[PATCH v6 0/3] watchdog: add wdt and reset for renesas r7s72100

[PATCH v6 0/3] watchdog: add wdt and reset for renesas r7s72100

[Chris Brandt]

Some Renesas SoCs do not have a reset register and the only way to do a SW
controlled reset is to use the watchdog timer. So while this series started
out by only adding a reset feature, now it's a full watchdog timer driver that
includes a reset handler.

The longest WDT overflow you can get with a RZ/A1 (R7S72100) with its 8-bit
wide counter is 125ms. Not very long.

However, by setting max_hw_heartbeat_ms, the watchdog core will now handle
pinging the WDT automatically and allow the user to set times as big as they
want. Therefore, the default timeout for this driver is 30 seconds.

Of course if system interrupts are disabled too long and wdt can't be pinged
by the watchdog core, then the system will reset before the user specified
timeout. But hey, it's better nothing.

This driver was tested on an RZ/A1 RSK board using watchdog-simple.c from
samples/watchdog/.

v6:
* rza_wdt.c changes only
* added #include <linux/bitops.h>
* alphabetized #include list
* removed call to platform_set_drvdata

v5:
* rza_wdt.c changes only
* removed extra lines from file header comments
* changed (1<<#) to BIT(#)
* changed #define WTSCR_CKS(i) i to (i)
* changed format to #define SOMETHING<tab>value (and align values)
* now check if clock rate < 16384
* added space before and after '/' for "(1000 * U8_MAX) / rate"
* changed dev_info to dev_dbg for printing max_hw_heartbeat_ms
* added watchdog_init_timeout() for user to set timeout in DT
* switched to using devm_watchdog_register_device()
* added error message if register fails
* simplified rza_wdt_probe() return
* removed function rza_wdt_remove()

v4:
* r7s72100.dtsi: changed from timer@ to watchdog@

v3:
* changed from a reset driver to a watchdog timer driver
* use udelay(20) instead of msleep for reset handler
* added Reviewed-by for r7s72100.dtsi and renesas-wdt.txt
* added Acked-by for renesas-wdt.txt

v2:
* added to renesas-wdt.txt instead of creating a new file
* changed "renesas,r7s72100-reset" to "renesas,r7s72100-wdt"
* changed "renesas,wdt-reset" to "renesas,rza-wdt"
* added "renesas,rza-wdt" as a fallback
* added interupt property (even though it is not used)
* added clocks property
* changed hard coded register values to defines
* added msleep to while(1) loop
* removed unnecessary #include files
* added Reviewed-by: Geert Uytterhoeven for renesas-reset.c

Chris Brandt (3):
  watchdog: add rza_wdt driver
  watchdog: renesas-wdt: add support for rza
  ARM: dts: r7s72100: Add watchdog timer

 .../devicetree/bindings/watchdog/renesas-wdt.txt   |   4 +-
 arch/arm/boot/dts/r7s72100.dtsi                    |   7 +
 drivers/watchdog/Kconfig                           |   8 +
 drivers/watchdog/Makefile                          |   1 +
 drivers/watchdog/rza_wdt.c                         | 199 +++++++++++++++++++++
 5 files changed, 218 insertions(+), 1 deletion(-)
 create mode 100644 drivers/watchdog/rza_wdt.c

-- 
2.10.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 1/3] watchdog: add rza_wdt driver

[Chris Brandt]

Adds a watchdog timer driver for the Renesas RZ/A Series SoCs. A reset
handler is also included since a WDT overflow is the only method for
restarting an RZ/A SoC.

Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
---
v3:
* added #include <linux/bitops.h>
* alphabetized #include list
* removed call to platform_set_drvdata
v2:
* removed extra lines from file header comments
* changed (1<<#) to BIT(#)
* changed #define WTSCR_CKS(i) i to (i)
* changed format to #define SOMETHING<tab>value (and align values)
* now check if clock rate < 16384
* added space before and after '/' for "(1000 * U8_MAX) / rate"
* changed dev_info to dev_dbg for printing max_hw_heartbeat_ms
* added watchdog_init_timeout() for user to set timeout in DT
* switched to using devm_watchdog_register_device()
* added error message if register fails
* simplified rza_wdt_probe() return
* removed function rza_wdt_remove()
---
 drivers/watchdog/Kconfig   |   8 ++
 drivers/watchdog/Makefile  |   1 +
 drivers/watchdog/rza_wdt.c | 199 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 208 insertions(+)
 create mode 100644 drivers/watchdog/rza_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index acb00b5..123c516 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -701,6 +701,14 @@ config RENESAS_WDT
 	  This driver adds watchdog support for the integrated watchdogs in the
 	  Renesas R-Car and other SH-Mobile SoCs (usually named RWDT or SWDT).
 
