Re: [PATCH 14/15] ARM: sun5i: a10s: Add the HDMI controller node

[Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 3618 bytes --]

1;4601;0c
On Wed, Mar 08, 2017 at 11:35:39AM +0800, Chen-Yu Tsai wrote:
> Hi,
> 
> On Tue, Mar 7, 2017 at 4:56 PM, Maxime Ripard
> <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:
> > The A10s has an HDMI controller connected to the second TCON channel. Add
> > it to our DT.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> > ---
> >  arch/arm/boot/dts/sun5i-a10s.dtsi | 34 ++++++++++++++++++++++++++++++++-
> >  arch/arm/boot/dts/sun5i.dtsi      |  1 +-
> >  2 files changed, 35 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
> > index 074485782a4a..3482c9d2b120 100644
> > --- a/arch/arm/boot/dts/sun5i-a10s.dtsi
> > +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
> > @@ -72,7 +72,33 @@
> >                 };
> >         };
> >
> > +       display-engine {
> > +               compatible = "allwinner,sun5i-a10s-display-engine",
> > +                            "allwinner,sun5i-a13-display-engine";
> > +               allwinner,pipelines = <&fe0>;
> > +       };
> > +
> >         soc@01c00000 {
> > +               hdmi0: hdmi@01c16000 {
> 
> Nit: is the 0 suffix needed? I don't see any indication that there is
> a second controller.
> 
> > +                       compatible = "allwinner,sun5i-a10s-hdmi";
> > +                       reg = <0x01c16000 0x1000>;
> > +                       clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
> > +                                <&ccu CLK_PLL_VIDEO0_2X>,
> > +                                <&ccu CLK_PLL_VIDEO1_2X>;
> > +                       clock-names = "ahb", "mod", "pll-0", "pll-1";
> > +                       status = "disabled";
> > +
> > +                       port {
> > +                               #address-cells = <1>;
> > +                               #size-cells = <0>;
> > +
> > +                               hdmi0_in_tcon0: endpoint@0 {
> > +                                       reg = <0>;
> > +                                       remote-endpoint = <&tcon0_out_hdmi0>;
> > +                               };
> > +                       };
> > +               };
> > +
> >                 pwm: pwm@01c20e00 {
> >                         compatible = "allwinner,sun5i-a10s-pwm";
> >                         reg = <0x01c20e00 0xc>;
> > @@ -129,3 +155,11 @@
> >
> >  &sram_a {
> >  };
> > +
> > +&tcon0_out {
> > +       tcon0_out_hdmi0: endpoint@2 {
> > +               reg = <2>;
> > +               remote-endpoint = <&hdmi0_in_tcon0>;
> > +               allwinner,tcon-channel = <1>;
> > +       };
> > +};
> > diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
> > index f3b6e19244f9..3d009b2aa42a 100644
> > --- a/arch/arm/boot/dts/sun5i.dtsi
> > +++ b/arch/arm/boot/dts/sun5i.dtsi
> > @@ -273,6 +273,7 @@
> >                                         tcon0_out_tve0: endpoint@1 {
> >                                                 reg = <1>;
> >                                                 remote-endpoint = <&tve0_in_tcon0>;
> > +                                               allwinner,tcon-channel = <1>;
> 
> This looks like a separate patch, probably following the binding
> change?

I don't know, the binding says that without anything specified, reg
would be used. I was assuming that we only needed it once we had the
new endpoint to make it consistent, therefore it didn't need an extra
patch.

But I can definitely create one if you want.
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com