Re: [PATCH V3 4/4] dts/imx6q-b850v3: Use megachips-stdpxxxx-ge-b850v3-fw bridges (LVDS-DP++)

[Peter Senna Tschudin <peter.senna@collabora.com>]

On Fri, Mar 03, 2017 at 04:57:10PM +0100, Peter Senna Tschudin wrote:

Hi Shawn Guo,

Now that the driver and binding are in, can you pick this up?

Thank you!

> Configures the megachips-stdpxxxx-ge-b850v3-fw bridges on the GE
> B850v3 dts file.
> 
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Martyn Welch <martyn.welch@collabora.co.uk>
> Cc: Martin Donnelly <martin.donnelly@ge.com>
> Cc: Javier Martinez Canillas <javier@dowhile0.org>
> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
> ---
> Unchanged since V1.
> 
>  arch/arm/boot/dts/imx6q-b850v3.dts | 68 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
> index b237429..3ec54da 100644
> --- a/arch/arm/boot/dts/imx6q-b850v3.dts
> +++ b/arch/arm/boot/dts/imx6q-b850v3.dts
> @@ -72,6 +72,13 @@
>  		fsl,data-mapping = "spwg";
>  		fsl,data-width = <24>;
>  		status = "okay";
> +
> +		port@4 {
> +			reg = <4>;
> +			lvds0_out: endpoint {
> +				remote-endpoint = <&stdp4028_in>;
> +			};
> +		};
>  	};
>  };
>  
> @@ -146,3 +153,64 @@
>  &usdhc2 {
>  	status = "disabled";
>  };
> +
> +&mux2_i2c2 {
> +	status = "okay";
> +	clock-frequency = <100000>;
> +
> +	stdp4028@73 {
> +		compatible = "megachips,stdp4028-ge-b850v3-fw";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reg = <0x73>;
> +
> +		interrupt-parent = <&gpio2>;
> +		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				stdp4028_in: endpoint {
> +					remote-endpoint = <&lvds0_out>;
> +				};
> +			};
> +			port@1 {
> +				reg = <1>;
> +				stdp4028_out: endpoint {
> +					remote-endpoint = <&stdp2690_in>;
> +				};
> +			};
> +		};
> +	};
> +
> +	stdp2690@72 {
> +		compatible = "megachips,stdp2690-ge-b850v3-fw";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reg = <0x72>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				stdp2690_in: endpoint {
> +					remote-endpoint = <&stdp4028_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				stdp2690_out: endpoint {
> +					/* Connector for external display */
> +				};
> +			};
> +		};
> +	};
> +};
> -- 
> 2.9.3
>