+config RENESAS_RZAWDT
+	tristate "Renesas RZ/A WDT Watchdog"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  This driver adds watchdog support for the integrated watchdogs in the
+	  Renesas RZ/A SoCs. These watchdogs can be used to reset a system.
+
 config ASPEED_WATCHDOG
 	tristate "Aspeed 2400 watchdog support"
 	depends on ARCH_ASPEED || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 0c3d35e..84b897c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -81,6 +81,7 @@ obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
 obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
 obj-$(CONFIG_ATLAS7_WATCHDOG) += atlas7_wdt.o
 obj-$(CONFIG_RENESAS_WDT) += renesas_wdt.o
+obj-$(CONFIG_RENESAS_RZAWDT) += rza_wdt.o
 obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o
 
 # AVR32 Architecture
diff --git a/drivers/watchdog/rza_wdt.c b/drivers/watchdog/rza_wdt.c
new file mode 100644
index 0000000..e618218
--- /dev/null
+++ b/drivers/watchdog/rza_wdt.c
@@ -0,0 +1,199 @@
+/*
+ * Renesas RZ/A Series WDT Driver
+ *
+ * Copyright (C) 2017 Renesas Electronics America, Inc.
+ * Copyright (C) 2017 Chris Brandt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define DEFAULT_TIMEOUT		30
+
+/* Watchdog Timer Registers */
+#define WTCSR			0
+#define WTCSR_MAGIC		0xA500
+#define WTSCR_WT		BIT(6)
+#define WTSCR_TME		BIT(5)
+#define WTSCR_CKS(i)		(i)
+
+#define WTCNT			2
+#define WTCNT_MAGIC		0x5A00
+
+#define WRCSR			4
+#define WRCSR_MAGIC		0x5A00
+#define WRCSR_RSTE		BIT(6)
+#define WRCSR_CLEAR_WOVF	0xA500	/* special value */
+
+struct rza_wdt {
+	struct watchdog_device wdev;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static int rza_wdt_start(struct watchdog_device *wdev)
+{
+	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
+
+	/* Stop timer */
+	writew(WTCSR_MAGIC | 0, priv->base + WTCSR);
+
+	/* Must dummy read WRCSR:WOVF at least once before clearing */
+	readb(priv->base + WRCSR);
+	writew(WRCSR_CLEAR_WOVF, priv->base + WRCSR);
+
+	/*
+	 * Start timer with slowest clock source and reset option enabled.
+	 */
+	writew(WRCSR_MAGIC | WRCSR_RSTE, priv->base + WRCSR);
+	writew(WTCNT_MAGIC | 0, priv->base + WTCNT);
+	writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME | WTSCR_CKS(7),
+	       priv->base + WTCSR);
+
+	return 0;
+}
+
+static int rza_wdt_stop(struct watchdog_device *wdev)
+{
+	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
+
+	writew(WTCSR_MAGIC | 0, priv->base + WTCSR);
+
+	return 0;
+}
+
+static int rza_wdt_ping(struct watchdog_device *wdev)
+{
+	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
+
+	writew(WTCNT_MAGIC | 0, priv->base + WTCNT);
+
+	return 0;
+}
+
+static int rza_wdt_restart(struct watchdog_device *wdev, unsigned long action,
+			    void *data)
+{
+	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
+
+	/* Stop timer */
+	writew(WTCSR_MAGIC | 0, priv->base + WTCSR);
+
+	/* Must dummy read WRCSR:WOVF at least once before clearing */
+	readb(priv->base + WRCSR);
+	writew(WRCSR_CLEAR_WOVF, priv->base + WRCSR);
+
+	/*
+	 * Start timer with fastest clock source and only 1 clock left before
+	 * overflow with reset option enabled.
+	 */
+	writew(WRCSR_MAGIC | WRCSR_RSTE, priv->base + WRCSR);
+	writew(WTCNT_MAGIC | 255, priv->base + WTCNT);
+	writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME, priv->base + WTCSR);
+
+	/*
+	 * Actually make sure the above sequence hits hardware before sleeping.
+	 */
+	wmb();
+
+	/* Wait for WDT overflow (reset) */
+	udelay(20);
+
+	return 0;
+}
+
+static const struct watchdog_info rza_wdt_ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
+	.identity = "Renesas RZ/A WDT Watchdog",
+};
+
+static const struct watchdog_ops rza_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = rza_wdt_start,
+	.stop = rza_wdt_stop,
+	.ping = rza_wdt_ping,
+	.restart = rza_wdt_restart,
+};
+
+static int rza_wdt_probe(struct platform_device *pdev)
+{
+	struct rza_wdt *priv;
+	struct resource *res;
+	unsigned long rate;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	rate = clk_get_rate(priv->clk);
+	if (rate < 16384) {
+		dev_err(&pdev->dev, "invalid clock rate (%ld)\n", rate);
+		return -ENOENT;
+	}
+
+	/* Assume slowest clock rate possible (CKS=7) */
+	rate /= 16384;
+
+	priv->wdev.info = &rza_wdt_ident,
+	priv->wdev.ops = &rza_wdt_ops,
+	priv->wdev.parent = &pdev->dev;
+
+	/*
+	 * Since the max possible timeout of our 8-bit count register is less
+	 * than a second, we must use max_hw_heartbeat_ms.
+	 */
+	priv->wdev.max_hw_heartbeat_ms = (1000 * U8_MAX) / rate;
+	dev_dbg(&pdev->dev, "max hw timeout of %dms\n",
+		 priv->wdev.max_hw_heartbeat_ms);
+
+	priv->wdev.min_timeout = 1;
+	priv->wdev.timeout = DEFAULT_TIMEOUT;
+
+	watchdog_init_timeout(&priv->wdev, 0, &pdev->dev);
+	watchdog_set_drvdata(&priv->wdev, priv);
+
+	ret = devm_watchdog_register_device(&pdev->dev, &priv->wdev);
+	if (ret)
+		dev_err(&pdev->dev, "Cannot register watchdog device\n");
+
+	return ret;
+}
+
+static const struct of_device_id rza_wdt_of_match[] = {
+	{ .compatible = "renesas,rza-wdt", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rza_wdt_of_match);
+
+static struct platform_driver rza_wdt_driver = {
+	.probe = rza_wdt_probe,
+	.driver = {
+		.name = "rza_wdt",
+		.of_match_table = rza_wdt_of_match,
+	},
+};
+
+module_platform_driver(rza_wdt_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/A WDT Driver");
+MODULE_AUTHOR("Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>");
+MODULE_LICENSE("GPL v2");
-- 
2.10.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 1/3] watchdog: add rza_wdt driver

