From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Subject: Re: [PATCH 3/5] ARM: dts: am4372: Update operating-points-v2 table for cpu Date: Mon, 6 Mar 2017 17:03:58 +0100 Message-ID: <20170306170358.52a3ff37@jawa> References: <1488813822-26042-1-git-send-email-d-gerlach@ti.com> <1488813822-26042-4-git-send-email-d-gerlach@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1488813822-26042-4-git-send-email-d-gerlach@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Dave Gerlach Cc: Nishanth Menon , devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Tony Lindgren , Viresh Kumar , Yegor Yefremov , Rob Herring , linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org On Mon, 6 Mar 2017 09:23:40 -0600 Dave Gerlach wrote: > The operatings-points-v2 table for am4372 was merged before any user > of it was present in the kernel and before the binding had been > finalized. The new ti-cpufreq driver and binding expects the platform > specific properties to be part of the operating-points-v2 table > rather than the cpu node so let's move them there as the only user is > the ti-cpufreq driver. > > Signed-off-by: Dave Gerlach Reviewed-by: Lukasz Majewski > --- > arch/arm/boot/dts/am4372.dtsi | 7 +++---- > 1 file changed, 3 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/am4372.dtsi > b/arch/arm/boot/dts/am4372.dtsi index 97fcaf415de1..176e09e9a45e > 100644 --- a/arch/arm/boot/dts/am4372.dtsi > +++ b/arch/arm/boot/dts/am4372.dtsi > @@ -50,15 +50,14 @@ > clock-names = "cpu"; > > operating-points-v2 = <&cpu0_opp_table>; > - ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>; > - ti,syscon-rev = <&scm_conf 0x600>; > > clock-latency = <300000>; /* From > omap-cpufreq driver */ }; > }; > > - cpu0_opp_table: opp_table0 { > - compatible = "operating-points-v2"; > + cpu0_opp_table: opp-table { > + compatible = "operating-points-v2-ti-cpu"; > + syscon = <&scm_conf>; > > opp50@300000000 { > opp-hz = /bits/ 64 <300000000>; Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de