devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
To: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: "Benoît Cousson"
	<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	"Marcel Partap" <mpartap-hi6Y0CQ0nG0@public.gmane.org>,
	"Michael Scott"
	<michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	"Sebastian Reichel" <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Subject: [PATCH 3/6] ARM: dts: omap4-droid4: Add GPIO poweroff
Date: Sat,  4 Mar 2017 21:43:56 -0800	[thread overview]
Message-ID: <20170305054359.8293-4-tony@atomide.com> (raw)
In-Reply-To: <20170305054359.8293-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>

Droid 4 has a GPIO line that we can use with CONFIG_POWER_RESET_GPIO.
It is probably connected to the CPCAP PMIC, and seems to power down
the whole device taking power consumption to zero based on what
I measured.

Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Marcel Partap <mpartap-hi6Y0CQ0nG0@public.gmane.org>
Cc: Michael Scott <michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
 arch/arm/boot/dts/omap4-droid4-xt894.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -27,6 +27,14 @@
 		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
 	};
 
+	/* Poweroff GPIO probably connected to CPCAP */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff_gpio>;
+		pinctrl-names = "default";
+		gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;	/* gpio50 */
+	};
+
 	/* This is probably coming straight from the battery.. */
 	wl12xx_vmmc: regulator-wl12xx {
 		compatible = "regulator-fixed";
@@ -226,6 +234,14 @@
 };
 
 &omap4_pmx_core {
+
+	/* gpmc_ncs0.gpio_50 */
+	poweroff_gpio: pinmux_poweroff_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
 	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
 		/* gpio_60 */
 		pinctrl-single,pins = <
-- 
2.11.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-03-05  5:43 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-05  5:43 [PATCH 0/6] Device tree changes to add more droid 4 devices Tony Lindgren
     [not found] ` <20170305054359.8293-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-05  5:43   ` [PATCH 1/6] ARM: dts: omap4-droid4: Add touchscreen Tony Lindgren
2017-03-05  5:43   ` [PATCH 2/6] ARM: dts: omap4-droid4: Add LCD backlight Tony Lindgren
     [not found]     ` <20170305054359.8293-3-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-05 23:24       ` Kim, Milo
2017-03-19  1:18       ` Sebastian Reichel
2017-03-20  2:30         ` Kim, Milo
2017-03-05  5:43   ` Tony Lindgren [this message]
     [not found]     ` <20170305054359.8293-4-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-19  1:19       ` [PATCH 3/6] ARM: dts: omap4-droid4: Add GPIO poweroff Sebastian Reichel
2017-03-05  5:43   ` [PATCH 4/6] ARM: dts: omap4-droid4: Add tmp105 sensor for droid 4 Tony Lindgren
     [not found]     ` <20170305054359.8293-5-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-19  1:26       ` Sebastian Reichel
2017-03-05  5:43   ` [PATCH 5/6] ARM: dts: omap4-droid4: Add HDMI support Tony Lindgren
     [not found]     ` <20170305054359.8293-6-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-16 22:43       ` Sebastian Reichel
2017-03-05  5:43   ` [PATCH 6/6] ARM: dts: omap4-droid4: Add LCD Tony Lindgren
     [not found]     ` <20170305054359.8293-7-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-19  1:29       ` Sebastian Reichel
2017-03-19 16:10         ` Tony Lindgren
     [not found]           ` <20170319161030.GA20572-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-03-19 22:55             ` Sebastian Reichel
2017-03-20  7:52               ` Tomi Valkeinen
     [not found]                 ` <9c4a5d88-4d2a-2120-9fdf-f3fbba69147c-l0cyMroinI0@public.gmane.org>
2017-03-23  6:31                   ` Sebastian Reichel
2017-03-23  7:08                     ` Tomi Valkeinen
     [not found]                       ` <b4666cd6-9925-6143-41c3-591e68c48456-l0cyMroinI0@public.gmane.org>
2017-03-23  8:42                         ` Sebastian Reichel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170305054359.8293-4-tony@atomide.com \
    --to=tony-4v6ys6ai5vpbdgjk7y7tuq@public.gmane.org \
    --cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=michael.scott-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=mpartap-hi6Y0CQ0nG0@public.gmane.org \
    --cc=sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).