[Guenter Roeck]

On 03/04/2017 02:37 PM, Chris Brandt wrote:
> Adds a watchdog timer driver for the Renesas RZ/A Series SoCs. A reset
> handler is also included since a WDT overflow is the only method for
> restarting an RZ/A SoC.
>
> Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>

Reviewed-by: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>

> ---
> v3:
> * added #include <linux/bitops.h>
> * alphabetized #include list
> * removed call to platform_set_drvdata
> v2:
> * removed extra lines from file header comments
> * changed (1<<#) to BIT(#)
> * changed #define WTSCR_CKS(i) i to (i)
> * changed format to #define SOMETHING<tab>value (and align values)
> * now check if clock rate < 16384
> * added space before and after '/' for "(1000 * U8_MAX) / rate"
> * changed dev_info to dev_dbg for printing max_hw_heartbeat_ms
> * added watchdog_init_timeout() for user to set timeout in DT
> * switched to using devm_watchdog_register_device()
> * added error message if register fails
> * simplified rza_wdt_probe() return
> * removed function rza_wdt_remove()
> ---
>  drivers/watchdog/Kconfig   |   8 ++
>  drivers/watchdog/Makefile  |   1 +
>  drivers/watchdog/rza_wdt.c | 199 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 208 insertions(+)
>  create mode 100644 drivers/watchdog/rza_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index acb00b5..123c516 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -701,6 +701,14 @@ config RENESAS_WDT
>  	  This driver adds watchdog support for the integrated watchdogs in the
>  	  Renesas R-Car and other SH-Mobile SoCs (usually named RWDT or SWDT).
>
> +config RENESAS_RZAWDT
> +	tristate "Renesas RZ/A WDT Watchdog"
> +	depends on ARCH_RENESAS || COMPILE_TEST
> +	select WATCHDOG_CORE
> +	help
> +	  This driver adds watchdog support for the integrated watchdogs in the
> +	  Renesas RZ/A SoCs. These watchdogs can be used to reset a system.
> +
>  config ASPEED_WATCHDOG
>  	tristate "Aspeed 2400 watchdog support"
>  	depends on ARCH_ASPEED || COMPILE_TEST
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 0c3d35e..84b897c 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -81,6 +81,7 @@ obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
>  obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
>  obj-$(CONFIG_ATLAS7_WATCHDOG) += atlas7_wdt.o
>  obj-$(CONFIG_RENESAS_WDT) += renesas_wdt.o
> +obj-$(CONFIG_RENESAS_RZAWDT) += rza_wdt.o
>  obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o
>
>  # AVR32 Architecture
> diff --git a/drivers/watchdog/rza_wdt.c b/drivers/watchdog/rza_wdt.c
> new file mode 100644
> index 0000000..e618218
> --- /dev/null
> +++ b/drivers/watchdog/rza_wdt.c
> @@ -0,0 +1,199 @@
> +/*
> + * Renesas RZ/A Series WDT Driver
> + *
> + * Copyright (C) 2017 Renesas Electronics America, Inc.
> + * Copyright (C) 2017 Chris Brandt
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License.  See the file "COPYING" in the main directory of this archive
> + * for more details.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/watchdog.h>
> +
> +#define DEFAULT_TIMEOUT		30
> +
> +/* Watchdog Timer Registers */
> +#define WTCSR			0
> +#define WTCSR_MAGIC		0xA500
> +#define WTSCR_WT		BIT(6)
> +#define WTSCR_TME		BIT(5)
> +#define WTSCR_CKS(i)		(i)
> +
> +#define WTCNT			2
> +#define WTCNT_MAGIC		0x5A00
> +
> +#define WRCSR			4
> +#define WRCSR_MAGIC		0x5A00
> +#define WRCSR_RSTE		BIT(6)
> +#define WRCSR_CLEAR_WOVF	0xA500	/* special value */
> +
> +struct rza_wdt {
> +	struct watchdog_device wdev;
> +	void __iomem *base;
> +	struct clk *clk;
> +};
> +
> +static int rza_wdt_start(struct watchdog_device *wdev)
> +{
> +	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
> +
> +	/* Stop timer */
> +	writew(WTCSR_MAGIC | 0, priv->base + WTCSR);
> +
> +	/* Must dummy read WRCSR:WOVF at least once before clearing */
> +	readb(priv->base + WRCSR);
> +	writew(WRCSR_CLEAR_WOVF, priv->base + WRCSR);
> +
