >> > create mode 100644 arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi >> >> > >> >> > diff --git a/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi >> >> > new file mode 100644 >> >> > index 0000000..e3d7a35 >> >> > --- /dev/null >> >> > +++ b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi >> >> > @@ -0,0 +1,434 @@ >> >> > +/* >> >> > + * Copyright 2017 Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> >> >> > + * >> >> > + * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru> >> >> > + * >> >> > + * This file is dual-licensed: you can use it either under the terms >> >> > + * of the GPL or the X11 license, at your option. Note that this dual >> >> > + * licensing only applies to this file, and not this project as a >> >> > + * whole. >> >> > + * >> >> > + * a) This file is free software; you can redistribute it and/or >> >> > + * modify it under the terms of the GNU General Public License as >> >> > + * published by the Free Software Foundation; either version 2 of >> >> > + * the License, or (at your option) any later version. >> >> > + * >> >> > + * This file is distributed in the hope that it will be useful, >> >> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> >> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> >> > + * GNU General Public License for more details. >> >> > + * >> >> > + * Or, alternatively, >> >> > + * >> >> > + * b) Permission is hereby granted, free of charge, to any person >> >> > + * obtaining a copy of this software and associated documentation >> >> > + * files (the "Software"), to deal in the Software without >> >> > + * restriction, including without limitation the rights to use, >> >> > + * copy, modify, merge, publish, distribute, sublicense, and/or >> >> > + * sell copies of the Software, and to permit persons to whom the >> >> > + * Software is furnished to do so, subject to the following >> >> > + * conditions: >> >> > + * >> >> > + * The above copyright notice and this permission notice shall be >> >> > + * included in all copies or substantial portions of the Software. >> >> > + * >> >> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> >> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES >> >> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> >> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> >> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> >> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> >> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR >> >> > + * OTHER DEALINGS IN THE SOFTWARE. >> >> >> >> Use SPDX tags here: >> >> >> >> SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> >> >> >> While it says X11, this is really MIT license text. >> > >> > No. Read the FSF's page on licenses: >> > >> > X11 License (#X11License) >> > ... >> > This license is sometimes called the MIT license, but that term is >> > misleading, since MIT has used many licenses for software. >> > >> > Never use the term "MIT license", it's ambiguous, and I doubt that such >> > a term (given the above) would stand up in a court of law as identifying >> > any particular license. >> >> The SPDX tags have a very exact, documented meaning. That's the point. >> X11 means this[1]. MIT means this[2]. > > Meanwhile, the FSF appears to disagree, so this creates work for > solicitors (or lawyers if you're in the US) to have a field day. > > Also, if it was _this_ easy, we would have included a web URL to > point at the license text since 1992 - but we haven't because it's > a level of indirection that brings with it uncertainty. > > Now, you could say "oh we worship the LF, we trust them, they're > never going to do anything stupid, let's trust SPDX to always > stay the same and exist" but IMHO that's letting emotional > judgement cloud the legal issue. > > There's also very little discussion on spdx.org about the legal > side of this stuff. > > So, to me, this spdx stuff looks like a programmers solution to a > legal problem, looks completely untested legally, and goes against > recommended practices (which are to include the copyright plus the > actual notice of intent - not copyright plus a level of indirection.) > > As I said above, if it was this easy, we'd have been linking to > (eg) fsf.org's copies of license texts for years or similar. > > Now, with the FSF.org's different stance on X11 vs MIT compared > to spdx.org identifying "MIT" differently, I suspect that there > is ample room here for solicitors/lawyers to make a great deal > of cash. > > Another point here is... if LF and/or SPDX.org goes belly-up, or > becomes unaccessible, eg, spdx.org's name registration expires and > gets taken over by a rogue party - at that point, this SPDX stuff > can mean _anything_. > > I do hope those who you've been recommending to use SPDX tags stop > and think about it, and don't blindly follow what you're suggesting. So do we have a consensus on this topic? Right now SPDX id is rarely used in Linux kernel. A grep of SPDX in the source code only shows around 10 appearances. Whether or not changing to promote the usage of SPDX id in the future seems to be a good topic for broader discussion. And it would be good to have a kernel wide guideline as a result. I'm adding Linus Torvalds to the recipient, and hope he can provide some of his insight to the issue. Regards, Leo -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <20170219202801.2082-4-plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>]
