[PATCH v4 0/3] dmaengine: cppi41: Add dma support to da8xx

[PATCH v4 0/3] dmaengine: cppi41: Add dma support to da8xx

[Alexandre Bailon]

This series add support of DA8xx to CPPI 4.1 driver.
As the CPPI 4.1 is now generic, we only had to add the glue for DA8xx.

This serie should applied on top of 
"[PATCH v3 0/7] dmaengine: cppi41: Make CPPI 4.1 driver more generic".

Changes in v4:
 - Fix the address overlaping between usb and cppi41 nodes.

Changes in v3:
 - Fix few typos
 - Don't use a wildcard for the compatible property

Changes in v2:
- most of patches of v1 has been moved to the series
  "[PATCH v2 0/7] dmaengine: cppi41: Make CPPI 4.1 driver more generic".
- some patches of v1 has been removed because they were no required
  anymore because CPPI 4.1 driver has been made more generic.
- In v1, the driver were managing the clock for DA8xx paltform.
  This is not needed as CPPI 4.1 will be a child of MUSB DA8xx glue,
  we can use PM runtime and let the DA8xx glue driver manage it.

Alexandre Bailon (3):
  dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller
  dmaengine: cppi41: Add support of DA8xx to CPPI 4.1
  dmaengine: cppi41: Fix teardown warnings

 .../devicetree/bindings/usb/da8xx-usb.txt          | 41 +++++++++++++++++++++-
 drivers/dma/Kconfig                                |  6 ++--
 drivers/dma/cppi41.c                               | 27 ++++++++++++--
 3 files changed, 68 insertions(+), 6 deletions(-)

-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 1/3] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller

[Alexandre Bailon]

DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx CPPI 4.1 DMA controller.

Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 .../devicetree/bindings/usb/da8xx-usb.txt          | 41 +++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
index ccb844a..717c5f6 100644
--- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -18,10 +18,26 @@ Required properties:
 
  - phy-names: Should be "usb-phy"
 
