Re: [PATCH v5 00/39] i.MX Media Driver

[Russell King - ARM Linux <linux@armlinux.org.uk>]

On Sun, Mar 12, 2017 at 01:36:32PM -0700, Steve Longerbeam wrote:
> But hold on, if my logic is correct, then why did the CSI power-off
> get reached in your case, multiple times? Yes I think there is a bug,
> link_notify() is not checking if the link has already been disabled.
> I will fix this. But I'm surprised media core's link_notify handling
> doesn't do this.

Well, I think there's something incredibly fishy going on here.  I
turned that dev_dbg() at the top of the function into a dev_info(),
and I get:

root@hbi2ex:~# dmesg |grep -A2 imx-ipuv3-csi
[   53.370949] imx-ipuv3-csi imx-ipuv3-csi.0: power OFF
[   53.371015] ------------[ cut here ]------------
[   53.371075] WARNING: CPU: 0 PID: 1515 at drivers/staging/media/imx/imx-media-csi.c:806 csi_s_power+0xb8/0xd0 [imx_media_csi]
--
[   53.372624] imx-ipuv3-csi imx-ipuv3-csi.0: power OFF
[   53.372637] ------------[ cut here ]------------
[   53.372663] WARNING: CPU: 0 PID: 1515 at drivers/staging/media/imx/imx-media-csi.c:806 csi_s_power+0xb8/0xd0 [imx_media_csi]

There isn't a power on event being generated before these two power
off events.  I don't see a power on event even when I attempt to
start streaming either (which fails due to the lack of bayer
support.)

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.