> +	/*
> +	 * Start timer with slowest clock source and reset option enabled.
> +	 */
> +	writew(WRCSR_MAGIC | WRCSR_RSTE, priv->base + WRCSR);
> +	writew(WTCNT_MAGIC | 0, priv->base + WTCNT);
> +	writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME | WTSCR_CKS(7),
> +	       priv->base + WTCSR);
> +
> +	return 0;
> +}
> +
> +static int rza_wdt_stop(struct watchdog_device *wdev)
> +{
> +	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
> +
> +	writew(WTCSR_MAGIC | 0, priv->base + WTCSR);
> +
> +	return 0;
> +}
> +
> +static int rza_wdt_ping(struct watchdog_device *wdev)
> +{
> +	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
> +
> +	writew(WTCNT_MAGIC | 0, priv->base + WTCNT);
> +
> +	return 0;
> +}
> +
> +static int rza_wdt_restart(struct watchdog_device *wdev, unsigned long action,
> +			    void *data)
> +{
> +	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
> +
> +	/* Stop timer */
> +	writew(WTCSR_MAGIC | 0, priv->base + WTCSR);
> +
> +	/* Must dummy read WRCSR:WOVF at least once before clearing */
> +	readb(priv->base + WRCSR);
> +	writew(WRCSR_CLEAR_WOVF, priv->base + WRCSR);
> +
> +	/*
> +	 * Start timer with fastest clock source and only 1 clock left before
> +	 * overflow with reset option enabled.
> +	 */
> +	writew(WRCSR_MAGIC | WRCSR_RSTE, priv->base + WRCSR);
> +	writew(WTCNT_MAGIC | 255, priv->base + WTCNT);
> +	writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME, priv->base + WTCSR);
> +
> +	/*
> +	 * Actually make sure the above sequence hits hardware before sleeping.
> +	 */
> +	wmb();
> +
> +	/* Wait for WDT overflow (reset) */
> +	udelay(20);
> +
> +	return 0;
> +}
> +
> +static const struct watchdog_info rza_wdt_ident = {
> +	.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
> +	.identity = "Renesas RZ/A WDT Watchdog",
> +};
> +
> +static const struct watchdog_ops rza_wdt_ops = {
> +	.owner = THIS_MODULE,
> +	.start = rza_wdt_start,
> +	.stop = rza_wdt_stop,
> +	.ping = rza_wdt_ping,
> +	.restart = rza_wdt_restart,
> +};
> +
> +static int rza_wdt_probe(struct platform_device *pdev)
> +{
> +	struct rza_wdt *priv;
> +	struct resource *res;
> +	unsigned long rate;
> +	int ret;
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(priv->base))
> +		return PTR_ERR(priv->base);
> +
> +	priv->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(priv->clk))
> +		return PTR_ERR(priv->clk);
> +
> +	rate = clk_get_rate(priv->clk);
> +	if (rate < 16384) {
> +		dev_err(&pdev->dev, "invalid clock rate (%ld)\n", rate);
> +		return -ENOENT;
> +	}
> +
> +	/* Assume slowest clock rate possible (CKS=7) */
> +	rate /= 16384;
> +
> +	priv->wdev.info = &rza_wdt_ident,
> +	priv->wdev.ops = &rza_wdt_ops,
> +	priv->wdev.parent = &pdev->dev;
> +
> +	/*
> +	 * Since the max possible timeout of our 8-bit count register is less
> +	 * than a second, we must use max_hw_heartbeat_ms.
> +	 */
> +	priv->wdev.max_hw_heartbeat_ms = (1000 * U8_MAX) / rate;
> +	dev_dbg(&pdev->dev, "max hw timeout of %dms\n",
> +		 priv->wdev.max_hw_heartbeat_ms);
> +
> +	priv->wdev.min_timeout = 1;
> +	priv->wdev.timeout = DEFAULT_TIMEOUT;
> +
> +	watchdog_init_timeout(&priv->wdev, 0, &pdev->dev);
> +	watchdog_set_drvdata(&priv->wdev, priv);
> +
> +	ret = devm_watchdog_register_device(&pdev->dev, &priv->wdev);
> +	if (ret)
> +		dev_err(&pdev->dev, "Cannot register watchdog device\n");
> +
> +	return ret;
> +}
> +
> +static const struct of_device_id rza_wdt_of_match[] = {
> +	{ .compatible = "renesas,rza-wdt", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rza_wdt_of_match);
> +
> +static struct platform_driver rza_wdt_driver = {
> +	.probe = rza_wdt_probe,
> +	.driver = {
> +		.name = "rza_wdt",
> +		.of_match_table = rza_wdt_of_match,
> +	},
> +};
> +
> +module_platform_driver(rza_wdt_driver);
> +
> +MODULE_DESCRIPTION("Renesas RZ/A WDT Driver");
> +MODULE_AUTHOR("Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>");
> +MODULE_LICENSE("GPL v2");
>