* Re: [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module [not found] ` <20170219202801.2082-4-plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> @ 2017-03-13 11:02 ` Shawn Guo 0 siblings, 0 replies; 13+ messages in thread From: Shawn Guo @ 2017-03-13 11:02 UTC (permalink / raw) To: Priit Laes Cc: Rob Herring, Mark Rutland, Russell King, Sascha Hauer, Fabio Estevam, Thierry Reding, Heiko Stuebner, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On Sun, Feb 19, 2017 at 10:28:00PM +0200, Priit Laes wrote: > SMARC-sAMX6i is a SMARC (Smart Mobility Architecture) compliant > module. > > Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> For sake of consistency, we use 'ARM: ...' instead of 'arm: ...' in subject prefix for all i.MX patches. > --- > arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi | 434 ++++++++++++++++++++++++++++++ > 1 file changed, 434 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi > > diff --git a/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi > new file mode 100644 > index 0000000..e3d7a35 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-smarc-sam6xi.dtsi > @@ -0,0 +1,434 @@ > +/* > + * Copyright 2017 Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> > + * > + * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + * > + */ > + > +#include "imx6q.dtsi" > +#include <dt-bindings/gpio/gpio.h> > + > +/ { > + /* TODO: Figure out proper name for this model... */ > + model = "Kontron SMARC-sAMX6i module"; > + compatible = "kontron,imx6-smx6", "fsl,imx6q"; > + > + memory { > + reg = <0x10000000 0x40000000>; > + }; > + > + regulators { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <0>; Please drop this container node, and name fixed regulator in the following scheme: reg_xxx: regulator-xxx { ... }; > + > + reg_3v3_s5: regulator@0 { > + compatible = "regulator-fixed"; > + reg = <0>; > + regulator-name = "V_3V3_S5"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + reg_1v8_s5: regulator@1 { > + compatible = "regulator-fixed"; > + reg = <1>; > + regulator-name = "V_1V8_S5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + reg_3v3_s0: regulator@2 { > + compatible = "regulator-fixed"; > + reg = <2>; > + regulator-name = "V_3V3_S0"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + reg_1v0_s0: regulator@3 { > + compatible = "regulator-fixed"; > + reg = <3>; > + regulator-name = "V_1V0_S0"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + > + i2c_pfuze: i2c-gpio-0 { > + compatible = "i2c-gpio"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c_gpio_0>; > + gpios = > + <&gpio1 28 0>, // sda It doesn't seem necessary to break them into two lines. > + <&gpio1 30 0>; // scl Use polarity defines in dt-bindings/gpio/gpio.h. And use /* ... */ for comments. > + #address-cells = <1>; > + #size-cells = <0>; > + i2c-gpio,delay-us = <2>; > + }; > +}; > + > +&can1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan1>; > + status = "disabled"; > +}; > + > +&can2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_flexcan2>; > + status = "disabled"; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet_smarc>; > + phy-mode = "rgmii"; > + status = "disabled"; > +}; > + > +&i2c_pfuze { > + pfuze100@08 { > + compatible = "fsl,pfuze100"; > + reg = <0x08>; > + > + regulators { > + reg_v_core_s0: sw1ab { > + regulator-name = "V_CORE_S0"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + reg_vddsoc_s0: sw1c { > + regulator-name = "V_VDDSOC_S0"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + reg_3v15_s0: sw2 { > + regulator-name = "V_3V15_S0"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* sw3a/b is used in dual mode, but driver does not > + * support it? Although, there's no need to control > + * DDR power - so just leaving dummy entries for sw3a > + * and sw3b for now. > + */ /* * multiple line comments ... */ > + sw3a { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <1975000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + sw3b { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <1975000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + reg_1v8_s0: sw4 { > + regulator-name = "V_1V8_S0"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* Regulator for