devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/2] ARM: dts: msm8974: Hook up adsp-pil's xo clock
@ 2017-03-07  2:22 Jonathan Neuschäfer
  2017-03-07  2:22 ` [PATCH v2 2/2] ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers Jonathan Neuschäfer
  0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Neuschäfer @ 2017-03-07  2:22 UTC (permalink / raw)
  To: linux-arm-msm
  Cc: Bjorn Andersson, Andy Gross, David Brown, devicetree,
	linux-kernel, Jonathan Neuschäfer

Without this patch (and with CONFIG_QCOM_ADSP_PIL), I get this error:

	[    0.711529] qcom_adsp_pil adsp-pil: failed to get xo clock
	[    0.711540] remoteproc remoteproc0: releasing adsp-pil

With this patch, adsp-pil can initialize correctly.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

---
v2:
* Add Bjorn Andersson's R-b
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d3e1a61b8671..cccd8cba8872 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -250,6 +250,9 @@
 
 		cx-supply = <&pm8841_s2>;
 
+		clocks = <&xo_board>;
+		clock-names = "xo";
+
 		memory-region = <&adsp_region>;
 
 		qcom,smem-states = <&adsp_smp2p_out 0>;
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 2+ messages in thread

* [PATCH v2 2/2] ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers
  2017-03-07  2:22 [PATCH v2 1/2] ARM: dts: msm8974: Hook up adsp-pil's xo clock Jonathan Neuschäfer
@ 2017-03-07  2:22 ` Jonathan Neuschäfer
  0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Neuschäfer @ 2017-03-07  2:22 UTC (permalink / raw)
  To: linux-arm-msm
  Cc: Bjorn Andersson, Andy Gross, David Brown, devicetree,
	linux-kernel, Jonathan Neuschäfer

An adsp-pil node is present in at least the MSM8974 SoC. Simply enable
all Qualcomm remoteproc drivers to avoid more work in the future.

The SMP2P driver is required for adsp-pil to initialize correctly.

Enable the SMSM driver at Bjorn Andersson's request: "We also need
CONFIG_QCOM_SMSM=y here, its currently used to signal state of the ring
buffers for WiFi."

CONFIG_QCOM_WCNSS_CTRL is required to load firmware/configuration data
into the WCNSS core, which handles WiFi and Bluetooth.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

---
v2:
* Extend the commit message
* Enable CONFIG_QCOM_SMSM and add Bjorn Andersson's A-b
* Enable CONFIG_QCOM_WCNSS_CTRL as well
---
 arch/arm/configs/qcom_defconfig | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 4ffdd607205d..07666a7a9de5 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -190,11 +190,18 @@ CONFIG_MDM_LCC_9615=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
 CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_REMOTEPROC=y
+CONFIG_QCOM_ADSP_PIL=y
+CONFIG_QCOM_Q6V5_PIL=y
+CONFIG_QCOM_WCNSS_PIL=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_PM=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD=y
 CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
+CONFIG_QCOM_WCNSS_CTRL=y
 CONFIG_IIO=y
 CONFIG_IIO_BUFFER_CB=y
 CONFIG_IIO_SW_TRIGGER=y
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2017-03-07  2:22 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-03-07  2:22 [PATCH v2 1/2] ARM: dts: msm8974: Hook up adsp-pil's xo clock Jonathan Neuschäfer
2017-03-07  2:22 ` [PATCH v2 2/2] ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers Jonathan Neuschäfer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).