--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 3/3] ARM: dts: r7s72100: Add watchdog timer

[Chris Brandt]

Add watchdog timer support for RZ/A1.
For the RZ/A1, the only way to do a reset is to overflow the WDT, so this
is useful even if you don't need the watchdog functionality.

Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
v4:
* changed from timer@ to watchdog@
v3:
* added Reviewed-by
v2:
* changed "renesas,r7s72100-reset" to "renesas,r7s72100-wdt"
* changed "renesas,wdt-reset" to "renesas,rza-wdt"
* added interupt property (even though it is not used)
* added clocks property
---
 arch/arm/boot/dts/r7s72100.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index ed62e19..22f96b7 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -382,6 +382,13 @@
 		cache-level = <2>;
 	};
 
+	wdt: watchdog@fcfe0000 {
+		compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt";
+		reg = <0xfcfe0000 0x6>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&p0_clk>;
+	};
+
 	i2c0: i2c@fcfee000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.10.1


--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 3/3] ARM: dts: r7s72100: Add watchdog timer

[Guenter Roeck]

On 03/04/2017 02:37 PM, Chris Brandt wrote:
> Add watchdog timer support for RZ/A1.
> For the RZ/A1, the only way to do a reset is to overflow the WDT, so this
> is useful even if you don't need the watchdog functionality.
>
> Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Acked-by: Guenter Roeck <linux@roeck-us.net>