USB */ > + reg_5v0_s0: swbst { > + regulator-name = "V_5V0_S0"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5150000>; > + regulator-boot-on; > + }; > + > + reg_vsnvs: vsnvs { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <3000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + reg_vrefddr: vrefddr { > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* Per schematics, of all VGEN's, only VGEN5 has some > + * usage ... but even that - over DNI resistor > + */ > + vgen1 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + }; > + > + vgen2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + }; > + > + vgen3 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vgen4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + reg_2v5_s0: vgen5 { > + regulator-name = "V_2V5_S0"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vgen6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + }; > + }; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "disabled"; > +}; > + > +&pcie { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie>; > + wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>; Undocumented/unsupported DT property? > + reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; > + status = "disabled"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1_smarc>; > + fsl,uart-has-rtscts; Use uart-has-rtscts instead. > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2_smarc>; > + status = "disabled"; > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4_smarc>; > + fsl,uart-has-rtscts; Ditto > + status = "disabled"; > +}; > + > +&uart5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart5_smarc>; > + status = "disabled"; > +}; > + > +&usbotg { > + /* > + * no 'imx6-usb-charger-detection' > + * since USB_OTG_CHD_B pin is not wired > + */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg>; > + status = "disabled"; > +}; > + > +&usbh1 { > + vbus-supply = <®_5v0_s0>; > + status = "disabled"; > +}; > + > +&usdhc4 { > + /* Internal eMMC, optional on some boards */ > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc4>; > + bus-width = <8>; > + no-1-8-v; > + non-removable; > + status = "disabled"; > +}; > + > +&iomuxc { > + pinctrl_flexcan1: flexcan1-smarc { > + fsl,pins = < > + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x80000000 Do not use 0x80000000 to rely on the settings from reset or firmware. Use a proper configuration value. > + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x80000000 > + >; > + }; > + > + pinctrl_flexcan2: flexcan2-smarc { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000 > + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000 > + >; > + }; > + > + pinctrl_enet_smarc: fecgrp-smarc { > + fsl,pins = < > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 > + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 > + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 > + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 > + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 > + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 > + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 > + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 > + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 > + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 > + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 > + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 > + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 > + >; > + }; > + > + pinctrl_i2c_gpio_0: i2c-gpio-0-smarc { > + fsl,pins = < > + /* SCL GPIO */ > + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 > + /* SDA GPIO */ > + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 > + >; > + }; > + > + pinctrl_i2c3: i2c3-smarc { > + fsl,pins = < > + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 > + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_pcie: pcie-smarc { > + fsl,pins = < > + /* RST_PCIE_A# */ > + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 > + /* PCIE_WAKE# */ > + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x80000000 > + >; > + }; > + > + pinctrl_uart1_smarc: uart1grp-smarc { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 > + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1 > + >; > + }; > + > + pinctrl_uart2_smarc: uart2grp-smarc { > + fsl,pins = < > + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart4_smarc: uart4grp-smarc { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 > + >; > + }; > + > + pinctrl_uart5_smarc: uart5grp-smarc { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_usbotg: usbotg-grp-smarc { Please name these pinctrl node consistently. Some have 'grp' suffix, some do not, and some do it with '-grp'. Also, I'm not sure about the point of having '-smarc' suffix. > + fsl,pins = < > + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0 > + /* TODO: Comment out power and OC gpio's for now, since > + * these are not used by driver > + */ > + /* USB power */ > + // MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x80000000 > + /* USB OC */ > + // MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x80000000 Please fix the comment style. Shawn > + >; > + }; > + > + pinctrl_usdhc4: usdhc4grp-smarc { > + fsl,pins = < > + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 > + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 > + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 > + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 > + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 > + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 > + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 > + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 > + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 > + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 > + >; > + }; > +}; > -- > 2.9.3 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <20170219202801.2082-1-plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>]
* [PATCH 4/4] arm: dts: imx: Basic board definition for Parvus Duracor C310 [not found] ` <20170219202801.2082-1-plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> @ 2017-02-19 20:28 ` Priit Laes 0 siblings, 0 replies; 13+ messages in thread From: Priit Laes @ 2017-02-19 20:28 UTC (permalink / raw) To: Rob Herring, Mark Rutland, Russell King, Shawn Guo, Sascha Hauer, Fabio Estevam, Thierry Reding, Heiko Stuebner, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r Cc: Priit Laes The DuraCOR 310 is a tactical mission computer based on a low-power four-core NXP i.MX6 Quad Arm processor equipped with a rugged Flash disk and PCIe-Mini Card I/O expansion slots. Add initial board support with CAN, eMMC, I2C, PCI, SATA, UART and USB enabled. Signed-off-by: Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-parvus-duracor-310.dts | 119 +++++++++++++++++++++++++ 2 files changed, 120 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-parvus-duracor-310.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 01d178a..542375c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -397,6 +397,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-nitrogen6_max.dtb \ imx6q-nitrogen6_som2.dtb \ imx6q-novena.dtb \ + imx6q-parvus-duracor-310.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ diff --git a/arch/arm/boot/dts/imx6q-parvus-duracor-310.dts b/arch/arm/boot/dts/imx6q-parvus-duracor-310.dts new file mode 100644 index 0000000..07344ad --- /dev/null +++ b/arch/arm/boot/dts/imx6q-parvus-duracor-310.dts @@ -0,0 +1,119 @@ +/* + * Copyright 2017 Priit Laes <plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +/dts-v1/; +#include "imx6q-smarc-sam6xi.dtsi" + +/ { + model = "Parvus Duracor 310"; + compatible = "parvus-duracor,c310", "kontron,imx6-smx6", "fsl,imx6q"; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + /* CAN1 enable line */ + can1_en_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "CAN1_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /* CAN2 enable line */ + can2_en_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "CAN2_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; + +&can1 { + xceiver-supply = <&can1_en_reg>; + status = "okay"; +}; + +&can2 { + xceiver-supply = <&can2_en_reg>; + status = "okay"; +}; + +&i2c3 { + status ="okay"; + + pm_eeprom: at24@50 { + compatible = "at24,24c32"; + pagesize = <8>; + reg = <0x50>; + }; +}; + +&fec { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc4 { + /* eMMC */ + status = "okay"; +}; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 13+ messages in thread
end of thread, other threads:[~2017-03-13 22:23 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-02-19 20:27 [PATCH 0/4] ARM: dts: Add Parvus Duracor C310 board support Priit Laes
2017-02-19 20:27 ` [PATCH 1/4] arm: defconfig: imx6: Added CONFIG_FHANDLE Priit Laes
2017-03-13 8:41 ` Shawn Guo
2017-02-19 20:27 ` [PATCH 2/4] devicetree: Add vendor prefix for Kontron AG Priit Laes
2017-02-27 19:00 ` Rob Herring
2017-02-19 20:28 ` [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module Priit Laes
2017-02-28 23:06 ` Rob Herring
2017-02-28 23:10 ` Russell King - ARM Linux
2017-02-28 23:49 ` Rob Herring
2017-03-01 0:20 ` Russell King - ARM Linux
[not found] ` <20170301002048.GG21222-l+eeeJia6m9URfEZ8mYm6t73F7V6hmMc@public.gmane.org>
2017-03-13 22:23 ` Yang Li
[not found] ` <20170219202801.2082-4-plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
2017-03-13 11:02 ` Shawn Guo
[not found] ` <20170219202801.2082-1-plaes-q/aMd4JkU83YtjvyW6yDsg@public.gmane.org>
2017-02-19 20:28 ` [PATCH 4/4] arm: dts: imx: Basic board definition for Parvus Duracor C310 Priit Laes
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).