+ - dmas: specifies the dma channels
+
+ - dma-names: specifies the names of the channels. Use "rxN" for receive
+   and "txN" for transmit endpoints. N specifies the endpoint number.
+
 Optional properties:
 ~~~~~~~~~~~~~~~~~~~~
  - vbus-supply: Phandle to a regulator providing the USB bus power.
 
+DMA
+~~~
+- compatible: ti,da830-cppi41
+- reg: offset and length of the following register spaces: CPPI DMA Controller,
+  CPPI DMA Scheduler, Queue Manager
+- reg-names: "controller", "scheduler", "queuemgr"
+- #dma-cells: should be set to 2. The first number represents the
+  channel number (0 … 3 for endpoints 1 … 4).
+  The second number is 0 for RX and 1 for TX transfers.
+- #dma-channels: should be set to 4 representing the 4 endpoints.
+
 Example:
 	usb_phy: usb-phy {
 		compatible = "ti,da830-usb-phy";
@@ -30,7 +46,10 @@ Example:
 	};
 	usb0: usb@200000 {
 		compatible = "ti,da830-musb";
-		reg =   <0x00200000 0x10000>;
+		reg = <0x00200000 0x1000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
 		interrupts = <58>;
 		interrupt-names = "mc";
 
@@ -39,5 +58,25 @@ Example:
 		phys = <&usb_phy 0>;
 		phy-names = "usb-phy";
 
+		dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+			&cppi41dma 2 0 &cppi41dma 3 0
+			&cppi41dma 0 1 &cppi41dma 1 1
+			&cppi41dma 2 1 &cppi41dma 3 1>;
+		dma-names =
+			"rx1", "rx2", "rx3", "rx4",
+			"tx1", "tx2", "tx3", "tx4";
+
 		status = "okay";
+
+		cppi41dma: dma-controller@201000 {
+			compatible = "ti,da830-cppi41";
+			reg =  <0x201000 0x1000
+				0x202000 0x1000
+				0x204000 0x4000>;
+			reg-names = "controller", "scheduler", "queuemgr";
+			interrupts = <58>;
+			#dma-cells = <2>;
+			#dma-channels = <4>;
+		};
+
 	};
-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 2/3] dmaengine: cppi41: Add support of DA8xx to CPPI 4.1

[Alexandre Bailon]

The DA8xx has a CPPI 4.1 DMA controller.
This is add the glue layer required to make it work on DA8xx.

Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 drivers/dma/Kconfig  |  6 +++---
 drivers/dma/cppi41.c | 23 +++++++++++++++++++++++
 2 files changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 0d6a96e..2a31e1a 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -514,12 +514,12 @@ config TIMB_DMA
 	  Enable support for the Timberdale FPGA DMA engine.
 
 config TI_CPPI41
-	tristate "AM33xx CPPI41 DMA support"
-	depends on ARCH_OMAP
+	tristate "CPPI 4.1 DMA support"
+	depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX)
 	select DMA_ENGINE
 	help
 	  The Communications Port Programming Interface (CPPI) 4.1 DMA engine
-	  is currently used by the USB driver on AM335x platforms.
+	  is currently used by the USB driver on AM335x and DA8xx platforms.
 
 config TI_DMA_CROSSBAR
 	bool
diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
index 21a4f79..5c501da 100644
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/cppi41.c
@@ -221,6 +221,20 @@ static const struct chan_queues am335x_usb_queues_rx[] = {
 	[29] = { .submit = 30, .complete = 155},
 };
 
+static const struct chan_queues da8xx_usb_queues_tx[] = {
+	[0] = { .submit =  16, .complete = 24},
+	[1] = { .submit =  18, .complete = 24},
+	[2] = { .submit =  20, .complete = 24},
+	[3] = { .submit =  22, .complete = 24},
+};
+
+static const struct chan_queues da8xx_usb_queues_rx[] = {
+	[0] = { .submit =  1, .complete = 26},
+	[1] = { .submit =  3, .complete = 26},
+	[2] = { .submit =  5, .complete = 26},
+	[3] = { .submit =  7, .complete = 26},
+};
+
 struct cppi_glue_infos {
 	const struct chan_queues *queues_rx;
 	const struct chan_queues *queues_tx;
@@ -949,8 +963,17 @@ static const struct cppi_glue_infos am335x_usb_infos = {
 	.qmgr_num_pend = 5,
 };
 
+static const struct cppi_glue_infos da8xx_usb_infos = {
+	.queues_rx = da8xx_usb_queues_rx,
+	.queues_tx = da8xx_usb_queues_tx,
+	.td_queue = { .submit = 31, .complete = 0 },
+	.first_completion_queue = 24,
+	.qmgr_num_pend = 2,
+};
+
 static const struct of_device_id cppi41_dma_ids[] = {
 	{ .compatible = "ti,am3359-cppi41", .data = &am335x_usb_infos},
+	{ .compatible = "ti,da830-cppi41", .data = &da8xx_usb_infos},
 	{},
 };
 MODULE_DEVICE_TABLE(of, cppi41_dma_ids);
-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] dmaengine: cppi41: Fix teardown warnings

[Alexandre Bailon]

During the teardown of a RX channel, because there is only one
completion queue available for RX channel, descriptor of another
channel may be popped which will cause 2 warnings:
- the first one because we popped a wrong descriptor
  (neither the channel's descriptor, nor the teardown descriptor).
- the second one happen during the teardown of another channel,
  because we can't find the channel descriptor
  (that is, the one that caused the first warning).
To avoid that, use one free queue instead of a transmit completion queue.

Note that fix doesn't fix all the teardown warnings:
I still get some when I run some corner case.

Signed-off-by: Alexandre Bailon <abailon-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
---
 drivers/dma/cppi41.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
index 5c501da..9fdd824 100644
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/cppi41.c
@@ -629,7 +629,7 @@ static int cppi41_tear_down_chan(struct cppi41_channel *c)
 		if (!c->is_tx) {
 			reg |= GCR_STARV_RETRY;
 			reg |= GCR_DESC_TYPE_HOST;
-			reg |= c->q_comp_num;
+			reg |= cdd->td_queue.complete;
 		}
 		reg |= GCR_TEARDOWN;
 		cppi_writel(reg, c->gcr_reg);
@@ -640,7 +640,7 @@ static int cppi41_tear_down_chan(struct cppi41_channel *c)
 	if (!c->td_seen || !c->td_desc_seen) {
 
 		desc_phys = cppi41_pop_desc(cdd, cdd->td_queue.complete);
-		if (!desc_phys)
+		if (!desc_phys && c->is_tx)
 			desc_phys = cppi41_pop_desc(cdd, c->q_comp_num);
 
 		if (desc_phys == c->desc_phys) {
-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 0/3] dmaengine: cppi41: Add dma support to da8xx

[Vinod Koul]

On Mon, Jan 30, 2017 at 06:49:18PM +0100, Alexandre Bailon wrote:
> This series add support of DA8xx to CPPI 4.1 driver.
> As the CPPI 4.1 is now generic, we only had to add the glue for DA8xx.

Applied this one as well, thanks

-- 
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html