> ---
> v4:
> * changed from timer@ to watchdog@
> v3:
> * added Reviewed-by
> v2:
> * changed "renesas,r7s72100-reset" to "renesas,r7s72100-wdt"
> * changed "renesas,wdt-reset" to "renesas,rza-wdt"
> * added interupt property (even though it is not used)
> * added clocks property
> ---
>  arch/arm/boot/dts/r7s72100.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
> index ed62e19..22f96b7 100644
> --- a/arch/arm/boot/dts/r7s72100.dtsi
> +++ b/arch/arm/boot/dts/r7s72100.dtsi
> @@ -382,6 +382,13 @@
>  		cache-level = <2>;
>  	};
>
> +	wdt: watchdog@fcfe0000 {
> +		compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt";
> +		reg = <0xfcfe0000 0x6>;
> +		interrupts = <GIC_SPI 106 IRQ_TYPE_EDGE_RISING>;
> +		clocks = <&p0_clk>;
> +	};
> +
>  	i2c0: i2c@fcfee000 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>

Re: [PATCH v6 3/3] ARM: dts: r7s72100: Add watchdog timer

[Simon Horman]

On Sun, Mar 05, 2017 at 08:04:57AM -0800, Guenter Roeck wrote:
> On 03/04/2017 02:37 PM, Chris Brandt wrote:
> >Add watchdog timer support for RZ/A1.
> >For the RZ/A1, the only way to do a reset is to overflow the WDT, so this
> >is useful even if you don't need the watchdog functionality.
> >
> >Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> >Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
> 
> Acked-by: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>

Thanks,

as the driver bindings have also been Acked I have queued up this
change for v4.12.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 2/3] watchdog: renesas-wdt: add support for rza

[Chris Brandt]

Describe the WDT hardware in the RZ/A series.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
---
v3:
* Add Acked-by, Reviewed-by.
v2:
* added to renesas-wdt.txt instead of creating a new file
* changed commit title
* added "renesas,rza-wdt" as a fallback
* added interrupts property
---
 Documentation/devicetree/bindings/watchdog/renesas-wdt.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
index da24e31..9e306af 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
@@ -2,10 +2,11 @@ Renesas Watchdog Timer (WDT) Controller
 
 Required properties:
 - compatible : Should be "renesas,<soctype>-wdt", and
-	       "renesas,rcar-gen3-wdt" as fallback.
+	       "renesas,rcar-gen3-wdt" or "renesas,rza-wdt" as fallback.
 	       Examples with soctypes are:
 	         - "renesas,r8a7795-wdt" (R-Car H3)
 	         - "renesas,r8a7796-wdt" (R-Car M3-W)
+	         - "renesas,r7s72100-wdt" (RZ/A1)
 
   When compatible with the generic version, nodes must list the SoC-specific
   version corresponding to the platform first, followed by the generic
@@ -17,6 +18,7 @@ Required properties:
 Optional properties:
 - timeout-sec : Contains the watchdog timeout in seconds
 - power-domains : the power domain the WDT belongs to
+- interrupts: Some WDTs have an interrupt when used in interval timer mode
 
 Examples:
 
-- 
2.10.1

Re: [PATCH v6 2/3] watchdog: renesas-wdt: add support for rza

[Guenter Roeck]

On 03/04/2017 02:37 PM, Chris Brandt wrote:
> Describe the WDT hardware in the RZ/A series.
>
> Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

Reviewed-by: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>

> ---
> v3:
> * Add Acked-by, Reviewed-by.
> v2:
> * added to renesas-wdt.txt instead of creating a new file
> * changed commit title
> * added "renesas,rza-wdt" as a fallback
> * added interrupts property
> ---
>  Documentation/devicetree/bindings/watchdog/renesas-wdt.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
> index da24e31..9e306af 100644
> --- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
> @@ -2,10 +2,11 @@ Renesas Watchdog Timer (WDT) Controller
>
>  Required properties:
>  - compatible : Should be "renesas,<soctype>-wdt", and
> -	       "renesas,rcar-gen3-wdt" as fallback.
> +	       "renesas,rcar-gen3-wdt" or "renesas,rza-wdt" as fallback.
>  	       Examples with soctypes are:
>  	         - "renesas,r8a7795-wdt" (R-Car H3)
>  	         - "renesas,r8a7796-wdt" (R-Car M3-W)
> +	         - "renesas,r7s72100-wdt" (RZ/A1)
>
>    When compatible with the generic version, nodes must list the SoC-specific
>    version corresponding to the platform first, followed by the generic
> @@ -17,6 +18,7 @@ Required properties:
>  Optional properties:
>  - timeout-sec : Contains the watchdog timeout in seconds
>  - power-domains : the power domain the WDT belongs to
> +- interrupts: Some WDTs have an interrupt when used in interval timer mode
>
>  Examples:
>
>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html